Barium titanate‐based nanodielectrics of two chemically recyclable thermosets

In this work was investigated the effect of the addition of barium titanate (BaTiO₃) on electrical properties of two chemically recyclable thermosets, polyhemiaminal (PHA) and polyhexahydro‐s‐triazine (PHT), both fabricated from 4,4′‐oxydianiline (ODA), an ether derivative of aniline and paraformaldehyde. Thermal and mechanical properties as well as chemical recyclability of the two polymers and their nanocomposites/nanodielectrics were also investigated. In addition, a quantitative analysis was conducted of the nanoparticle dispersion in the PHA‐/PHT‐based BaTiO₃‐containing nanocomposites using transmission electron microscopy imaging and the nearest‐neighbor distance index and this index was used to analyze the investigated properties in connection with the proper mechanisms. Regarding the electrical properties for both neat polymers, conductivity values of the order of 10^?8 S m^?1 at 100 Hz were observed and dielectric constant values close to 2.80 for both polymers at 1 kHz. The addition of 0.5 wt% of BaTiO₃ ferroelectric nanoparticles increased by about 44% the dielectric constant (1 kHz) and conductivity (10² Hz) of the PHA‐based nanocomposite. PHA and PHT exhibited glass transition temperature (T_g) values in the range 125–180 °C. An increase of 7 °C in T_g was observed after the incorporation of 0.5 wt% of BaTiO₃ into PHA. Concerning the mechanical properties, values in the range 4.00–4.45 GPa for reduced modulus and 0.30–0.43 GPa for nanohardness for PHA and PHT polymers were observed. Independently of filler content or polymer matrix, both mechanical properties were enhanced after the addition of BaTiO₃. The chemical recycling of PHA/PHT and all nanocomposites in the initial ODA reagent after sulfuric acid treatment was successfully characterized using the NMR and Fourier transform infrared spectroscopic techniques. © 2018 Society of Chemical Industry     

Molecular weight effect on the obtainment of parallel and perpendicular orientation in thermotropic poly(diethylene glycol <Emphasis Type="Italic">p,p′</Emphasis>-bibenzoate)

Summary The effect of molecular weight on the uniaxial orientation process has been analyzed in two samples of thermotropic poly(diethylene glycol p,p′-bibenzoate), evaluating the influence of that parameter on the type of orientation obtained. Several strain rates and deformation temperatures have been tested in order to map out the conditions for obtaining the two different kinds of orientation. The results show that in the lower molecular weight PDEB sample (M_w=31200) it is rather easy to get exclusively perpendicular “anomalous” orientation, with the molecular axes aligned transversely to the stretching direction. However, it is extremely difficult to obtain 100% parallel “normal” orientation. On the contrary, either type of orientation or a mixture of them can be easily developed for the higher molecular weight PDEB sample (M_w=102900).     

Fungal carriage in lizards

The occurrence of fungi was investigated in the gut of 200 common garden lizards (Agama agama). The most important pathogenic fungus isolated was Basidiobolus haptosporus, an aetiological agent of subcutaneous zygomycosis. It was recovered from the intestinal contents of 112 (56%) lizards. Other important fungi isolated included Aspergillus spp. in 24 (12%) lizards, Candida spp. in 12 (6%), Penicillium spp. in 12 (6%) and Fusarium spp. in 12 (6%). Mucor spp. were isolated from eight (4%) male lizards only. Agamid lizards are plentiful in rural and urban areas of Nigeria. As they live in close vicinity to man, they are likely to play an important role in the spread of disease that may be caused by these fungi and its transmission to man. None of the animals investigated that yielded fungal cultures revealed any external fungal infection.     

The novel inotropic agent CGP 48506 alters force primarily by Ca(2+)-independent mechanisms in porcine skinned trabeculae

OBJECTIVES: The aim was to determine whether, and by what mechanism(s), a novel inotropic agent 5-methyl-6-phenyl-1,3,5,6-tetrahydro-3, 6-methano-1,5-benzodiazocine-2,4-dione (BA 41899) and its enantiomers directly alter the Ca2+ sensitivity of cardiac myofilaments. METHODS: Porcine ventricular trabeculae were permeabilised with Triton X-100. The relationship between force and pCa (-log[Ca2+]) was determined in the presence and absence of ATP. Troponin I was extracted, using vanadate, to produce unregulated maximally activated myofilaments. Force and actomyosin ATPase activity were measured simultaneously to determine tension cost (ATPase activity/tension). The effects of the (+) enantiomer (CGP 48506) on the twitch of intact muscle were demonstrated using rat papillary muscle. RESULTS: 100 microM BA 41899 had a pronounced Ca2+ sensitising effect on force production by porcine skinned cardiac fibres, increasing the pCa required for 50% maximal activation by 0.64 units, while suppressing maximum force by 18.3%. Resting tension was unaffected. These actions were primarily caused by CGP 48506 and were concentration dependent. At concentrations less than 100 microM, CGP 48506 also increased twitch amplitude in intact papillary muscles with no effect on resting tension, whereas 100 microM CGP 48506 increased resting force due to a slowing of relaxation. 100 microM CGP 48506 potentiated Ca(2+)-independent rigor tension in skinned trabeculae, indicating a Ca2+ sensitising mechanism unrelated to Ca2+ binding to troponin C. Tension cost was unaffected by 100 microM CGP 48506 over the entire range of activating Ca2+ concentrations. Suppression of maximum force by CGP 48506 was independent of both Ca2+ concentration and the regulatory troponin complex. CONCLUSIONS: Both the increase in Ca2+ sensitivity during submaximal activation and the depression of maximum force which are induced by CGP 48506 in skinned trabeculae occur at least partly through Ca(2+)-independent mechanisms.     

Kinetic behaviour of muscle LDH immobilized in nylon tubing

Immobilization was carried out of the lactate dehydrogenase (LDH) from rabbit muscle (EC 1.1.1.27), cross-linked through the bifunctional reactive glutar-aldehyde on to nylon tubing (1 m long, 53cm² internal surface area). Immobilized LDH inactivation kinetics are of first order (t_1/2 = 3·6 years, k = 5·4,e^?4 day^?1 to 5°C). The smaller effect of pH on activity than in the case of LDH in solution can be explained on the basis of limitation to proton diffusion towards the support. A limiting effect to free external diffusion of the substrate towards and products from the support was also observed, an effect which seems to determine the effective kinetic behaviour of immobilized LDH. The apparent optimum temperature is centred around 40°C, observing a clear inactivation (thermal denaturation) above this temperature. In the temperature range studied (10–40°C), the co-existence was seen of a kinetic control accompanied by another control, involving diffusional transport of substrates and products, on the global activity of the immobilized enzyme. This makes the Arrhenius profiles curvilinear. Both graphic and statistical non-linear regression analysis of the kinetic data—rate, v, versus substrate concentration [S]—carried out under conditions in which the diffusional limitations can be considered negligible (high recirculation flow rate), permitted investigation of the intrinsic kinetic behaviour of immobilized LDH. In this sense, it can be deduced that the rate equation to which these data seem to be fitted is of the polynomial quotient type in [S] of minimum degree 2:2. Although the diffusional limitations have a marked effect on the type of global kinetics shown by immobilized LDH, temperature was not found to affect its v[S] behaviour. The experimental evidence obtained thus indicates that the rate equation in the 10-40°C temperature range continues to be a rational equation of at least degree 2:2 in [S].     

Familial myeloproliferative syndrome

Familial chronic myeloproliferative syndrome (CMS) was observed in five members from two different generations of the same kindred. Diagnosis included agnogenic myeloid metaplasia (case 1), polycythemia vera (case 2), and essential thrombocythemia (cases 3-5). Cases 1-3 were siblings, case 5 was the daughter of case 1, and case 4 was the cousin of cases 1, 3. Age at diagnosis ranged from 28 to 75 years, cases 1 and 3 were male, and the others were female. The diagnosis was made after an episode of cerebral thrombosis in one patient, during a study for headache and dizziness in another, and fortuitously in the three remainders. All patients had splenomegaly and varying degrees of thrombocytosis. The cytogenetic exam was normal in all four cases. A woman patient was treated with interferon during a pregnancy. Fetal growth was retarded, and the newborn showed bone and genital malformations. No environmental leukemogen factor was found. This familial case strengthens Dameshek's theory of a common pathogenesis of CMS and suggests a genetic and hereditary etiology.     

Design optimization of 3D steel structures: Genetic algorithms vs. classical techniques

In this paper an elitist genetic algorithm (GA) developed by the authors is compared with common commercial solutions for complex structural optimization. After its prior validation on two-dimensional (2D) structures, the GA was tuned and improved in order to obtain structural elements with minimum weights that satisfy the ultimate limit states of the applicable building code. Subsequently, the same spatial structures were optimized using a commercial structural analysis program. Finally, the cost and weight improvements obtained using the GA, although at a higher computational cost, are discussed.     

Hot cutting of goat carcasses following early post-mortem high temperature ageing

Hot cutting of goat sides into bone-in joints, such as leg, shoulder and loin, 3 h after the sides were left hanging at an ambient temperature of 34°C with (treatment II) or without (treatment I) subsequent chilling prior to freezing did not adversely affect colour of meat, tenderness, cooking loss or water-holding capacity compared with normal chilling. The latter process (treatment III) significantly (P < 0·05) increased evaporative weight loss from the sides. Differences in colour, shear force, evaporative weight loss, cooking loss, drip loss from the leg joint and water-holding capacity between treatment I, where sides were hung at room temperature for 3h, and treatment II, where sides were given an additional chilling period of 21h after hanging, were not significant. These findings indicate that, in countries with ambient temperatures above 30°C, goat sides or carcasses can be cut hot after a 3h hanging period at ambient temperature and subsequently frozen without deterioration in the quality or processing properties of the meat.