Biosorption of Phenol onto Posidonia oceanica (L.) Seagrass in Batch System: Equilibrium and Kinetic Modelling

In this research, the biosorption of phenol using the fibres of a Mediterranean seagrass Posidonia oceanica (L.) was studied. Batch experimental procedures were made to investigate the ability of this novel marine biomass to remove phenol from aqueous phase. The influences of pH and contact time at different initial concentrations were evaluated. The results showed that biosorption capacity was enhanced using solution pH equal to 5.2. The modelling results showed that pseudo‐second‐order and Redlich‐Peterson models were found to be the most suitable to satisfactory describe the kinetic and equilibrium adsorption data, respectively.     

A General Reliable Quadratic Form: An Extension of Affine Arithmetic

In this article, a new extension of affine arithmetic is introduced. This technique is based on a quadratic form named general quadratic form. We focus here on the computation of reliable bounds of a function over a hypercube by using this new tool. Some properties of first quadratic functions and then polynomial ones are reported. In order to show the efficiency of such a method, ten polynomial global optimization problems are presented and solved by using an interval branch-and-bound based algorithm. The work of the first author was also supported by the Laboratoire de Mathématiques Appliquées CNRS–FRE 2570, Université de Pau et des Pays de l'Adour, France, and by the Laboratoire d'Electrotechnique et d'Electronique Industrielle CNRS–UMR5828, Group EM³, INPT–ENSEEIHT.     

Preparation and Characterization of Magnetite–Chitosan Nanoparticles and Evaluation of Their Cytotoxicity Effects on MCF7 and Fibroblast Cells

Nowadays, magnetic nanoparticles play a key role in drug treatment. However, if they are uncoated, they might aggregate and cause embolism in drug delivery. To avoid this, they are generally coated with polymers. In this investigation, magnetic nanoparticles (MNPs) were coated with chitosan through in situ co-precipitation process and their properties in addition to their cytotoxicity in MCF7 and fibroblast cells were analyzed. The results showed MNPs–chitosan nanoparticles would contain an average mean diameter of 32 nm and a saturation magnetization (M _S) value of 38.87 emu/g. To characterize the synthesized nanoparticles in terms of structural, morphological and magnetic properties, Fourier transform infrared (FTIR), X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), thermal gravimetric analysis (TGA) and vibrating sample magnetometry (VSM) studies were used. Toxicity test was also done to investigate whether their presence would cause any toxicity in the body; in addition, antibacterial assay was done to analyze if nanoparticles could be used as an antimicrobial agent.     

Potential effects of ultrafiltration process and date powder on textural,sensory, bacterial viability,antioxidant properties and phenolic profile of dromedary Greek yogurt

The aim of this study was to improve textural and antioxidant capacity of dromedary yogurt using ultrafiltration process and date powder. Ultrafiltration increased total solids content of dromedary milk within the range considered optimal to develop yogurt. Texture profile of Greek yogurt fortified with date powder (GYD) improved considerably compared to control. Sample of GYD are more appealing to consumer than control. LC-ESI-MS analysis of GYD extracts allowed the identification of fifteen phenolic compounds, among which quinic acid and cirsiliol were found to be the major phenolic acid and flavonol, respectively. GYD exhibited the highest DPPH•-radical scavenging activity, Fe²⁺ chelating capacity and Fe³⁺ reducing power. The follow-up of physical and microbiological stability of GYD and control during cold storage showed that date powder significantly increased bacterial counts and decreased syneresis. Therefore, ultrafiltration and date powder could be valued as effective tool to solve the poor consistency of dromedary milk products.     

Optimization of printing parameters for improvement of mechanical and thermal performances of 3D printed poly(ether ether ketone) parts

Many processing parameters can be adjusted to optimize the fused filament fabrication (FFF) process, a popular and widely used additive manufacturing techniques for plastic materials. Among those easily adjusted parameters are the nozzle temperature, printing speed, raster orientation, and layer thicknesses. Using poly(ether ether ketone) (PEEK) as the base material, a design of experiments analysis was performed on the main FFF parameters. A response surface methodology was applied to analyze the results and to maximize the output responses. Results have shown that the nozzle temperature is the most influential parameter on tensile properties and the crystallinity degree of printed PEEK by FFF process. Parts produced with optimized FFF parameters were then subjected to an annealing treatment to induce a relaxation of residual stress and to enhance crystallinity. The best properties for 3D printed PEEK parts were achieved with annealed parts prepared at 400°C with a printing speed of 30 mm/s, 0.15 mm layer thickness and raster orientation of [0°/15°/−15°]. The resulting parts have mechanical properties comparable to those of injected PEEK.     

Combined microwave and enzymatic treatments for ��-lactoglobulin and bovine whey proteins and their effect on the IgE immunoreactivity

Effect of combined microwave (MW) and enzymatic hydrolysis on the human immunoglobulin E (IgE)-binding properties of ??-lactoglobulin (??-lg) and other whey proteins (WP) was investigated. Separated ??-lg and full whey protein isolate (WPI) were hydrolyzed with trypsin, chymotrypsin, mixture of trypsin/chymotrypsin, and pepsin at three microwave power levels: 50?W during 1 and 5?min, 100 and 200?W during 1 and 3?min. The immunoreactivity of the obtained hydrolysates resulting from combined microwave protease treatment was assessed using sera of young patients allergic to bovine whey proteins. The application of microwave treatment at 200?W enhances the hydrolysis of ??-lg by pepsin in 3?min and decreases significantly its immunoreactivity. The extensive hydrolysis of the microwave-treated ??-lg and WPI with trypsin, chymotrypsin, and the mixture of trypsin with chymotrypsin did not have an impact on the IgE binding of the products obtained in all the studied conditions.     

Production of active lipase by Rhizopus oryzae from sugarcane bagasse: solid state fermentation in a tray bioreactor

This study deals with production of lipase in solid state fermentation by Rhizopus oryzae from sugarcane bagasse. A tray bioreactor was designed for the extracellular enzyme production. Daily, lipase production was evaluated at several incubation temperatures. Furthermore, the influence of temperature and humidity of the cabinet, depth of solid bed, particle size, initial moisture content and supplementary substrate (olive oil) as carbon source was investigated. The obtained results showed that bioreactor temperature of 45 °C, humidity of 80%, solid bed depth of 0.5 cm, particle size in the range of 0.335–1 mm, substrate initial moisture content of 80% for the top tray and 70% for the middle tray and supplementary substrate of 8% (v/w) olive oil led to maximum lipase production. Under optimum fermentation conditions after 72‐h incubation, maximum lipase activities for the top, middle and bottom trays were 215.16, 199.36 and 52.64 U gds^?1, respectively.     

Effect of some tripodal bipyrazolic compounds on C38 steel corrosion in hydrochloric acid solution

The corrosion inhibition of C38 steel in molar HCl by N,N-bis[2-(3,5-dimethyl-1H-pyrazol-1-yl)ethyl]buthylamine (P1) and 5-{N,N-bis[2-(3,5-dimethyl-1H-pyrazol-1-yl)ethyl] amino} pentanol (P2) has been investigated at 308 K using electrochemical and weight loss measurements. Measurements show that these compounds act as good inhibitors without changing the mechanism of the corrosion process. Moreover, the inhibiting efficiency increases with the increase in concentration of the studied inhibitors. Compound P2 showed better protection properties even at relatively higher temperatures when compared to P1. The associated activation corrosion and free adsorption energies have been determined. P1 and P2 are adsorbed on the C38 steel surface according to a Langmuir isotherm adsorption model.