The synthesis of amorphous M-Si (M=transition metal) alloy powders by mechanical alloying

Crystalline powders of Si and M (transition metal) in the composition ratio Si M = 2 1 were mechanically alloyed by a laboratory ball mill in an inert atmosphere. The progress of the mechanical alloying was identified by X-ray diffraction. The amorphization reaction between Si and M proceeded according to a second-order reaction. The sequence of the rate of amorphization reaction for the Si-M system was Mn > Ti > V > Ni > Co. The sequence of the rate was correlated to the volume ratio (V _M/V_Si) of the Si-M system except for Si-Ni system. The crystallization of Si-Mn, of which the MA rate was fastest, was studied by means of X-ray diffraction, differential thermal analysis (DTA) and electrical resistivity measurement. We observed parallel changes on crystallization between the thermal event in the DTA tracing and the change of electrical resistance.     

Curvature continuous path generation for autonomous vehicle using B-spline curves

In this paper we introduce a roadmap algorithm for generating collision-free paths in terms of cubic B-spline curves for unmanned vehicles used in mining operations. The algorithm automatically generates collision-free paths that are curvature continuous with an upper bounded curvature and a small slope discontinuity of curvature at knots, when we are given the locations of the obstacles, the boundary geometry of the working area, positions and directions of the vehicle at the start, loading, and the goal points. Our algorithm also allows us to find a switch back point where the vehicle reverses its direction to enter the loading area. Examples are provided to demonstrate the effectiveness of the proposed algorithms.     

Human behavior in a staircase during a total evacuation drill in a high‐rise building

Many studies have been conducted on the evacuation behavior on the staircases of buildings, but very little data are available for a situation with many occupants in a crowded high‐rise building. Therefore, this study investigated the evacuation behavior of a large number of evacuees on the staircase of a 25‐story high‐rise building. A total evacuation drill was conducted with 2088 evacuees, and the behavior of 1136 evacuees on the landings of the south staircase was recorded by a video recorder on the ceiling. The relationship between the density and speed of the evacuees on the landings was analyzed from the evacuation data for two situations: without and with merging in the stair flow. The evacuation stair flow in this drill had merging occupants entering from the floors, but no one entered from the lower floors during the latter period of the drill. Therefore, the flow during the latter period was treated as non‐merging flow, for which it was observed that, when the staircase was fully crowded, the density on the landings in the moving situation was different from that in the stopped situation. Moreover, the density on the landings was different from that on the treads. Furthermore, in the merging flow, a merging ratio of approximately 50:50 occurred during the congested evacuation. Copyright © 2016 John Wiley & Sons, Ltd.     

Experimental study of bubbly swirling flow in a vertical tube using ultrasonic velocity profiler (UVP) and wire mesh sensor (WMS)

Two-phase air-water bubbly swirling flow through a pipe is a complex turbulent flow and its prediction is still challenging. The present paper describes the experimental investigation of the air-water bubbly swirling flow in vertical co-current flow. Swirling flow is induced by a twisted tape in a 20 mm inner diameter pipe. The flow is investigated using Ultrasonic velocity profiler (UVP), which allows the measurement of liquid and gas velocities simultaneously. Furthermore, simultaneous measurement of void fraction is performed using Wire mesh sensor (WMS). The experimental results reveal that swirling flow has significant impact on bubbles’ distribution. In low liquid flow rate, the average bubble velocity is fairly uniform along the radial position and void fraction increases in the near wall region. However, increasing liquid flow rate at constant gas flow rate leads to increase in void fraction in the core region, this is mainly due to drift velocity which is affected by centrifugal force. Experimental findings and parametric trends based on the effects of swirling flow are summarized and discussed.     

Processing and 3D printing of SiCN polymer-derived ceramics

Preceramic polymer resins are attractive for the 3D printing of net-shaped ceramic components. Recently various processes have been demonstrated for 3D printing of polymer-derived ceramics (PDCs). Ultimately in these processes, the process outcomes strongly depend on the process parameters. In particular, for PDCs the ceramic density, and ceramic yield are affected by the catalyst concentration and cross-linking duration. Here, we use thermal analysis and FTIR to quantify the interrelation of the process parameters on the process outcome for polysilazanes and demonstrate 3D printing of PDC components based on the best-identified process parameters. The results of this work can be used as guidelines for future additive manufacturing of PDCs.     

Effect of TiO2 on morphology and mechanical properties of PVDF/PMMA blend films prepared by melt casting process

Effect of titanium dioxide (TiO₂) on morphology and mechanical properties of poly(vinylidene fluoride) (PVDF)/poly(methyl methacrylate) (PMMA) blend films prepared at different TiO₂ contents by a melt casting process was studied. The results showed that tensile moduli in both the machine direction (MD) and the transverse direction (TD) increased with increasing TiO₂ content, and calculated tensile moduli based on the Halpin–Tsai and the Kerner model were consistent with experimental ones in both the MD and TD of films containing 10 wt % TiO₂. However, experimental tensile moduli exhibited smaller values compared with calculated ones, as the TiO₂ content increased to 30 wt %_, and it was assumed that this is due to the decrease of crystallinity of PVDF. Morphological observations indicated that TiO₂ particles did not affect crystal structures of PVDF and the morphology of PVDF/PMMA amorphous phase, but hindered the crystallization of PVDF. The MD and TD elongation at break exhibited >200 and <20%, respectively. The SEM micrographs revealed that spherulites could deform along the MD when the tensile force was applied along the direction. By contrast, spherulites could not deform along the TD and fractured at very small elongation, owing to the anisotropic morphology of spherulites. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 40454.     

Size-dependent separation of graphene oxide by deformation of packed-gel in a chromatographic column

ABSTRACT

A deformable gel-packed chromatographic column was used to separate as-synthesized graphite oxide with different sizes. The synthesized gel (56 µm) was deformed by pressure of the fluid flow and the gaps in the gels showed a range of sizes. A suspension of graphene oxide (0.1 g/L, 10 mL) was injected, and graphene oxide in the elution had a size at 0.56 μm and 0.14 μm, whereas in half upper and bottom domain of the gel layer graphene oxide had a size at 33 µm and 2.9 µm, respectively, demonstrating that graphene oxide suspension was separated by size through gel layer.     

Quantification of anaerobic ammonium-oxidizing bacteria in enrichment cultures by real-time PCR

The anaerobic ammonium-oxidizing (ANAMMOX) bacteria were enriched from a rotating disk reactor (RDR) biofilm in semi-batch cultures. Based on fluorescence in situ hybridization (FISH) analysis, this enrichment led to a relative population size of 36% ANAMMOX bacteria. Phylogenetic analysis revealed that all the detected clones were related to the previously reported ANAMMOX bacteria, Candidatus Brocadia anammoxidans (AF375994), with 92% sequence similarity. Furthermore, we successfully developed a real-time polymerase chain reaction (PCR) assay to quantify populations of ANAMMOX bacteria in the enrichment cultures. For this real-time PCR assay, PCR primer sets targeting 16S ribosomal RNA genes of ANAMMOX bacteria were designed and used. The quantification range of this assay was 6 orders of magnitude, from 8.9x10(1) to 8.9x10(6) copies per PCR, corresponding to the detection limit of 3.6x10(3) target copies mL(-1). A significant correlation was found between the increase in copy numbers of 16S rRNA gene of ANAMMOX bacteria and the increase in nitrogen removal rates in the enrichment cultures. Quantifying ANAMMOX bacterial populations in the enrichment culture made it possible to estimate the doubling time of the enriched ANAMMOX bacteria to be 3.6 to 5.4 days. The real-time PCR assay gave comparable population sizes in the enrichment cultures with the FISH results. These results suggest that the real-time PCR assay developed in this study is useful and reliable for quantifying the populations of ANAMMOX bacteria in environmental and engineering samples.     

Investigation of radiation-induced surface activation effect in austenitic stainless steel under ultraviolet and γ-ray irradiations

The radiation-induced surface activation (RISA) effect will be applied to the core design in supercritical light water reactor (SCWR) in order to achieve a high performance with excellent economy and safety. The purpose of the present study is to investigate the RISA effect in the candidate fuel cladding materials in SCWR such as PNC1520. The change of weldability due to RISA effect and the related microstructure analysis were performed in oxidized PNC1520 and 304 stainless steel with various oxidization periods. The phases contained in the surface oxide layer of the present specimen were identified as Fe₂CrO₄, γ-Fe₂O₃, and Fe₂O₃. The lifetime of 13.8 days for wettability improving factor was confirmed in the ultraviolet (UV) irradiation. Meanwhile, the long life of 13.8 days and short life of 0.8 days for wettability improving factors were identified in the γ-ray irradiation. Based on the fact that the band gap energies of Fe₂CrO₄, γ-Fe₂O₃, and Fe₂O₃ were, respectively, 2.1, 2.0, and 2.2 eV, and the photo energies of UV and γ-ray irradiation were 4.48 eV and 13.3 MeV, it is therefore clarified that the hydrophilization on the oxide layer is ascribed to the RISA effect.     

Preparation of sharp-melting hard palm midfraction and its use as hard butter in chocolate

Preparation of hard palm midfractions (PMF) and its use as a cocoa butter equivalent ingredient were studied. Hard PMF is obtained by multistep fractionation of palm oil involving dry fractionation (DF) and/or solvent fractionation (SF), usually using hexane or acetone. From our experience, in acetone, a polar solvent, symmetrical 1,3-disaturated triacylglycerols tend to selectively crystallize more than nonsymmetrical 1,2- or 2,3-disaturated triacylglycerols, making it suitable for obtaining the solid midfraction. Unfortunately, triacylglycerols are very soluble in hexane, and temperatures at least 15 degrees lower than those required for acetone must be used for equivalent crystal yields. On the other hand, DF is a less expensive and safer process. Thus, multistep fractionation combining DF and SF using acetone was developed to achieve sufficient removal of high-melting components, and further enrichment of 1,3-dipalmitoyl-2-oleoylglycerol and the hard PMF was obtained by triple-step fractionation of palm olein or double-step fractionation of soft PMF. Compared to conventional hard PMF, this hard PMF had a steeper melting curve and better snapping and sharp-melting qualities when used in chocolate. Heat resistance of the hard PMF chocolate was similar to the conventional hard PMF chocolate, and its bloom resistance could be improved by adding polyglycerol fatty acid esters.