Formulation and characterisation of nanosuspension of herbal extracts for enhanced antiradical potential

Nanotechnology is a promising technique to increase the bioavailability of herbal medicines. This paper presents the nanosuspension approach for increasing the aqueous solubility and thereby bioactivity of important herbal extracts. Nanosuspensions of the seeds of three plants extract (Silybum marianum, Elettaria cardamomum and Coriandrum sativum) were prepared by using polyvinyl alcohol (1.5% w/v) as a stabiliser. Prepared nanoparticles were characterised by scanning electron microscope. Activity of nanosuspension formulation was assessed by using four in vitro antioxidant assays. S. marianum, E. cardamomum and C. sativum particle size was observed to fall in range of 446.1 ± 112.6, 456.63 ± 339.2 and 432.1 ± 172.8 nm, respectively, most of the particles were having spherical shape and smooth topology. These synthesised nanoparticles were found to be more effective against quenching free radical than their crude extracts and standards [butylated hydroxyl toluene and ascorbic acid]. C. sativum nanosuspension showed most free radical scavenging potential against 2,2-diphenyl-1-picrylhdrazyl (DPPH) and superoxide free radical scavenging assays (IC₅₀ 0.59 ± 0.01 and 0.81 ± 0.11 mg/ml). S. marianum nanosuspension was found to be most effective against DPPH radicals scavenging (IC₅₀ 0.34 ± 0.02 mg/ml). It was concluded that nanosuspension of herbal medicines potentiates the antioxidant potential.     

Conducting carbon/polymer composites as a catalyst support for proton exchange membrane fuel cells

Carbon/poly(3,4‐ethylene dioxythiophene) (C/PEDOT) composites are synthesized by in situ chemical oxidative polymerization of EDOT monomer on carbon black in order to decrease carbon corrosion that occurred in carbon‐supported catalysts used in proton exchange membrane fuel cell. The effects of different dopants including polystyrene sulfonic acid, p‐toluenesulfonic acid and camphorsulfonic acid with the addition of ethylene glycol or dimethyl sulfoxide on the properties of the composites are investigated. The synthesized composites are characterized by X‐ray diffraction, Fourier transform infrared spectroscopy, thermogravimetric analysis, surface area analysis and scanning electron microscope. Electrical conductivity is determined by using the four‐point probe technique. Electrochemical oxidation characteristics of the synthesized C/PEDOT composites are investigated by cyclic voltammetry by applying 1.2 V for 24 h. The composite prepared at 25 °C with p‐toluenesulfonic acid and ethylene glycol shows the best carbon corrosion resistance. Platinum‐supported catalyst by using this composite was prepared using microwave irradiation technique, and it was seen that the prepared catalyst did not significantly lose its hydrogen oxidation and oxygen reduction reaction activities after electrochemical oxidation. Copyright © 2013 John Wiley & Sons, Ltd.     

Polymerization of epoxides catalyzed by a mixed‐valent iron trifluoroacetate [Fe3O(O2CCF3)6(H2O)3]

The readily available mixed‐valent iron trifluoroacetate complex [Fe₂^IIIFe^II(µ₃‐O)(O₂CCF₃)₆(H₂O)₃] is an effective catalyst for the polymerization of epoxides. A very small amount of the catalyst (1.0–0.01 mol%) could initiate the polymerization of cyclohexene oxide, cyclopentene oxide and epichlorohydrin. Based on quantitative end‐group analysis by ¹⁹F NMR spectroscopy, a Lewis acid (LA^⊕) catalyzed anionic reaction mechanism is proposed. Copyright © 2012 Society of Chemical Industry     

A Novel Sprague-Dawley Rat Model Presents Improved NASH/NAFLD Symptoms with PEG Coated Vitexin Liposomes

Chronic liver disease (CLD) is a global threat to the human population, with manifestations resulting from alcohol-related liver disease (ALD) and non-alcohol fatty liver disease (NAFLD). NAFLD, if not treated, may progress to non-alcoholic steatohepatitis (NASH). Furthermore, inflammation leads to liver fibrosis, cirrhosis, and hepatocellular carcinoma. Vitexin, a natural flavonoid, has been recently reported for inhibiting NAFLD. It is a lipogenesis inhibitor and activates lipolysis and fatty acid oxidation. In addition, owing to its antioxidant properties, it appeared as a hepatoprotective candidate. However, it exhibits low bioavailability and low efficacy due to its hydrophobic nature. A novel rat model for liver cirrhosis was developed by CCL4/Urethane co-administration. Vitexin encapsulated liposomes were synthesized by the ‘thin-film hydration’ method. Polyethylene glycol (PEG) was coated on liposomes to enhance stability and stealth effect. The diseased rats were then treated with vitexin and PEGylated vitexin liposomes, administered intravenously and orally. Results ascertained the liposomal encapsulation of vitexin and subsequent PEG coating to be a substantial strategy for treating liver cirrhosis through oral drug delivery.     

Dark fermentative hydrogen production from sucrose and molasses

There are many factors affecting the dark fermentative hydrogen production. The interaction of these factors, that is, their combined effects, should be investigated for better design of the systems with stable and higher hydrogen yields. This study aimed to investigate the combined effects of initial substrate, pH, and biomass (or initial substrate to biomass) values on hydrogen production from sucrose and sugar‐beet molasses. Therefore, optimum initial chemical oxygen demand (COD), pH, and volatile suspended solids (VSS) or initial substrate to biomass (VSS) ratio (S/X_o) values leading to the highest dark fermentative hydrogen production were investigated in batch reactors. An experimental design approach (response surface methodology) was used. Results revealed that when sucrose was the substrate, maximum hydrogen production yield (HY) of 2.3 mol H₂/mol sucrose_added was obtained at initial pH of 7 and COD of 10 g/L. Initial S/X_o values studied (4–20 g COD/g VSS) had no effect on HY, while the initial pH was found as the parameter mostly affecting both HY and hydrogen production rate (HPR). When substrate was molasses, initial COD concentration was the only variable affecting HY and HPR. Maximum of both was achieved at 10 g/L initial COD. Initial VSS values studied (2.5–7.5 g/L) had no effect on HPR and HY. This study also indicated that molasses leads to homoacetogenesis for potentially containing intrinsic microorganism and/or natural constituents; thus, sucrose is more advantageous for hydrogen production via fermentation. Homoacetogenesis should be prevented for effective optimization via response surface methodology, if substrate is a natural carbon source potential to have intrinsic microorganisms. Copyright © 2017 John Wiley & Sons, Ltd.     

Size and expansion ratio analysis of micro nozzle gas flow

Size and expansion ratio effects on the flowfield are investigated for micro converging-diverging nozzles. Numerical computations are conducted by using two dimensional augmented Burnett equations and Navier-Stokes equations that were derived from the Boltzmann equation. The Maxwell-Smoluchowski slip boundary condition is used for adiabatic walls, and Steger-Warming flux vector splitting scheme is applied to the convective inviscid flux terms. The results from the augmented Burnett equation are compared with Navier-Stokes and Direct Simulation Monte Carlo (DSMC) results. Then, nozzle-size analysis is conducted for between 2 µm and 100 µm throat width. Influence of the Knudsen number is investigated, and temperature and Mach number variations are presented. In addition, the influence of the expansion ratio is studied with three (1.7:1, 3.4:1, and 6.8:1) different configurations. The results are compared with each other and an experimental data in the literature.     

Direct pyrolysis mass spectrometry analysis of fresh and aged $\hbox{PF}_{6}^{-}$‐doped polythiophenes

In this study, pyrolysis mass spectrometry has been applied for the investigation of thermal characteristics of ‐doped polythiophene (PTh) films. Thermal degradation of PTh showed behaviour identical with ‐doped polythiophene (BF₄‐PTh), indicating that the effects of the dopants in question on the thermal characteristics of the PTh are not significant. Besides the oligomer peaks (up to hexamer), peaks indicating decomposition of the thiophene ring have also been detected as in the case of BF₄‐PTh. However, the data also indicated that the oxidation of the dopant was much more effective, yielding mainly POF₃, H₃PO₄ compounds even for the freshly prepared samples. Upon ageing, the yield of these products increased and exposure to air for more than 50 days also caused degradation of the PTh chains. Furthermore, substitution of the thiophene (Th) ring by fluorine has been recorded and was associated with reactions of Th with the reactive oxidation products of the dopant. Analyses of the de‐doped samples showed that although de‐doping was effective to a certain extent, inward diffusion of the counter ion (C₄H₉)₄N⁺ has also occurred. This diffusion was more efficient than that was observed for BF₄‐PTh samples. Copyright © 2004 Society of Chemical Industry     

An upgraded artificial bee colony (ABC) algorithm for constrained optimization problems

Artificial bee colony (ABC) algorithm developed by Karaboga is a nature inspired metaheuristic based on honey bee foraging behavior. It was successfully applied to continuous unconstrained optimization problems and later it was extended to constrained design problems as well. This paper introduces an upgraded artificial bee colony (UABC) algorithm for constrained optimization problems. Our UABC algorithm enhances fine-tuning characteristics of the modification rate parameter and employs modified scout bee phase of the ABC algorithm. This upgraded algorithm has been implemented and tested on standard engineering benchmark problems and the performance was compared to the performance of the latest Akay and Karaboga’s ABC algorithm. Our numerical results show that the proposed UABC algorithm produces better or equal best and average solutions in less evaluations in all cases.     

Anode effect elimination by subsonic and sonic vibrations

The only method so far used industrially to produce primary aluminum is the combination of the Bayer process with the Hall-Héroult process. The production process of aluminum which was patented by Charles Martin Hall and Paul Louis Toussaint Héroult in 1886, has long been important in our daily lives and that importance is likely to increase year by year. In this study, different subsonic and sonic vibrations, which were obtained from a 0.30 kW, 1,400 rpm three-phase motor, also a 0.55 kW, 2,800 rpm three-phase motor and 0.75 kW frequency converter, were applied to a laboratory-type aluminum electrolysis cell and the possibility of eliminating the anode effect was investigated.     

Synthesis of nanocrystalline samarium-doped CeO2 (SDC) powders as a solid electrolyte by using a simple solvothermal route

Samarium-doped CeO₂ is a leading electrolyte for applications in solid oxide fuel cells (SOFCs), which requires a typical sintering temperature of 1400–1600 °C. In this work, fully dense CeO₂ ceramics doped with 10–20 at.% samarium have been fabricated by a simple polyol process. The XRD and SEM results show that a complete solid solution between CeO₂ and samarium was obtained at the sintering temperature of 1300 °C. And also the densification temperature is significantly lower than those (1400–1600 °C) reported for the SDC powders processed by modified sol–gel process and hydrothermal treatment. The resultant ceramics show the sizes of ultrafine grain are lower than 1 μm.