A comparative study on structural,morphological and photocatalytic properties of anodically grown ZnO nanowires under varying parameters

Journal of Materials Science: Materials in Electronics - In this study, zinc oxide (ZnO) nanowires (NWs) were successfully produced on Zn plates through electrochemical anodization in potassium...     

Supply chain network design using an integrated neuro-fuzzy and MILP approach: A comparative design study

In this study, an integrated supply chain (SC) design model is developed and a SC network design case is examined for a reputable multinational company in alcohol free beverage sector. Here, a three echelon SC network is considered under demand uncertainty and the proposed integrated neuro-fuzzy and mixed integer linear programming (MILP) approach is applied to this network to realize the design effectively. Matlab 7.0 is used for neuro-fuzzy demand forecasting and, the MILP model is solved using Lingo 10.0. Then Matlab 7.0 is used for artificial neural network (ANN) simulation to supply a comparative study and to show the applicability and efficiency of ANN simulation for this type of problem. By evaluating the output data, the SC network for this case is designed, and the optimal product flow between the factories, warehouses and distributors are calculated. Also it is proved that the ANN simulation can be used instead of analytical computations because of ensuring a simplified representation for this method and time saving.     

The effects of Cu and Al on dry sliding wear properties of eutectic Sn-9Zn lead-free solder alloy

The present study investigates the influence of Cu and Al on microstructure and wear behavior of a eutectic Sn-9Zn solder alloy. The Sn-9Zn–X alloy was produced by adding various amounts of Cu and Al through investment casting method. The produced Sn-9Zn–X alloys were characterized by a scanning electron microscope, X-ray diffraction, and hardness measurements. In wear tests at 1 ms^?1 sliding speed, 10 N load and 5 different sliding distances (400–2000 m) were used. The results show that as the amount of Cu and Al increased within Sn-9Zn alloy, the hardness of the alloy increased as well. Depending on the increase in hardness of the alloys produced by investment casting, it was observed that weight loss decreased during wear tests. Furthermore, the same proportion of added Al alloys’ hardness and weight loss were observed to be higher than the added Cu alloys. Furthermore, the Cu-added alloy exhibited higher hardness and lower weight loss than the Al-added alloy did.     

Mechanochemical processing and microstructural characterization of pure Fe2B nanocrystals

The results of current investigation demonstrate that mechanochemical processing can be used to synthesize high purity Fe₂B nanocrystals by selecting well-optimized milling conditions, reaction paths and proper starting materials. Microstructure, phase analyses, specific surface area, and magnetic properties of the synthesized nanocrystals were examined by using X-ray diffraction/spectroscopy, electron microscopy, nitrogen adsorption–desorption methods following Brunauer-Emmett-Teller equation and vibrating sample magnetometer techniques, respectively. Removal of MgO impurity phase by leaching the resulting powder in the acetic acid solution yielded single phase Fe₂B nanocrystals with the crystallite size and specific surface area of 12.5 nm and 29 m²/g, respectively. Magnetization results clearly indicated the ferromagnetic behavior of Fe₂B nanocrystals with saturation magnetization observed around 96.26 emu·g^?1. Electron microscope images revealed coaxial/spherical powder shape and morphology of the single-phase Fe₂B nanocrystals.     

Efficiency of an Otto engine under alternative power optimizations

The proper optimization criterion to be chosen for the optimum design of the heat engines may differ depending on their purposes and working conditions. In this study, a comparative performance analysis is carried out for a reversible Otto cycle based on three alternative performance criteria namely maximum power (mp), maximum power density (mpd) and maximum efficient power (mep). The power density criterion is defined as the power per minimum specific volume in the cycle and the efficient power criterion is defined as multiplication of the power by the efficiency of the Otto cycle. Maximizing the efficient power gives a compromise between power and efficiency. Three different objective functions are defined and maximization of these functions is carried out under different design parameters of the Otto engine. The variations of power, power density and efficient power outputs are derived and presented with respect to the thermal efficiency of the cycle for various temperature ratios. It has been found that the design parameters at mep conditions lead to more efficient engines than that at the mp condition and the mep criterion may have a significant power advantage compared with mpd criterion. Copyright © 2009 John Wiley & Sons, Ltd.     

Investigation of current‐voltage characteristics and current conduction mechanisms in composites of polyvinyl alcohol and bismuth oxide

Temperature dependent current‐voltage (I–V) measurements of Au/Polyvinyl Alcohol + Bi₂O₃/n‐Si structure were conducted between 100 and 350 K for investigating the temperature dependence of I–V characteristics and current conduction mechanisms in the structure. Series resistance of the structure is calculated using Ohm's law and Cheungs' method. Ideality factor (n) and zero‐bias barrier height (Φ_Bo) were obtained considering thermionic emission theory. From 100 to 350 K, n changed from 32.1 to 3.54, and Φ_Bo changed from 0.27 to 0.99 eV. Obtained temperature dependent values of n and Φ_Bo suggested that thermionic emission is not the dominant current conduction mechanism. Therefore, Ln(I)–Ln(V) curves of the studied structure were plotted for investigating current conduction mechanisms in the structure and current flow is explained considering space charge limited current. Moreover, density of interface states (D_it) in the structure were calculated and its temperature dependence was investigated such that D_it values are reduced to the order of ～10¹³ eV^?1 cm^?2 from ～10¹⁴ eV^?1 cm^?2 with increasing temperature. POLYM. ENG. SCI., 54:1811–1816, 2014. © 2013 Society of Plastics Engineers     

Differentiation of Mechanically and Chemically Extracted Hazelnut Oils Based on their Sterol and Wax Profiles

The sterol and wax content of solvent extracted (SEHO) and cold pressed hazelnut oils (CPHO) were compared. A total of 48 samples from 19 hazelnut varieties were collected for two successive crop years from four different geographical districts in Turkey. Hazelnuts were processed to oil with a laboratory scale press, than the remaining oil in cake was extracted with n‐hexane. CPHO and SEHO were evaluated for their wax, sterol and squalene contents. Results showed that sterol, squalene and wax contents of all individual cultivars were higher in SEHO than those of CPHO, indicating the higher solubility of these compounds in solvent. Total sterol contents ranged between 1088.56 (Kargalak)—1609.39 mg/kg (Mincane) for CPHO and 1590.86 (Çak?ldak)—2897.26 mg/kg (Mincane) for SEHO. Hazelnut oils were found to be richer of C36‐38 esters than C40‐46 group. Total wax content was between 24.19 (Kargalak)—94.58 mg/kg (Ku?) for CPHO and 81.46 (Kargalak)—160.92 mg/kg (Akçakoca) for SEHO. The squalene amounts of the samples obtained by hexane extraction were between 499.75 (Allahverdi)—885.36 mg/kg (Cavcava), while it varied between 288.55 (Kargalak)—647.68 mg/kg (Mincane) in cold pressed oils. Significant and obvious variations between SEHO and CPHO were verified by principal component and hierarchical cluster analysis. Geographical discrimination was also achieved by discriminant analysis.     

Micro-RNA and Proteomic Profiles of Plasma-Derived Exosomes from Irradiated Mice Reveal Molecular Changes Preventing Apoptosis in Neonatal Cerebellum

Cell communication via exosomes is capable of influencing cell fate in stress situations such as exposure to ionizing radiation. In vitro and in vivo studies have shown that exosomes might play a role in out-of-target radiation effects by carrying molecular signaling mediators of radiation damage, as well as opposite protective functions resulting in resistance to radiotherapy. However, a global understanding of exosomes and their radiation-induced regulation, especially within the context of an intact mammalian organism, has been lacking. In this in vivo study, we demonstrate that, compared to sham-irradiated (SI) mice, a distinct pattern of proteins and miRNAs is found packaged into circulating plasma exosomes after whole-body and partial-body irradiation (WBI and PBI) with 2 Gy X-rays. A high number of deregulated proteins (59% of WBI and 67% of PBI) was found in the exosomes of irradiated mice. In total, 57 and 13 miRNAs were deregulated in WBI and PBI groups, respectively, suggesting that the miRNA cargo is influenced by the tissue volume exposed to radiation. In addition, five miRNAs (miR-99b-3p, miR-200a-3p, miR-200a, miR-182-5p, miR-182) were commonly overexpressed in the exosomes from the WBI and PBI groups. In this study, particular emphasis was also given to the determination of the in vivo effect of exosome transfer by intracranial injection in the highly radiosensitive neonatal cerebellum at postnatal day 3. In accordance with a major overall anti-apoptotic function of the commonly deregulated miRNAs, here, we report that exosomes from the plasma of irradiated mice, especially in the case of WBI, prevent radiation-induced apoptosis, thus holding promise for exosome-based future therapeutic applications against radiation injury.