Zooplankton population in the river tigris: Effects of samarra impoundment

The influences of the Samarra impoundment on the ecology of the downstream sector of the river Tigris are investigated. Zooplankton were collected monthly from July 1987 to July 1988. It was found that zooplankton were most abundant during high river discharges in March. During the month of low river discharge, September, the zooplankton population was greatly reduced immediately below the barrage and remained so to the last downstream station. Several factors seem to explain such differences. The high discharge from the impoundment was found to be the dominating factor and may flush the small backwaters in which zooplankton were abundant, thus increasing the population in the river. Zooplankton species vary in their ability to sustain populations in the river, variations which are due mainly to species-specific characteristics.     

Manufacturing and replication of glass pyramidal micro-structures by using the injection moulding process

The aim of this work is to perform experimental investigations related to the different injection moulding conditions required for the proper replication of glass structures. The paper investigates the thermal and rheological characterisations of the feedstock. This study demonstrates that the structured shapes could be successfully injected in the structured metallic mould with pyramidal shapes, with suitable forming parameters. After sintering, the experiment results confirm that the components exhibit anisotropic shrinkage in range from 10 to 20?%.     

Algal ecology and composition in the Garmat ali river,Iraq

Planktonic, epipelic and epiphytic algae were studied monthly, during the period from January to December 1985 in the Garmat ali river, a naturally regulated river draining to the al-Hammar marsh, Iraq. Chlorophyll-a, primary productivity and water quality variables were also measured. High light penetration was noticed during the winter and spring. The water is oligohaline, alkaline and very hard. Reactive nitrate was found in higher concentrations than nitrite, and there were low concentrations of reactive phosphate. Two peaks were noticed for chlorophyll-a concentrations during spring and autumn, whereas only one occurred during autumn for primary productivity. The study area may be characterized as typically mesotrophic. A total of 154 species of algae was identified, including 65, 89, 98 and 77 species of plankton, epipelic and epiphytic algae on Potamogeton lucens and on Ceratophyllum demersum, respectively. Only 25 species were common to all the different communities. Diatoms were the dominant group in the epipelic and epiphytic algae during the study period, as well as in the plankton during spring and autumn. Seasonal variations were clear in the total cell numbers of algae from different habitats.     

The manufacturing and replication of microfluidic mould inserts by the hot embossing process

In this paper, the manufacturing of metallic microfluidic mould inserts is studied based on the hot embossing process. The feedstocks are prepared and analysed. The quality of the feedstock resulting from the mixing process is found to depend on numerous parameters, such as the mixing time, the mixing temperature, the shear rate and the powder loading. The present mixing study is conducted with copper powders. The thermal and rheological properties of the selected feedstock under various mixing conditions are determined and used to establish the necessary conditions for mixing, hot embossing and debinding to obtain the copper microfluidic mould inserts. Sintering at different temperatures is conducted under vacuum. The effects of the sintering temperatures are evaluated based on the sintered microstructures. In this work, the dimensional variations in the microfluidic samples, in particular the dimensional shrinkage, global warpage and surface roughness at each stage of the process, are quantified and compared in detail.     

Higher intake of DK265 corn silage by dairy cattle

In this experiment, intake of DK265 3-way corn hybrid by dairy cattle was compared specifically with intake 1) of its bm3 isogenic form, 2) of its 2 related single-way hybrids, and 3) of 2 controls that were registered hybrids of similar earliness. Both dry matter (DM) and lignin contents were similar in all hybrids except for the bm3 hybrid, which was less lignified. There was a tendency for lower starch content and, correlatively, higher neutral detergent fiber content in DK265 and in the 2 related single-way hybrids. Significant intake differences were observed between hybrids; the highest intake was recorded for the bm3 hybrid. Among normal hybrids, DK265 and one of its related single-way hybrids registered significantly higher intakes than other hybrids. Among normal hybrids, cell wall digestibility and/or lignin content did not explain all of the variations observed for intake, whereas the higher intake of DK265 bm3 could be related to its lower lignin content as compared with isogenic DK265. It was hypothesized that the higher intake observed for the DK265 hybrid was probably related to specific friability traits that are not relevantly measured through the usual tests used in corn breeding.     

Miniaturized and automated sample pretreatment for determination of PCBs in environmental aqueous samples using an on-line microporous membrane liquid-liquid extraction-gas chromatography system

A new, fast, and automated sample pretreatment technique for determination of lipophilic organic compounds in aqueous samples has been developed and applied to the determination of polychlorinated biphenyls (PCBs) in environmental river water. It is based on miniaturized microporous membrane liquid-liquid extraction coupled on-line to gas chromatography (GC) with electron capture detection. The heart of the system that simultaneously connects the sample pretreatment step to the final GC analysis has been named the extracting syringe (ESy). The ESy carries a miniaturized membrane extraction card attached to an electrically and mechanically designed installment and is mounted directly over a GC injector for fully automated injection of the extract. A method was developed to extract 10 PCB congeners from 1-mL water samples (after addition of 40% acetonitrile) with an extraction time of 10 min. The optimized methodology showed good linearity (in the dynamic concentration range of 5 ng L(-)(1)-1 microg L(-)(1)), enrichment factors of 33-40 times, repeatable extractions (RSD 2-5%, n = 4), and low detection limits (2-3 ng L(-)(1)). Acetonitrile had to be added to the samples in order to overcome the influence of PCB adsorption on the repeatability of extraction and enrichment and to minimize the overall memory effect (OME). OME and carryover depended not only on the concentration of the organic solvent added to the sample and that used in the washing procedure but also on whether the extracting card was changed or not. When an optimized washing procedure was applied, the OME was approximately 0.2% at high concentrations (i.e., 1 microg L(-)(1)). When each extraction took place in a new extraction card, no OME was detected. Additionally, no significant adsorption onto glass surfaces or a matrix effect on extraction was noticed. The main features of this methodology are good extraction repeatability, low detection limits at short extraction time, and the unsurpassed characteristic of no detectable OME in the entire system when each sample is processed in a new card. The total consumption of organic (nonchlorinated) solvents is less than 5 mL per sample.     

Investigation of a metal-ionic conductor interface in thin film samples using X-ray photoelectron spectroscopy and electrical measurements

The surface of an evaporated thin film of the ionic conductor β-PbF₂ was analysed using X-ray photoelectron spectroscopy (XPS). The results were compared with those obtained from nuclear and secondary ion mass spectrometry measurements. An analysis of the Au-β-PbF₂ interface shows the presence of a thin layer of partly oxidized metallic lead. Part of this interfacial lead diffused across the gold film towards the external surface where it became bound to oxygen. An electrical analysis of the interface was performed by studying the capacitance as a function of the surface potential. The differences between experimental and calculated values are discussed in the light of the XPS measurements.     

Design strategies to simplify and miniaturize imaging systems

We present the range of optical architectures for imaging systems based on a single optical component, an aperture stop, and a detector. Thanks to the formalism of third-order Seidel aberrations, several strategies of simplification and miniaturization of optical systems are examined. Figures of merit are also introduced to assess the basic optical properties and performance capabilities of such systems; by this way, we show the necessary trade-off between simplicity, miniaturization, and optical performance.     

Ozonation of oil sands process-affected water accelerates microbial bioremediation

Ozonation can degrade toxic naphthenic acids (NAs) in oil sands process-affected water (OSPW), but even after extensive treatment a residual NA fraction remains. Here we hypothesized that mild ozonation would selectively oxidize the most biopersistent NA fraction, thereby accelerating subsequent NA biodegradation and toxicity removal by indigenous microbes. OSPW was ozonated to achieve approximately 50% and 75% NA degradation, and the major ozonation byproducts included oxidized NAs (i.e., hydroxy- or keto-NAs). However, oxidized NAs are already present in untreated OSPW and were shown to be formed during the microbial biodegradation of NAs. Ozonation alone did not affect OSPW toxicity, based on Microtox; however, there was a significant acceleration of toxicity removal in ozonated OSPW following inoculation with native microbes. Furthermore, all residual NAs biodegraded significantly faster in ozonated OSPW. The opposite trend was found for ozonated commercial NAs, which are known to contain no significant biopersistent fraction. Thus, we suggest that ozonation preferentially degraded the most biopersistent OSPW NA fraction, and that ozonation is complementary to the biodegradation capacity of microbial populations in OSPW. The toxicity of ozonated OSPW to higher organisms needs to be assessed, but there is promise that this technique could be applied to accelerate the bioremediation of large volumes of OSPW in Northern Alberta, Canada.