Effect of apple cider vinegar agent on the microstructure,phase evolution,and magnetic properties of CoFe2O4 magnetic nanoparticles

In the present study, spinel structure CoFe₂O₄ nanoparticles were successfully synthesized by the sol-gel auto-combustion technique. The effect of apple cider vinegar (ACV) addition as an organic biocompatible agent on the size, morphology, and magnetic properties of CoFe₂O₄ nanoparticles was investigated in detail. The phase evolution, particle size, and lattice parameter changes of the synthesized phase have been estimated by using Rietveld structure refinement analysis of X-ray powder diffraction data. Also, Fourier transform infrared spectra (FT-IR) of the samples verified the presence of two expected bands correspond to tetrahedral and octahedral metal-oxygen complexes within the spinel structure. Furthermore, microstructural observations revealed that ultrafine particles have a semi-spherical morphology. It was shown that the particles size decreased from ~45 to ~17 nm with an increase in the amount of ACV. Magnetic properties were carried out by vibrating sample magnetometer (VSM) at room temperature. Both the saturation magnetization (M_s) and coercivity (H_c) were found to be significantly dependent on the crystallite size and the amount of ACV.     

Impact of crosstalk in an arrayed-waveguide multiplexer onN×N optical interconnection

The impact of crosstalk in an arrayed-waveguide N×N wavelength multiplexer is investigated precisely in relation to its application to wavelength-routing N×N all optical networks. In such systems multiple crosstalk light which has the same wavelength as the signal results in signal-crosstalk beat noise. We confirm that the noise is Gaussian and obtain the relation between crosstalk and power penalty. It is shown that the crosstalk must be less than -38 dB for a 16×16 system to keep the power penalty below 1 dB at a bit error rate of 10^-9     

Selective hydrogenation of oleic acid to 9-octadecen-1-ol: Catalyst preparation and optimum reaction conditions

A new catalyst, ruthenium-tin-alumina is found to selectively hydrogenate oleic acid to 9-octadecen-1-ol (oleyl + elaidyl alcohol) at low pressure with high yield. Catalyst preparation methods, catalyst raw materials and activation conditions have a significant effect on the activity of the catalyst. The optimum atomic ratio of ruthenium to tin is about 1:2. Catalyst prepared by an improved sol-gel method shows higher activity and selectivity than catalysts prepared by impregnation and coprecipitation methods. Chloride is found to have a negative effect on catalytic activity. The best catalyst is prepared from chloride-free ruthenium and tin raw materials. Under the optimum reaction conditions of 250°C and 5.6 MPa, the selectivities for 9-octadecen-1-ol and total alcohol (9-octadecen-1-ol + stearyl alcohol) formation are 80.9% and 97%, respectively, at a conversion of 81.3%.     

Oligosaccharide structures formed during the hydrolysis of lactose by Aspergillus oryzae β-galactosidase

Di-, tri-, tetra-, penta- and hexasaccharides were formed during the hydrolysis of lactose by transgalactosylation reaction of Aspergillus oryzae β-galactosidase. In this study the isolation and characterization of the major constituents of tri-, tetra- and pentasaccharides are described. The structure elucidation of 3 tri-, 2 tetra- and 1 pentasaccharides was carried out by methylation analysis, mass spectrometry and ¹³C-nmr spectrometry. The trisaccharides are $\text{O-β-}\text{d}\text{-}\text{galactopyranosyl}\text{-(1 → 3)-O-β-}\text{d}\text{-}\text{galactopyranosyl}\text{-(1 → 4)-}\text{d}\text{-}\text{glucose}\text{(3′-}\text{galactosyl-lactose}\text{)}$, $\text{O-β-}\text{d}\text{-}\text{galactopyranosyl}\text{-(1 → 6)-β-}\text{d}\text{-}\text{galactopyranosyl}\text{-(1 → 4)-}\text{d}\text{-}\text{glucose}\text{(6′-}\text{galactosyl-lactose}\text{)}$ and $\text{O-β-}\text{d}\text{-}\text{galactopyranosyl}\text{-(1 → 4)-O-[β-}\text{d}\text{-}\text{galactopyranosyl}\text{-(1 → 6)]-}\text{d}\text{-}\text{glucose}\text{(4,6-}\text{digalactosyl-glucose}\text{)}$. Tetrasaccharides are $\text{O-β-}\text{d}\text{-}\text{galactopyranosyl}\text{-(1 → 6)-O-β-}\text{d}\text{-}\text{galactopyranosyl}\text{-(1 → 6)-O-β-}\text{d}\text{-}\text{galactopyranosyl}\text{-(1 → 4)-}\text{d}\text{-}\text{glucose}$ and $\text{O-β-}\text{d}\text{-}\text{galactopyranosyl}\text{-(1 → 6)-O-β-}\text{d}\text{-}\text{galactopyranosyl}\text{-(1 → 3)}$ [or $\text{O-β-}\text{d}\text{-}\text{galactopyranosyl}\text{-(1 → 3)-O-β-}\text{d}\text{-}\text{galactopyranosyl}\text{-(1 → 6)]-O-β-}\text{d}\text{-}\text{galactopyranosyl}\text{-(1 → 4)-}\text{d}\text{-}\text{glucose}$. Pentasaccharide is $\text{O-β-}\text{d}\text{-}\text{galactopyranosyl}\text{-(1 → 6)-O-β-}\text{d}\text{-}\text{galactopyranosyl}\text{-(1 → 6)-O-β-}\text{d}\text{-}\text{galactopyranosyl}\text{-(1 → 6)-O-β-}\text{d}\text{-}\text{galactopyranosyl}\text{-(1 → 4)-}\text{d}\text{-}\text{glucose}$.     

Type II robotic assembly line balancing problem: An evolution strategies algorithm for a multi-objective model

In this paper a different type II robotic assembly line balancing problem (RALB-II) is considered. One of the two main differences with the existing literature is objective function which is a multi-objective one. The aim is to minimize the cycle time, robot setup costs and robot costs. The second difference is on the procedure proposed to solve the problem. In addition, a new mixed-integer linear programming model is developed. Since the problem is NP-hard, three versions of multi-objective evolution strategies (MOES) are employed. Numerical results show that the proposed hybrid MOES is more efficient.     

Use of FIB to Study ZDDP Tribofilms

Focussed ion beam milling (FIB) followed by TEM has been used to study ZDDP tribofilms on rubbed steel surfaces. It has been found that the impact of high energy platinum and gallium ions during FIB causes significant morphological and structural changes to the uppermost 30–50 nm of a ZDDP tribofilm. This can be prevented by the low energy deposition of a quite thick gold layer prior to installation of the sample in the FIB facility. This problem, and its solution, have been quite widely reported in the non-tribology literature but have not previously been highlighted in the application of FIB to study tribological surfaces. It has also been found, using this gold pre-deposition method, that the bulk of the ZDDP tribofilm studied has a polycrystalline structure.     

A more accurate one-dimensional analysis and design of irregular LDPC codes

We introduce a new one-dimensional (1-D) analysis of low-density parity-check (LDPC) codes on additive white Gaussian noise channels which is significantly more accurate than similar 1-D methods. Our method assumes a Gaussian distribution in message-passing decoding only for messages from variable nodes to check nodes. Compared to existing work, which makes a Gaussian assumption both for messages from check nodes and from variable nodes, our method offers a significantly more accurate estimate of convergence behavior and threshold of convergence. Similar to previous work, the problem of designing irregular LDPC codes reduces to a linear programming problem. However, our method allows irregular code design in a wider range of rates without any limit on the maximum variable-node degree. We use our method to design irregular LDPC codes with rates greater than 1/4 that perform within a few hundredths of a decibel from the Shannon limit. The designed codes perform almost as well as codes designed by density evolution.     

Morphological aspects of competitive grain growth during directional solidification of a nickel-base superalloy, CMSX4

Quenched directional solidification of specially oriented bi-crystals of the Ni-base superalloy CMSX4, was carried out in an attempt to understand the role of the dendritic morphology in the process of competitive grain growth. For the range of misorientations considered (primary 001 misoriented by up to 7° from the uniaxial thermal gradient), there was no evidence of overgrowth of the primary misoriented dendrite by the secondary arms on the leading aligned primary. In fact, it was observed that for this range of misorientations, the tip of the retarded primary suppresses the growth of secondaries on its leading neighbour. This subsequently simply restricts the growth of the mis-aligned crystal to its original boundary, rather than reducing its size and is suggested as a possible reason for the range of stable axial orientations encountered during directional solidification of CMSX4.     

Multielectrode DBR laser diode for wide bandwidth and flat FM response

A flat red-shifted FM response over a 1 GHz bandwidth has been achieved in a newly fabricated three-electrode DBR LD. Since the DBR structure makes it possible to tune the wavelength without distorting the FM characteristics, the LD is suitable for transmitters in optical FDM communications using FSK lightwaves.<>     

Changes of activity inducing chromosomal aberrations and transformations of chlorinated humic acid.

The change of the toxicity of chlorinated water after chlorine injection was examined. For the measurement of toxicity, chromosomal aberration test and transforming test were carried out as indexes to initiating activity and to promoting activity in the carcinogenesis process, respectively. Activity inducing chromosomal aberrations of chlorinated humic acid gradually decreased with time after chlorination. In contrast, activity inducing transformations measured by the two-stage assay gradually increased. Thus, the toxicity that decreases or increases is present in chlorinated water. Furthermore, activity inducing transformations measured by the non-two-stage assay gradually decreased. This direction of change was reverse to that of activity inducing transformations by the two-stage assay and consistent with that of activity inducing chromosomal aberrations. It is speculated that the main reason of decreasing activity inducing transformations by the non-two-stage assay is because initiating activity detected as activity inducing chromosomal aberrations in chlorinated water decreases drastically. Directions of changes of total organic halogen and carbonyl group were qualitatively consistent with that of activity inducing chromosomal aberrations. Directions of changes of chloroform and dichloroacetic acid were qualitatively consistent with that of activity inducing transformations by the two-stage assay. Findings of this study suggest that further research is necessary to compare carcinogenicity of tap water near water purification plant and distant tap water.