Contribution of metal vapor mass at periphery part of pulsed arc to electromagnetic force in weld pool

The arc welding has been used in various welding methods because it is inexpensive and high in strength after welding. However, it is a problem that accidents such as collapse of the bridge occur because of the welding defects. The welding of low cost and high productivity is required without the welding defects. The pulsed TIG welding is inexpensive and capable of high‐quality welding. The electromagnetic force contributing to penetration changes because the transient response of arc temperature and iron vapor generated from anode occurs. However, the analysis of pulsed TIG welding with metal vapor has been elucidated only metal vapor concentration near anode with transient phenomenon and heat flux. Thus, the theoretical elucidation of penetration depth with control factor has not been researched. In this paper, the contribution of metal vapor mass at the periphery part of pulsed arc to the electromagnetic force in the weld pool is elucidated. As a result, the iron vapor mass at periphery part decreased with increasing the frequency. The iron vapor was stagnated at axial center within one cycle. The electromagnetic force to the penetration depth direction in weld pool increased at axial center. Therefore, the metal vapor mass at periphery part plays an important role for the electromagnetic force increment at axial center.     

Membrane separation of indigenous noroviruses from sewage sludge and treated wastewater.

In this study, feasibility of membrane separation for the removal of indigenous noroviruses (NVs) is evaluated. The indigenous NV gene was never detected from ultrafiltration (UF) permeates of sewage sludge and treated wastewater. Indigenous NV gene was also not detected from permeates of sewage sludge and treated wastewater by microfiltration (MF) with a pore size of 0.1 microm (MF0.1). Even though the pore size of MF (0.1 microm) was much larger than the diameter of virus particle (approximately 30-40nm), more than 4-log10 reduction value (LRV) at maximum was achieved by membrane separation with MF0.1. NV genes were often detected from permeates of sewage sludge and treated wastewater by MF with a pore size of 0.45 microm (MF0.45), although the maximum log10 reduction values were more than 3.59 for sewage sludge and more than 2.90 for treated wastewater. It is important to verify factors determining the removal efficiency of viruses with MF membranes.     

Sub-50-nm physical gate length CMOS technology and beyond usingsteep halo

Sub-50-nm CMOS devices are investigated using steep halo and shallow source/drain extensions. By using a high-ramp-rate spike annealing (HRR-SA) process and high-dose halo, 45-nm CMOS devices are fabricated with drive currents of 650 and 300 μA/μm for an off current of less than 10 nA/μm at 1.2 V with T_ox^inv =2.5 nm. For an off current less than 300 nA/μm, 33-nm pMOSFETs have a high drive current of 400 uA/μm. Short-channel effect and reverse short-channel effect are suppressed simultaneously by using the HRR-SA process to activate a source/drain extension (SDE) after forming a deep source/drain (S/D). This process sequence is defined as a reverse-order S/D (R-S/D) formation. By using this formation, 24-nm nMOSFETs are achieved with a high drive current of 800 μA/μm for an off current of less than 300 μA/μm at 1.2 V. This high drive current might be a result of a steep halo structure reducing the spreading resistance of source/drain extensions     

Facile optical resolution of amino acid esters via hydrolysis by an industrial enzyme in organic solvents

Racemic amino acid esters were optically resolved via hydrolysis in organic solvents by the catalysis of an industrial alkaline protease, “Alcalase”. The products which were composed mainly of L-amino acids were insoluble and easily separated by filtration. The activity of the enzyme and enantiomeric excess of the products were significantly dependent on the nature of solvent and the water content in the reaction media. Generally, high values of enantiomeric excess were obtained at low water contents. Many natural and unnatural amino acids were resolved by this method.     

Acute progressive polyneuropathy in a patient with Waldenstr?m macroglobulinemia

A case of Waldenstr?m's macroglobulinemia (WM) (IgM-kappa type) associated with acute-onset demyelinating peripheral neuropathy is reported. A 49-year-old woman was admitted to our hospital because of general fatigue and recurrent syncope attacks. She was treated with vincristine, cyclophosphamide, epirubicin and prednisolone. By 10th hospital day, her clinical condition improved and serum viscosity was reduced. However, on the 21st hospital day, she suffered from rapidly progressive writing and gait disturbance. Neurological examination showed muscular atrophy and weakness in the distal part of four extremities. Deep tendon reflexes were diminished. There was no sensory deficit. Cerebrospinal fluid was normal. Anti-myelin associated glycoprotein activity of her serum was negative. Both motor and sensory nerve conduction velocities were markedly decreased. Biopsy of sural nerve revealed marked demyelination and onion bulb formation. There was IgM deposition on myelin sheath. Minimal axonal changes excluded the possibility of vincristine neuropathy. Plasmapheresis improved her symptoms, but nerve conduction velocities remained unchanged. Polyneuropathy associated with WM is usually gradual onset and sensory dominant. In this case, associated neuropathy was acute onset, progressive and motor dominant. This type of neuropathy in patients with WM is very rare.     

Spontaneous hemorrhage of an adrenal cortical adenoma causing Cushing''s syndrome

A modified surgical splint for Le Fort I osteotomies with transverse expansion is presented. The splint is made of a transpalatal stainless steel bar with acrylic abutment against the palatal surface of the molar and bicuspid tooth. It is rigid and renders excellent retention. It causes minimal patient discomfort, and oral hygiene is hardly compromised.     

Strengthening of nickel -base superalloys for nuclear heat exchanger application

Strengthening mechanisms of nickel-base superalloys have been discussed with the background of the Japanese research and development activities in this field. As candidates for materials of intermediate heat exchangers which will be used for a future programme of nuclear steelmaking systems, two kinds of alloys have successfully been developed in Japan. The designs of these alloys have been reviewed from metallurgical aspects including their composition and creep properties. In addition to the conventional methods to strengthen these alloys, such as solid solution hardening or particle precipitation hardening, a grain-boundary precipitation strengthening due to tungsten-rich ₂ phase in the Ni-Cr-W system, would be expected as a further advanced method.     

Water structure and improved mechanical properties of phospholipid polymer hydrogel with phosphorylcholine centered intermolecular cross-linker

We investigated the water structure and the mechanical properties of 2-methacryloyloxyethyl phosphorylcholine (MPC) polymer hydrogels cross-linked with a novel hydrophilic 2-(methacryloyloxy)ethyl-[N-(2-methacryloyloxy)ethyl]phosphorylcholine (MMPC) for soft contact lenses (SCL) applications and commercial methacrylic cross-linkers were in addition used for comparison with MMPC. Water structure in hydrogels, which influences the protein adsorption by dehydration was determined by differential scanning calorimetry. MMPC increased the freezing water content of the MPC polymer hydrogel compared with hydrophilic N,N′-methylenebisacrylamide (BIS) at the same water content. MMPC also improved fracture strength of the MPC polymer hydrogel to 120 kPa in tensile, which was considerably higher than that hydrogel cross-linked with BIS. It is suggested that MMPC shows higher cross-linking reactivity with MPC than BIS. We concluded that the MMPC increase both the free water content and the tensile properties. The MPC polymer hydrogel cross-linked with MMPC can be a useful SCL biomaterial.     

Development of an anisotropic conductive adhesive film (ACAF) from epoxy resins

A thermoset type anisotropic conductive adhesive film (ACAF), which electrically connects an ITO glass and a flex circuit both having conducting pattersn of less than 100 μm in pitch, has been developed. In this development, bisphenol A and bisphenol F epoxy resins were tested to formulate an ACAF with easy-to-handle tackiness, flexibility, and strenght. A curing agent that gives fast cure and long shelf-life properties to the epoxy resin was also selected. The tensile stress–strain responses of obtained adhesive films were successfully used for determining the formulation. Good aftercure physical properties (electrical and mechanical) were obtained. Durability against high temperature and high humidity were also tested to confirm long-term stability of the conduction of this ACAF. © 1995 John Wiley & Sons, Inc.     

Ethanol production from raw starch by a recombinant yeast having saccharification and fermentation activities

In order to develop a method for converting raw starch into ethanol efficiently, direct fermentation of ozonized raw starch using a recombinant yeast was investigated. Ozonolysis was carried out as a pretreatment to convert raw starch into ethanol rapidly and efficiently, and then the effect of the ozone degradation conditions on the degree of polymerization and the amount of amylose in a raw starch was determined. Since the degree of polymerization was low and the amount of amylose was high, raw starch treated with an ozone concentration of 40 gm^?3 and an ozonation time of 30 min was the material chosen for alcohol fermentation. Though the recombinant yeast could not convert the untreated raw starch, it converted the soluble starch and the ozonized raw starch at a comparatively high yield into ethanol. About 56% of the ozonized raw starch decomposed, and the ethanol concentration obtained from the ozonized raw starch was markedly greater than that obtained from untreated raw starch. The dynamic behavior of cell growth, substrate degradation, and ethanol production was examined in a continuous culture under various dilution rates, and the optimal dilution rate, ie 0.15 h^?1, was determined for maximizing the ethanol productivity (amount of ethanol produced per unit time). © 2002 Society of Chemical Industry