An investigation of the synthesis and thermal stability of poly(dl-lactide)

Summary The synthesis and thermal degradability of poly (DL-lactide) were investigated. Key factors affecting the polymer molecular weight were found to be monomer recrystallization, initiator concentration and the vacuum level during drying/sealing of the polymerization reaction ampoule. It was found that poly (DL-lactide) is thermally unstable above its melting temperature. Monomer recrystallization, polymer precipitation and a low initiator content of the polymer significantly inhibited the rate and extent of thermal degradation.     

Technology adaptation: a typology for strategic human resource management

Organizational adjustment to technological change and its impact upon human resources should be based on an understanding of employee perceptions and behavioural responses to such developments. An analytic framework which relates strategic choice to internal labour market and employee determinism is derived from the methods employed by organizational theorists and psychologists to generate a set of typologies. The framework divides variables in four classes: (1) natural selection, with minimum choice and adaptation or selection out; (2) differentiation, with high choice and high employee determinism and adaptation within constraints; (3) strategic choice, with maximum choice and adaptation by design; and (4) undifferentiated choice, with incremental choice and adaptation by chance. Useful in reconciling previously inconsistent or incompatible theories of technological change, the framework is offered as a co-ordination device to integrate the results of divergent approaches to technological adaptation studies.     

Coefficient of friction and subjective assessment of slippery work surfaces.

Research was conducted to determine how well subjects could distinguish between surfaces with different coefficient of friction (COF) values and to evaluate how well subjective ratings of slipperiness correlated with the actual COF values. Thirty-three ironworkers experienced in working and walking on steel surfaces and 23 university students inexperienced with these tasks participated in the study. Subjective slipperiness ratings for a variety of climbing and walking conditions were obtained from the subjects. It was found that subjects could identify differences in the slipperiness of four types of steel coatings tested in the study. There was a high correlation between the subjective ratings and the measured COF values. Subjects did not slip at a COF of 0.41 but did lose footing at a COF of 0.20.     

Bologna process revisited: educating information security and malware experts

The Bologna process has resulted in the re- structuring of undergraduate and graduate education across Europe. This paper outlines what these changes mean for acquiring degrees in information security and how various universities have tried to respond to these demands. What is unclear at this stage is how the offering of continuous master degrees at Polytechnic and Applied Science Universities will affect the content and curriculum being taught in computer science and information security in particular. This question must be addressed since polytechnics are more industry focused and less research oriented than their university-counterparts. What seems to be clear at this stage is that continuous type master programs in computer science demand a greater level of mathematical knowledge than specialized masters. Moreover, due to the amount of credits that must be acquired, graduates of these types of programs will bring a deeper knowledge about the specialization such as, information security or malware, they acquired at university. This movement toward greater convergence in post secondary education may not have made things easier for recruiters, who are trying to hire graduates in information security or anti-virus experts. In fact, as this paper shows while the Bologna process may have eliminated the obvious differences, countless intricate and not so obvious differences have been added making it sometimes obscure for a bystander.     

Bestimmung des Herbicids Glyphosat und dessen Hauptmetabolit Aminomethylphosphons?ure (AMPA) in Trinkwasser mit Hilfe der HPLC

Zusammenfassung Es wird eine Methode zur Bestimmung von Glyphosat und dessen Hauptmetabolit Aminomethylphosphonsäure (AMPA) in Trinkwasser beschrieben, die es erlaubt, den in der Schweiz geforderten Toleranzwert von 0,1 g/1 zu erreichen (Nachweisgrenze 0,02 g/l). Die Wasserprobe wird dabei direkt mit 9-Fluorenylmethyl-chloroformaat (FMOCCI) versetzt, um extrahierbare und gleichzeitig fluorescierende Derivate zu erhalten. Diese werden nach Ausschütteln mit einem organischen Lösungsmittelgemisch durch HPLC mit Fluorescenzdetektor bestimmt. In bisher 151 untersuchten Trinkwasserproben des Kantons Bern konnten weder Glyphosat noch AMPA nachgewiesen werden.

---

Determination of glyphosate herbicide and its main metabolite aminomethylphosphonic acid (AMPA) in drinking water by HPLC

Summary A method for the determination of glyphosate and its major metabolite aminomethylphosphonic acid (AMPA) is described. With a detection limit of 0.02 g/l, the method suitably fulfills the requirements of the Swiss legislation (tolerance value of 0.1 g/l water). The compounds are derivatized directly in the original water sample with 9-fluorenylmethyl chloroformate (FMOCCI) in order to obtain extractable and fluorescent derivatives. These are extracted with organic solvents and determined by HPLC using a fluorescence detector. Neither of the compounds could be detected in 151 tap water samples from the Canton of Berne.

     

Processing of Particle-Stabilized Wet Foams Into Porous Ceramics

Direct foaming of colloidal suspensions is a simple and versatile approach for the fabrication of macroporous ceramic materials. Wet foams produced by this method can be stabilized by long-chain surfactants or by colloidal particles. In this work, we investigate the processing of particle-stabilized wet foams into crack-free macroporous ceramics. The processing steps are discussed with particular emphasis on the consolidation and drying process of wet foams. Macroporous alumina ceramics prepared using different consolidation and drying methods are compared in terms of their final microstructure, porosity, and compressive strength. Consolidation of the wet foam by particle coagulation before drying resulted in porous alumina with a closed-cell structure, a porosity of 86.5%, an average cell size of 35 μm, and a remarkable compressive strength of 16.3 MPa. On the other hand, wet foams consolidated via gelation of the liquid within the foam lamella led to porous structures with interconnected cells in the size range from 100 to 150 μm. The tailored microstructure and high mechanical strength of the macroporous ceramics can be of interest for the manufacture of bio-scaffolds, thermal insulators, impact absorbers, separation membranes, and light weight ceramics.     

Zur Selbstdiffusion von Benzol und Azeton in Polymethylmethacrylat

The selfdiffusion coefficients of acetone and benzene are studied in the systems acetone/poly(methylmethacrylate) and benzene/poly(methylmethacrylate) by means of the spin echo technique as function of concentration and temperature. From the dependence of temperature, the activation energies are calculated as function of concentration. The dependence of concentration of the selfdiffusion coefficients is discussed using the theory of Free Volume according to FUJITA. The Free Volume of the poly(methylmethacrylate) is calculated as function of temperature.     

The Price of Anarchy in Network Creation Games Is (Mostly) Constant

We study the price of anarchy and the structure of equilibria in network creation games. A network creation game is played by n players {1,2,…,n}, each identified with a vertex of a graph (network), where the strategy of player i, i=1,…,n, is to build some edges adjacent to i. The cost of building an edge is α>0, a fixed parameter of the game. The goal of every player is to minimize its creation cost plus its usage cost. The creation cost of player i is α times the number of built edges. In the SumGame variant, the usage cost of player i is the sum of distances from i to every node of the resulting graph. In the MaxGame variant, the usage cost is the eccentricity of i in the resulting graph of the game. In this paper we improve previously known bounds on the price of anarchy of the game (of both variants) for various ranges of α, and give new insights into the structure of equilibria for various values of α. The two main results of the paper show that for α>273?n all equilibria in SumGame are trees and thus the price of anarchy is constant, and that for α>129 all equilibria in MaxGame are trees and the price of anarchy is constant. For SumGame this answers (almost completely) one of the fundamental open problems in the field—is price of anarchy of the network creation game constant for all values of α?—in an affirmative way, up to a tiny range of α.