Re-evaluation of Radiation-Energy Transfer to an Extraction Solvent in a Minor-Actinide-Separation Process Based on Consideration of Radiation Permeability

ABSTRACT

Absorbed-dose estimation is essential for evaluation of the radiation tolerance of minor-actinide-separation processes. We propose a dose-evaluation method based on radiation permeability, with comparisons of heterogeneous structures seen in the solvent-extraction process, such as emulsions forming in the mixture of the organic and aqueous phases. A demonstration of radiation-energy-transfer simulation is performed with a focus on the minor-actinide-recovery process from high-level liquid waste with the aid of the Monte Carlo radiation-transport code PHITS. The simulation results indicate that the dose absorbed by the extraction solvent from alpha radiation depends upon the emulsion structure, and that from beta and gamma radiation depends upon the mixer-settler-apparatus size. Non-negligible contributions of well-permeable gamma rays were indicated in terms of the plant operation of the minor-actinide-separation process.     

Anatase Sol Prepared from Peroxotitanium Complex Aqueous Solution Containing Niobium or Vanadium

Niobium- or vanadium-doped anatase sols were prepared by hydrothermal treatment of 0.1 mol/dm³ peroxotitanium complex aqueous solutions dissolving 0–10 mol% niobium or vanadium at 100°C for 8 h. Niobium-doping caused the increase of lattice constants of anatase and the shape change of anatase crystal from spindle-like to cubic-like structure, but no change of the optical absorbance. Vanadium-doping caused the decrease of lattice constant of c -axis, the miniaturization of anatase crystal and the increase of optical absorbance at the wavelength from 350–700 nm.     

Radiation therapy for stage I-II non-small cell lung cancer in patients aged 75 years and older

Vaccination with peptides that induce a specific immune response is a potential prophylactic or therapeutic strategy against viral infections and tumors. Because of the extensive polymorphism of the HLA loci, synthetic peptide vaccines must consist of a cocktail of peptides that bind specifically to different HLA molecules. Such cocktails should be optimized for the target population as each population has its specific HLA gene frequencies. To achieve maximum population coverage with a minimum number of peptides, information is needed on the ranking of the most frequent HLA phenotypes. We introduce the minimal phenotype panel, which is the smallest combination of HLA antigens selected so that the proportion of individuals in a population that express at least one of the antigens in the panel exceeds a desired minimum value. We developed a method for assembling minimal phenotype panels based on known HLA class I gene frequencies. We give an example based on a set of 2446 well-defined HLA-typed, random, healthy, unrelated, Dutch Caucasoid individuals. In addition, we discuss the possibility of assembling minimal phenotype panels based on two-locus haplotypes, which enables the assembly of phenotype panels from the antigens of both loci.     

Phase fluctuations of cross-polarized signals at 4 GHz in fine weather on earth-space paths

On an earthspace propagation path with the low elevation angle of 10 deg, the phase between co- and crosspolar signals occasionally showed rapid and irregular fluctuations during fine weather. These fluctuations were generally significant during the daytime, and were strongly in phase with the occurrence of the copolar amplitude scintillations. This could be attributed to the combined effects of the crosspolar phase pattern of the receiving antenna and small fluctuations of the angle of arrival of the radiowaves.     

A Fuzzy Expert System for Damage Assessment Using Genetic Algorithms and Neural Networks

Abstract: An efficient knowledge-acquisition support method is required for improvement and maintenance of the knowledge base in durability evaluation of an RC bridge deck. Such a method is proposed in this paper to automatically acquire fuzzy production rules. This method makes joint use of genetic algorithms and a neural network. Using a neural network as a subsystem, the evaluation function of genetic algorithms can be provided with the weights of the neural network. Introducing a neural network into genetic algorithms, it is possible to acquire new knowledge so that the method is useful when it is difficult to acquire knowledge in the field.     

Plastic deformation in a multifunctional Ti-Nb-Ta-Zr-O alloy

Mechanisms for plastic deformation in the newly developed Ti-24 at. pct (Ta + Nb + V)-(Zr,Hf)-O alloys (Gum Metal) were investigated in relation to their unique properties. Transmission electron microscopy revealed that the microstructure after deformation was characterized by highly distorted crystal images, which are accompanied by numerous “giant faults.” Such plastic behavior implies that a large amount of elastic stain energy was stored discretely and hierarchically during cold working. Calculated elastic constants of the Ti-X (Nb,Ta,Mo,V) binary systems predicted that Young’s modulus in 〈001〉 and shear moduli along some directions including slip systems in a bcc crystal were extraordinary small. The low modulus not only well explains the highly distorted microstructure observed in the cold-worked specimens, but also signifies that ideal shear strength of the developed alloys is a very small value, which is close to the practical strength required for plastic deformation in the alloy. This implies that the giant faults observed in the deformed specimen were formed without the aid of dislocation glide.     

Superconductivity in W-containing diamond-like nanocomposite films

Superconductivity in a tungsten-containing carbon-oxide film was reported. The film with 500 nm thickness was deposited onto polycrystalline silicon oxides using chemical vapor deposition and the co-sputtering of a tungsten metal target. The bonding state of the carbon atoms and the macroscopic and microscopic crystal structure of the film were investigated by Raman spectroscopy, X-ray diffraction and transmission electron microscopy measurements. From the experimental results, we determined that this film essentially had an amorphous structure. The temperature dependence on resistivity was measured in the temperature range of 2–300 K. Resistive superconducting transition was observed at 3.8 K. The dc magnetizations were measured in the temperature range of 1.8–6.5 K. The diamagnetism resulting from a superconductive state was observed below 3.75 K, which is consistent with a resistive superconducting transition. It is thought that the finite sized clusters of the different superconductive transition temperatures cooperatively produce a macroscopic superconducting phenomenon.     

Neutronic and thermodynamic feasibility of UF6-NpF6 fueled transmutation reactor

Transmutation of neptunium, which is contained in radioactive wastes discharged from nuclear reactors, was investigated as a substitutional method for geologic disposal. We proposed a transmutation reactor fueled with a mixture of gaseous ²³³UF₆ and ²³⁷NpF₆. Neutronic and thermodynamic analysis of the reactor revealed the feasibility of the concept. The reactor has two principal advantages: (1) use of the fuel gas enables on-line reprocessing, (2) ²³⁷Np can be transmuted by a high neutron flux. Our calculation indicated that the transmutation rate of ²³⁷Np was 335 g/year/MW_th, which is much larger than the annual yield of ²³²Np in PWR (6.19 g/year/MW_th).     

Temperature Dependence of the Raman Spectrum in Lithium Oxide Single Crystal

Temperature dependence of the Raman spectrum of lithium oxide single crystal has been measured over a temperature range of 80 to 1073 K. The frequency shift and the line width of the Raman spectrum in lithium oxide were about 531 and 4.5 cm^-1 at 80 K, respectively. At 1073 K, the frequency shift and the line width attained the values of 464 and 112 cm^-1, respectively. The strong temperature dependence of the frequency shift and line width was compared with data from some crystals with a fluorite structure.     

An effect of microstructure on the interface resistance between a perovskite-type oxide electrode and yttria-stabilized zirconia

The electrode characteristics of perovskite-type oxides, La_0.6Sr_0.4CoO₃ and La_0.6Sr_0.4MnO₃, on ceria-based oxide and stabilized zirconia were analysed by the a.c. impedance method. The ionic conductivities of the electrolyte and electrode conductivities from the a.c. impedance analysis agreed with those obtained from the current interruption and d.c. four-probe methods. Two semicircles from the charge transfer and diffusion processes appeared as the electrode resistance. The relative contribution of these two processes to the overall electrode resistance strongly depended on the microstructure of the electrode. The electrode microstructure could be controlled by the dispersion medium used for the electrode slurry. The La_0.6Sr_0.4MnO₃ electrode coated with n-butyl acetate slurry exhibited the smallest electrode resistance.