Calf massager: Intervention for body muscle discomfort during prolonged standing

Many occupations require workers to stand for long periods of time without proper interventions, which causes discomfort in the back and lower limbs. Therefore, this study aims to assess the effectiveness in alleviating body muscle discomfort during prolonged standing through the use of a calf massager. This study was conducted among male workers at a manufacturer with production line workers and the list was obtained from the HR Department and simple random sampling was done by number categorization. A total of 100 respondents (50 respondents for both the control and the experimental groups) participated in this study. The experiment took place in a room with a similar setup for the production line. Each respondent was requested to perform the simulated task for 2 hr. For the experimental group, the calf massager was turned on every 15 min. At every 15‐min interval after turning on the calf massager, respondents from both groups were required to evaluate their discomfort level on a Borg's scale CR‐10 questionnaire. The results showed that the level of body discomfort among respondents in the experimental group reduced (20–30%) compared with that of the control group. Multivariate analysis results revealed that the discomfort rating for the lower back, knees, thighs, calves, and feet was significantly lower (p < .05) among the experimental group compared with the control group. For lower body parts, the lower back region was statistically significant (p < .05) at the 90th, 105th, and 120th min; the thigh region was statistically significant (p < .05) at the 120th min; the knee region was statistically significant (p < .05) at the 105th and 120th min; the calf region was statistically significant (p < .05) at all minute intervals except the 15th and 45th min, while the feet region, was statistically significant at the 105th and 120th min. Therefore, this study indicates that calf massage treatment is capable of reducing body muscle discomfort during prolonged standing and highlights the significance of calf massage.     

Structural and electronic properties of CuInSe2

Structural investigation on monocrystalline CuInSe₂ samples has been made. From the single crystal results, the space group of CuInSe₂ was confirmed to be Iˉ42d and the crystal solidification direction was investigated. Compositional uniformity of the ingots was established by EPMA and it was found that the indium concentration was greater than that for copper. Systematic annealing experiments were carried out in vacuum at different temperatures (as low as 160° C) and for different times. Large variation in resistivity was observed after the annealing treatment. P-type samples were found to convert to n-type after the heat-treatments.     

A New Image Analysis Based Method for Measuring Electrospun Nanofiber Diameter

In this paper, a new image analysis based method for electrospun nanofiber diameter measurement has been presented. The method was tested by a simulated image with known characteristics and a real web. Mean (M) and standard deviation (STD) of fiber diameter obtained using this method for the simulated image were 15.02 and 4.80 pixels respectively, compared to the true values of 15.35 and 4.47 pixels. For the real web, applying the method resulted in M and STD of 324 and 50.4 nm which are extremely close to the values of 319 and 42 nm obtained using manual method. The results show that this approach is successful in making fast, accurate automated measurements of electrospun fiber diameters.     

Extending the Kernighan/Lin Heuristic for Hardware and Software Functional Partitioning

The Kernighan/Lin graph partitioning heuristic, also known as min-cut or group migration, has been extended over several decades very successfully for circuit partitioning. Those extensions customized the heuristic and its associated data structure to rapidly compute the minimum-cut metric central to circuit partitioning; as such, those extensions are not directly applicable to other problems. In this paper, we extend the heuristic for functional partitioning, which in turn can solve the much investigated codesign problem of partitioning a system's coarse-grained functions among hardware and software components. The key extension customizes the heuristic and data structure to rapidly compute execution-time and communication metrics, crucial to hardware and software partitioning, and leads to near-linear time-complexity and excellent resulting quality. Another extension uses a new criteria for terminating the heuristic, eliminating time-consuming and unnecessary fine-tuning of a partition. Our experiments demonstrate extremely fast execution times (just a few seconds) with results matched only by the slower simulated annealing heuristic, meaning that the extended Kernighan/Lin heuristic will likely prove hard to beat for hardware and software functional partitioning.     

Scattering of an induced surface electromagnetic field by fatiguecracks in ferromagnetic metals

In crack detection and sizing by the alternating current field measurement technique, U-shaped wires or coils excited by a high-frequency AC current source can be used to induce the surface field in the workpiece. The authors present a modeling technique for the interaction of a fatigue crack in a ferromagnetic metal with the surface field resulting from an inducer with two U-shaped wires. This work is an extension of a previous modeling technique to have developed for infinitely long (one-dimensional) cracks. In the present technique, the boundary of the fatigue crack is approximated by a circular arc, leading to a formulation for an efficient computation of the field-flaw interaction. Various numerical and experimental results supporting the modeling and illustrating the behavior of the magnetic field and electric potential at the metal surface around circular-arc cracks are presented     

High frequency capacitance measurements on metal–insulator–semiconductor structures in thermal non-equilibrium condition

We simulate the charge carrier traffic between the energy bands and the interface states in structures like Al/SiO₂/6H–SiC, Al/diamond/Si and Al/SIPOS/Si to explain their high frequency capacitance–voltage behavior. The structures have in common that traditional electrical measurement techniques performed at room temperature are prone to thermal non-equilibrium effects. This can result in large errors in the interface data extracted from such studies when thermal equilibrium conditions are assumed. In this work, high frequency capacitance–voltage data are compared to numerical simulations which include such thermal non-equilibrium conditions to enable more accurate estimates of interface state parameters in above-mentioned structures.     

Mlcrolasers based on silica microspheres

Light can be confined efficiently in the high-Q, small-volume whispering-gallery-modes observed in silica microspheres. By coupling these microspheres to eroded optical fibers and fiber tips, direct mapping of the whispering-gallery modes has been achieved and the mode numbers have been assessed. The properties of these modes have allowed us to obtain laser action with very low thresholds in Nd-doped silica microspheres. Further projects in the field of non-linear optics and cavity quantum electrodynamics are described.     

A complete VARMA modelling methodology based on scalar components

Abstract. This article proposes an extension to scalar component methodology for the identification and estimation of VARMA models. The complete methodology determines the exact positions of all free parameters in any VARMA model with a predetermined embedded scalar component structure. This leads to an exactly identified system of equations that is estimated using full information maximum likelihood.     

Optical and electrical characterization of CdS thin films

Thin CdS films have been grown by chemical bath (CdCl₂, thiourea, ammonia) deposition (CBD) on SnO₂ (TO)-coated glass substrate for use as window materials in CdS/CdTe solar cells. High-resolution transmission electron microscopy revealed grains with an average size of 10 nm. The structure was predominantly hexagonal with a high density of stacking faults. The film crystallinity improved with annealing in air. Annealing in a CdCl₂ flux increased the grain size considerably and reduced the density of stacking faults. The optical transmission of the as-deposited films indicated a band gap energy of 2.41 eV. Annealing in air reduced the band gap by 0.1 eV. Annealing in CdCl₂ led to a sharper optical absorption edge that remained at 2.41 eV. Similar band gap values were obtained by photocurrent spectroscopy and electroabsorption spectroscopy (EEA) using an electrolyte contact. EEA spectra were broad for the as-deposited and air-annealed samples, but narrower for the CdCl₂-annealed films, reflecting the reduction in stacking fault density. Donor densities of ca. 10¹⁷ cm ^–3 were derived from the film/electrolyte junction capacitance.