N-Alkylation of chitin and some characteristics of the novel derivatives

Summary Introduction of simple alkyl groups at the C-2 nitrogen of chitin and some properties of the resulting N-alkyl-chitins have been examined. Chitosan was fully deacetylated and treated with three kinds of aldehydes, formaldehyde, acetaldehyde, and pentanal. The Schiff bases of chitosan, whose extents of substitution were dependent on the amount of aldehydes, were reduced with sodium cyanoborohydride to N-alkylated chitosans. The N-alkyl-chitosans were then transformed into the corresponding N-alkyl-chitins by acetylation with acetic anhydride followed by transesterification to remove partly formed O-acetyl groups. The resulting N-methyl-, ethyl-, and pentyl-chitins were amorphous and showed improved affinity for organic solvents. Received: 13 December 2001/Revised version: 11 January 2002/Accepted: 17 January 2002     

Mechanochemical block copolymerization in heterogeneous systems of the solid poly(vinyl chloride) with styrene by ultrasonic irradiation

Summary Mechanochemical block copolymerization in heterogeneous systems of the solid poly(vinyl chloride)-styrene-sodium dodecyl sulfate aqueous solutions has been studied by ultrasonic irradiation at 65 °C. The block copolymerization of styrene was initiated by free radicals produced from the poly(vinyl chloride) particles by ultrasonic waves. The initial rate of the block copolymerization Rp was given by Rp α [Styrene] [Sodium dodecyl sulfate]^1/2. Both copolymer and homopolymer were obtained. For example, when 2.506 g of the poly(vinyl chloride) particles, 24.23 g of styrene, and 54.00 g of sodium dodecyl sulfate aqueous solution (0.500 wt%) were added in the reaction system, the weight proportions of the block copolymer and polystyrene after 60 min were approximately 50 and 20%.     

Preferred orientation on beta-alumina ceramics

A β-alumina tube was formed by hydrostatic pressing of raw powder, lathing and subsequent firing. Preferred orientation of tabular crystallites of β-alumina was determined by X-ray diffraction and polarizing microscope technique. The basal planes of the crystallites had a tendency to be perpendicular to the radial direction of the tube. Ionic conductivity in the axial direction was higher by a factor of 1.5 than that in the radial direction. This was consistent with the result on preferred orientation of the crystallites.     

The nuclear actin-related protein Act3p/Arp4p is involved in the dynamics of chromatin-modulating complexes

Chromatin remodelling and histone-modifying complexes govern the modulation of chromatin structure. While components of these complexes are diverse, nuclear actin-related proteins (Arps) have been repeatedly found in these complexes from yeast to mammals. In most cases, Arps are required for functioning of the complexes, but the molecular mechanisms of nuclear Arps have as yet been largely unknown. The Arps and actin, sharing a common ancestor, are supposed to be highly similar in the three-dimensional structure of their core regions, including the ATP-binding pocket. The Arp Act3p/Arp4p of Saccharomyces cerevisiae exists within the nucleus, partly as a component of several high molecular mass complexes, including the NuA4 histone acetyltransferase (HAT) complex, and partly as uncomplexed molecules. We observed that mutations in the putative ATP-binding pocket of Act3p/Arp4p increased its concentration in the high molecular mass complexes and, conversely, that an excess of ATP or ATPgammaS led to the release of wild-type Act3p/Arp4p from the complexes. These results suggest a requirement of ATP binding by Act3p/Arp4p for its dissociation from the complexes. In accordance, a mutation in the putative ATP binding site of Act3p/Arp4p inhibited the conversion of the NuA4 complex into the smaller piccoloNuA4, which does not contain Act3p/Arp4p and exhibits HAT activity distinct from that of NuA4. Although the in vitro binding activity of ATP by recombinant Act3p/Arp4p was found to be rather weak, our observations, taken together, suggest that the ATP-binding pocket of Act3p/Arp4p is involved in the function of chromatin modulating complexes by regulating their dynamics.     

Development of an Artificial Lipid-Based Membrane Sensor with High Selectivity and Sensitivity to the Bitterness of Drugs and with High Correlation with Sensory Score

This paper reports the development of membrane sensors based on an artificial lipid and plasticizers with high selectivity and sensitivity to drug bitterness by using bis(1-butylpentyl) adipate (BBPA), bis(2-ethylhexyl) sebacate (BEHS), phosphoric acid tris(2-ethylhexyl) ester (PTEH), and tributyl o-acetylcitrate (TBAC) as a plasticizer and phosphoric acid di-n-decyl ester (PADE) as an artificial lipid to optimize surface hydrophobicity of the sensors. In addition, a sensor with highly correlated bitterness sensory score was developed by blending BBPA and TBAC to detect the bitterness suppression effect of sucrose, and other bitter-masking materials. Therefore, this sensor can be used to evaluate the bitterness of various drug formulations with high accuracy. Copyright © 2009 Institute of Electrical Engineers of Japan. Published by John Wiley & Sons, Inc.     

Efficiency analysis of telescopic-legged bipedal robots

This paper investigates the stability of underactuated bipedal walking incorporating telescopic-leg actuation. In human walking, knee joints of swing and support legs are bent and stretched. The telescopic legs mimic the motion of the center of mass of human legs via their telescopic motion during the stance phase. First, underactuated telescopic-legged biped robot models are introduced. Second, an output-following control law is applied to the linearized equation of motion of the robot, and the controlled robot’s equation is then specified as a linear time-varying system. The error transition equation is developed to evaluate the stability during the stance phase. Numerical calculations are performed to show the influences of leg telescopic motion on the stability.     

Importance of van der Waals contact between Glu 35 and Trp 109 to the catalytic action of human lysozyme

OBJECTIVE: The goal of our study was to evaluate the use of duplex Doppler sonography for revealing hepatic artery stenosis (HAS) in patients who have undergone liver transplantation. MATERIALS AND METHODS: Forty-six patients with spectral Doppler waveforms obtained from the hepatic artery and with subsequent arteriography were reviewed retrospectively. Arterial waveforms, resistive indexes (RIs), and systolic acceleration times (SATs) were evaluated by one reviewer who was unaware of the arteriographic findings. The mean interval between the two examinations was 2.8 days. Arteriograms that revealed a stenosis of greater than 50% were classified as abnormal. RESULTS: Of the 46 patients, 21 (46%) had a significant stenosis. Patients who had HAS had significantly (p < .05) prolonged SATs (0.08 +/- 0.03 sec versus 0.06 +/- 0.02 sec) and reduced RIs (0.49 +/- 0.05 versus 0.66 +/- 0.05) compared with patients who did not have HAS. Optimal thresholds for HAS detection were RIs less than 0.55 and SATs greater than 0.08 sec. HAS was found in 14 of 15 patients who had both abnormal RIs and SATs. Of the remaining 31 patients, 12 had abnormal values for RI or SAT. Of these 12 patients, three had HAS. Thus, 19 patients had normal RIs and SATs; however, four of these patients were found to have an arterial stenosis. In our 46 patients, abnormal values for both RI and SAT were 67% sensitive and 96% specific for stenosis. When at least one abnormal value was found on Doppler imaging, sensitivity and specificity for stenosis were 81% and 60%, respectively. CONCLUSION: Duplex Doppler imaging can noninvasively reveal HAS. Abnormal values for both RI and SAT proved to be a more accurate predictor of stenosis than either RI or SAT as independent parameters.     

Application of the environmental SEM in human dentin bleached with hydrogen peroxide in vitro.

The environmental SEM (E-SEM) can be used unfixed biological samples under a low vacuum and wet condition. In this study, the fractured dentin of unfixed human teeth was treated with a 30% hydrogen peroxide solution (H2O2) for the examination of tooth-bleaching prior to the E-SEM and a conventional SEM. The peritubular matrix (PM) always showed a few cracks along the long axis of a dentinal tubule, and the ends of fine fibrils rose to the smoothly changed surface of the intertubular matrix (IM). The E-SEM with non-fixation and the conventional SEM following fixation indicated that the hydrogen peroxide solution easily permeated the PM and dissolved the non-fibrillar substance including the cracks of the PM by the constriction. In the IM, the solution may partially dissolve the organic parts within mineralized fibrils as well as non-fibrillar substance between the fibrils, although these remnants might precipitate again there.     

A practical method for position-dependent Compton-scatter correction in single photon emission CT

A new method is proposed to subtract the count of scattered photons from that acquired with a photopeak window at each pixel in each planar image of single-photon emission computed tomography (SPECT). The subtraction is carried out using two sets of data: one set is acquired with a main window centered at photopeak energy and the other is acquired with two subwindows on both sides of the main window. The scattered photons included in the main window are estimated from the counts acquired with the subwindows and then they are subtracted from the count acquired with the main windows. Since the subtraction is performed at each pixel in each planar image, the proposed method has the potential to be more precise than conventional methods. For three different activity distributions in cylinder phantoms, simulation tests gave good agreement between the activity distributions reconstructed from unscattered photons and those from the corrected data.