Molecular structure and granule morphology of native and heat‐moisture‐treated pinhão starch

Pinhão seed is an unconventional source of starch and the pines grow up in native forests of southern Latin America. In this study, pinhão starch was adjusted at 15, 20 and 25% moisture content and heated to 100, 110 and 120 °C for 1 h. A decrease in λ max (starch/iodine complex) was observed as a result of increase in temperature and moisture content of HMT. The ratio of crystalline to amorphous phase in pinhão starch was determined via Fourier transform infra red by taking 1045/1022 band ratio. A decrease in crystallinity occurred as a result of HMT. Polarised light microscopy indicated a loss of birefringence of starch granules under 120 °C at 25% moisture content. Granule size distribution was further confirmed via scanning electron microscopy which showed the HMT effects. These results increased the understanding on molecular and structural properties of HMT pinhão starch and broadened its food and nonfood industrial applications.     

Evaluation of the effect of processing on cocoa polyphenols: antiradical activity,anthocyanins and procyanidins profiling from raw beans to chocolate

The content and composition of anthocyanins and procyanidins in fermented cocoa beans (from different geographic origins: Ecuador, Cameroon, Ivory Coast, Ghana and Nigeria), roasted nibs, cocoa mass and chocolate were determined, beside the determination of the total antiradical capacity. Concerning geographic origin, cocoa beans and processed products from Ecuador showed the highest levels of anthocyanins, followed by Nigeria and Cameroon. Generally, as cocoa beans were further processed, the levels of anthocyanins and flavan‐3‐ols decreased. The largest observed losses of phenolics occurred during roasting. A progressive decreasing trend in polyphenol concentration was observed in the other processed samples as well. Despite the original content of polyphenols in raw cocoa beans, technological processes imply a significant impact on cocoa quality, confirming the need of specific optimisation to obtain high value chocolate.     

Two-Dimensional Physical and Numerical Modeling of a Pile-Supported Earth Platform over Soft Soil

This paper focuses on the mechanisms occurring in a granular earth platform over soft ground improved by rigid piles. Two-dimensional physical model experiments were performed using the Schneebeli’s analogical soil to investigate the load transfer mechanisms by arching and the settlement reduction and homogenization. Experimental outputs are compared to results obtained on a numerical model using a plane strain continuum approach. The impact of the constitutive model complexity to simulate the platform material behavior was first assessed, but no large difference was recorded. As far as the proposed model, which takes the main features of the observed behavior satisfactorily into account, the numerical procedure could be validated and the parametric studies extended numerically. Both approaches of this study underlined the main geometrical and geotechnical parameters which should inevitably be taken into account in a simplified design method, namely the capping ratio, the platform height, and the platform material shear strength.     

Recent Development of Cognitive and Neuropsychological Assessment in Asian Countries.

There is a growing trend of research in neuropsychological assessment in Asia: The mean number of published studies increased from 1.8 in the 1980s to 16.0 in 2 recent years. About 40% of the studies reviewed concerned test development or adaptation, with the latter greatly outnumbering the former. To facilitate the test selection for clinical use, 36 clinical measures were evaluated based on some statistical criteria. The results showed that only 8 neuropsychological tests (5 Chinese. 2 Korean, and 1 Japanese) met the criteria. Given that Asian and Western populations differ on certain cognitive processes, future development of neuropsychological assessment measures in Asia should move from the adaptation of Western tests toward the construction of original tests with better ecological validity. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

XPS studies of directly fluorinated HDPE: problems and solutions

X-ray photoelectron spectroscopy (XPS) applied to the study of fluorinated polymer surfaces presents several problems related both to peak assignment and to degradation. In this work, we analyse extensively the question of XPS peak assignments in this kind of surfaces. We conclude that in this kind of surfaces using binding energy differences between fluorine and carbon is better than using absolute binding energies. Also a useful relation between fluorine photoelectron energy vs. polymer composition expressed through the atomic ratio fluorine/carbon (F/C) was found. A protocol for data treatment is proposed and applied to a XPS study of the degradation induced by X-ray on high-density polyethylene surfaces modified by direct fluorination. Results obtained for the degradation, namely the atomic ratio F/C obtained by two different methods, combined with angle resolved X-ray photoelectron spectroscopy (ARXPS) were used to study the fluorine concentration profile in depth, producing self-consistent results.     

Residual Stress Evolution in Repair Welds

Abstract: The aim of this paper is to study the influence of the repair procedure on the evolution of residual stress distribution in butt welds. C-Mn steel coupon plates of 11 mm thickness were prepared, subjected to stress relief heat treatment and welded with two beads, using the gas metal arc welding process. After the deposition of two weld beads, two successive repair welds were made on the middle length of the second bead. Longitudinal and transverse residual stresses were measured in the vicinity of the weld, after deposition of the two weld beads and after each repair weld. Residual stress evaluation was conducted using an X-ray diffraction method. The repair welds caused a decrease in magnitude of the initial longitudinal residual welding stresses, and an increase of the transverse residual stress magnitude, in tension at points within the repair length, and in compression at points outside the repair length.     

The Effect of Reagents on Ultrafine Iron Ore Vacuum Filtration

Continuous vacuum filters normally carry out the final removal of water from iron ore products. The objective of this investigation is to check the possibility of enhancing the industrial performance of a horizontal belt filter by adding one flocculant and two surfactants to the filtration feed slurry. The mineral sample came from the Iron Quadrangle (State of Minas Gerais, Brazil). X-ray diffraction showed a predominance of hematite and small amounts of quartz and goethite. The filtration tests were performed at laboratory scale using a modified Büchner funnel apparatus, which was connected to a scale/computer system. The results indicated: a) the best filtration condition was achieved near the zero charge condition; b) cake moisture, cake porosity, cake formation time and the specific cake resistance were pronouncedly influenced by the flocculant addition; and c) surfactants tested were not able to significantly reduce the cake moisture.     

Effects of load modeling in security constrained OPF studies

Results of computational experiments carried out on an adaptation of the AEP/IEEE 30 bus test system are reported. Some selected buses were modeled using an exponential type of load model. Three cases are considered. In the first case it is assumed that the specified load at modeled buses is obtained with unity voltage. In the second case it is assumed that the transformer taps have been adjusted to give all industrial-type consumers one per unit at the low-voltage panel when the high-side voltage corresponds to the standard optimal power flow (OPF) solution. The third case differs from the second in that the specified power demand is assumed to take place when the high-side voltages correspond to the intact case of the standard security constrained OPF solution. It is concluded that a decrease in fuel cost can be obtained in some instances when load models are incorporated in security constrained OPF studies during contingencies only. In situations where a decrease in fuel cost is obtained in this manner, the magnitude of decrease depends on the total percentage of load fed by fixed tap transformers and the sensitivity of these loads to modeling     

Renewable energy systems: A societal and technological platform

Today, the analysis of renewable energy places the emphasis on the technological and economic attributes with social and environmental impact assessment providing for a rather static, narrow frame of analysis. The participation and response of social actors and other stakeholders is usually of a traditional type, with consultation documents and public meetings, collection of complaints and suggestion schemes. This often encourages parochialism and an over-concentration on relatively trivial issues. It is, therefore, imperative to establish a new participatory planning platform to incorporate the wider socio-economic aspects of renewable energy systems and to provide for an operational analytical decomposition of them. In this work the issue of decomposition analysis is clarified, and a new agenda for the societal and technological decomposition analysis of renewable energy systems is developed. A case study is disclosed to present the relevance of the established platform for integrated (renewable) energy systems planning. Innovative aspects comprise of the simultaneous inclusion of decision analysis and social acceptance methods and tools in concert with the related public participation techniques.     

Performance analysis of concurrency control using locking withdeferred blocking

The concurrency control (CC) method employed can be critical to the performance of transaction processing systems. Conventional locking suffers from the blocking phenomenon, where waiting transactions continue to hold locks and block other transactions from progressing. In a high data contention environment, as an increasing number of transactions wait, a larger number of lock requests get blocked and fewer lock requests can get through. The proposed scheme reduces the blocking probability by deferring the blocking behavior of transactions to the later stages of their execution. By properly balancing the blocking and abort effects, the proposed scheme can lead to better performance than either the conventional locking or the optimistic concurrency control (OCC) schemes at all data and resource contention levels. We consider both static and dynamic approaches to determine when to switch from the nonblocking phase to the blocking phase. An analytical model is developed to estimate the performance of this scheme and determine the optimal operating or switching point. The accuracy of the analytic model is validated through a detailed simulation