The localisation of TPPS4 in some organs and its possible nephrotoxicity in rats

Endogenous opioids have been implicated in the mechanism of action of antidepressant drugs. In this study, we evaluated effects of single and repeated imipramine administration on proenkephalin and prodynorphin gene expression in the rat nucleus accumbens and striatum. In situ hybridization study showed that single imipramine injection (10 mg/kg, i.p.) decreased the level of proenkephalin (by ca. 20%) and prodynorphin (by ca. 25%) mRNA to the same extent in both structures. Repeated imipramine administration (10 mg/kg i.p. twice daily for 10 days) had no effect on proenkephalin mRNA level, whereas the prodynorphin gene expression was regulated differently. At 3 h after the last dose of imipramine the prodynorphin mRNA level was decreased (by ca. 25%) in the striatum, but not in the nucleus accumbens, whereas at 24 h an up-regulation (by ca. 27%) of prodynorphin mRNA level could be observed in the nucleus accumbens only. In the light of involvement of opioids in mood regulation, these adaptive changes may participate in neurochemical mechanisms of antidepressant therapy.     

Floral volatiles ofTanacetum vulgare L. attractive toLobesia botrana den. et schiff. females

The European grapevine moth (EGVM),Lobesia botrana, is a major pest of grapes in Europe. Females are attracted to a nonhost plant: tansy (Tanacetum vulgare L.), which is a common weed in Slovakian vineyards. A steam distillate extract of tansy flowers was analyzed by means of a GC-EAG technique to screen constituents detected by the olfactory receptors of EGVM females. From more than 200 GC peaks, nine peaks corresponding to monoterpenoids released an EAG response in more than 70% of the females (N=15):p-cymene,d-limonene,-thujene,-thujone,-thujone, thujyl alcohol, terpinene-4-ol, (Z)-verbenol, and piperitone. The steam distillate of tansy as well as a synthetic blend of identified compounds released consistent attraction in a field cage. The use of nonhost plants and host plant odors in integrated pest management is discussed.     

The genesis of polyaniline nanotubes

Aniline has been oxidized with ammonium peroxydisulfate in 0.4 M acetic acid. Protons are produced in the course of oxidation and the pH decreases as the reaction proceeds. The oxidation had two subsequent phases: (1) the oxidation of the neutral aniline molecules and the initially produced low-molecular weight aniline oligomers at low acidity, followed by (2) the oxidation of the anilinium cation after the acidity became higher. The two phases of oxidation gave different products, aniline oligomers with mixed ortho- and para-coupling of aniline molecules, and polyaniline nanotubes, respectively.The aniline oligomers are produced at first at low acidity, pH > 4, some of them as rod-like crystals. The molecular weight of the oligomers has been assessed by gel-permeation chromatography to be of several thousands. The 2-3 wt.% content of sulfur in deprotonated samples suggests that the oxidation products are partly sulfonated. The oxidation of ortho-coupled anilines combined with intramolecular cyclization produces phenazine units or their blocks, as indicated by FTIR spectra. A high-molecular weight polyaniline is produced at pH < 2. The protonation of the intermediate pernigraniline form of polyaniline is a prerequisite for the polymerization.The nano-sized oligomer crystallites serve as starting templates for the nucleation of PANI nanotubes. Further growth of nanotubes proceeds by the self-organization of the phenazine units or their blocks located at the ends of the PANI chains. Polyaniline nanotubes have a typical outer diameter of 100-200 nm, with a wall thickness of 50-100 nm, an inner diameter of 0-100 nm, and a length extending to several micrometres.     

Solid-state NMR characterization of motion in flexible polyurethane foams

High-resolution solid-state ¹³C-NMR has been used to study the phase separation and molecular motion in two series of polyurethane foams. These two series differ by one possessing the additive of lithium chloride, LiCl. NMR relaxation times can map the motion throughout the polymer molecule and detect changes in that motion arising from either microseparation or phase mixing between the different segments. There are only slight changes in the soft segment T_1p(¹³C) values as well as an increase in the hard segment T_1p(¹H) values with increase in the hard segment content for the foams studied. The T_1p(¹H) and T_1p(¹³C) values do indicate that the phase separation of the hard and soft segments is similar for all foams. A decrease in the T_1p(¹H) and T_1p(¹³C) values with increasing LiCl content indicates that the motion of the soft segments is restricted more by the hard segments. This is explained by more phase mixing in the foams containing the LiCl additive. © 1994 John Wiley & Sons, Inc.     

Frequency stabilization of a green He-Ne laser

A new process for stabilizing the frequency of commercially available 543-nm He-Ne lasers is described. The stabilization method is based on anomalous dispersion of the gain medium. A total of four green lasers have been stabilized-two at the National Institute of Standards and Technology and two at the Institute of Scientific Instruments of the Czech Academy of Sciences-making it possible to study frequency variations of the lasers relative to each other. We have also stabilized a 633-nm laser by the use of the same method used for 543 nm.     

A two-level approach to implicit surface modeling with compactly supported radial basis functions

We describe a two-level method for computing a function whose zero-level set is the surface reconstructed from given points scattered over the surface and associated with surface normal vectors. The function is defined as a linear combination of compactly supported radial basis functions (CSRBFs). The method preserves the simplicity and efficiency of implicit surface interpolation with CSRBFs and the reconstructed implicit surface owns the attributes, which are previously only associated with globally supported or globally regularized radial basis functions, such as exhibiting less extra zero-level sets, suitable for inside and outside tests. First, in the coarse scale approximation, we choose basis function centers on a grid that covers the enlarged bounding box of the given point set and compute their signed distances to the underlying surface using local quadratic approximations of the nearest surface points. Then a fitting to the residual errors on the surface points and additional off-surface points is performed with fine scale basis functions. The final function is the sum of the two intermediate functions and is a good approximation of the signed distance field to the surface in the bounding box. Examples of surface reconstruction and set operations between shapes are provided.     

Novel inorganic precursors [Co4.32Zn1.68(HCO2)18(C2H8N)6]/SiO2 and Co4.32Zn1.68(HCO2)18(C2H8N)6]/Al2O3 for Fischer–Tropsch synthesis

The silica- and alumina-supported Co–Zn catalysts were synthesized by thermal decomposition of new inorganic precursors [Co_4.32Zn_1.68(HCO₂)₁₈(C₂H₈N)₆]/SiO₂ or Al₂O₃. A novel coordination polymer formulated as [Co_4.32Zn_1.68(HCO₂)₁₈(C₂H₈N)₆] (1) was prepared using the solvothermal technique and characterized by elemental analysis, FT-infrared spectroscopy. Thermal stability of the complex 1 was investigated by thermogravimetric analysis and differential scanning calorimetry, and its structure was determined by single-crystal X-ray diffraction. Characterization of catalysts was carried out using powder X-ray diffraction (XRD), scanning electron microscopy (SEM), and BET specific surface area. The catalysts were evaluated for Fischer–Tropsch synthesis (FTS) in the temperature range 200–300 °C. The results revealed that the synthesized catalysts have higher selectivity to the desired products at 260 °C. The performance of the catalysts was compared to those of catalysts constructed via impregnation method and the fabricated catalysts show higher activity and selectivity than the reference catalysts.     

Grafting of gold nanoparticles and nanorods on plasma-treated polymers by thiols

Grafting of gold nanoparticles and nanorods on the surface of polymers, modified by plasma discharge, is studied with the aim to create structures with potential applications in electronics or tissue engineering. Surfaces of polyethyleneterephthalate and polytetrafluoroethylene were modified by plasma discharge and subsequently, grafted with 2-mercaptoethanol, 4,4′-biphenyldithiol, and cysteamine. The thiols are expected to be fixed via one of –OH, –SH or –NH₂ groups to reactive places on the polymer surface created by the plasma treatment. “Free” –SH groups are allowed to interact (graft) with gold nanoparticles and nanorods. Gold nano-objects were characterized before grafting by transmission electron microscopy and UV–Vis spectroscopy. X-ray photoelectron spectroscopy (XPS), Fourier transform infrared spectroscopy (FTIR), and electrokinetic analysis (zeta potential determination) were used for the characterization of polymer surface at different modification phases. It was proved by FTIR and XPS measurements that the thiols were chemically bonded on the surface of the plasma-treated polymers, and they mediate subsequent grafting of the gold nano-objects. On the surfaces, modified polymers were indicated some objects by AFM, size of which was dramatically larger in comparison with that of original nanoparticles and nanorods. This result and the other results of UV–Vis spectroscopy indicate an aggregation of deposited gold nano-objects.     

Mechanical properties of polyaniline

In spite of extensive electrical characterization of polyaniline, the information on its mechanical properties is missing in the literature. Complex Young's modulus of polyaniline compressed into pellets was measured at room temperature and an influence of preparation conditions of the polyaniline pellets on mechanical properties was studied. Young's modulus of PANI hydrochloride pellets was 0.9 ± 0.2 GPa and that of polyaniline base 1.3 ± 0.2 GPa. These values are comparable with common polymers, such as bulk polystyrene, 1.8 ± 0.1 GPa, or compressed polystyrene powder, 0.80 ± 0.02 GPa. Modulus of polyaniline is independent of the compression pressure above 300 MPa, the time of compression had no effect.     

The carbonization of colloidal polyaniline nanoparticles to nitrogen‐containing carbon analogues

The carbonization of nanostructures afforded by conducting polymers represents a new route to the preparation of functional nanostructured carbons. The exposure of colloidal polyaniline particles stabilized with poly(N‐vinylpyrrolidone) or silica nanoparticles at 650 °C in inert atmosphere led, in both cases, to nitrogen‐containing carbonaceous materials with specific surface areas of 200 and 205 m² g^?1, respectively, and conductivities of 8.3 × 10^?7 and 1.9 × 10^?10 S cm^?1, respectively. The latter material contained 77 wt% of silica. The original particulate nanostructure of the samples was preserved after carbonization. The carbon‐to‐nitrogen atomic ratio was 7.2 and 7.9; the nitrogen content in the carbonized polyaniline–poly(N‐vinylpyrrolidone) particles was 10.8 wt%. Thermogravimetric analysis in air revealed their stability to be up to 500 °C. This is comparable with commercial multi‐wall carbon nanotubes, which have similar areas of application. The nitrogen‐containing carbons are potentially useful as supports for catalysts and in applications where carbon of higher hydrophilicity would be of benefit. Copyright © 2010 Society of Chemical Industry