Existence of solitary waves in a prestressed nonlinear thermoelastic medium with dry friction

V. I. Lenin Belorussian State University, Minsk. Translated from Inzhenerno-fizicheskii Zhurnal, Vol. 62, No. 1, pp. 140–145, January, 1992.     

Aramid pulp treated with imidazolium ionic liquids as a filler in rigid polyurethane bio-foams

This article reports an aramid pulp (AP) treated with two ionic liquids (IL), namely 1-n-butyl-3-methylimidazolium chloride (C₄.Cl) and 1-carboxymethyl-3-methylimidazolium chloride (HO₂C), and its use as a filler in reinforced rigid polyurethane foams (RPUF). The RPUF were incorporated with the treated AP at three weight fractions (c.a. 0.1, 0.5, and 1.0 wt%) and were produced by the free rising method. The results showed that the studied IL promoted a better interaction between the AP and the RPUF system, which increased the overall reactivity, imparting a higher cell anisotropy. This also yielded a positive effect in mechanical properties and thermal stability of the RPUF. Compared to the neat RPUF, outstanding increases of approximately 50 and 20% were achieved in compressive modulus and strength, respectively. In all, the use of IL promoted increased compatibility between matrix and reinforcement, especially that HO₂C IL.     

Tabu search for scheduling on identical parallel machines to minimize mean tardiness

This paper presents a tabu search approach for scheduling jobs on identical parallel machines with the objective of minimizing the mean tardiness. Initially, we consider a basic tabu search that uses short term memory only. Local search is performed on a neighborhood defined by two types of moves. Insert moves consist of transferring each job from one machine to another and swap moves are those obtained by exchanging each pair of jobs between two machines. Next, we analyze the incorporation of two diversification strategies with the aim of exploring unvisited regions of the solution space. The first strategy uses long term memory to store the frequency of the moves executed throughout the search and the second makes use of influential moves. Computational tests are performed on problems with up to 10 machines and 150 jobs. The heuristic performance is evaluated through a lower bound given by Lagrangean relaxation. A comparison is also made with respect to the best constructive heuristic reported in the literature.     

The cost of recovery in message logging protocols

Past research in message logging has focused on studying the relative overhead imposed by pessimistic, optimistic and causal protocols during failure-free executions. In this paper, we give the first experimental evaluation of the performance of these protocols during recovery. Our results suggest that applications face a complex tradeoff when choosing a message logging protocol for fault tolerance. On the one hand, optimistic protocols can provide fast failure-free execution and good performance during recovery, but are complex to implement and can create orphan processes. On the other hand, orphan-free protocols either risk being slow during recovery (e.g. sender-based pessimistic and causal protocols) or incur a substantial overhead during failure-free execution (e.g. receiver-based pessimistic protocols). To address this tradeoff, we propose hybrid logging protocols, which are a new class of orphan-free protocols. We show that hybrid protocols perform within 2% of causal logging during failure-free execution and within 2% of receiver-based logging during recovery     

Formation of Helium Porosity in Different Materials during Post-Radiation Annealing

The characterisitics of the development of helium porosity in bcc and fcc alloys and structural steel after irradiation with 40-keV He⁺ up to dose 5⋅10²⁰ m⁻² at 20°C and subsequent annealing at 650°C for 1 h and 5 h are studied by transmission electron microscopy. It it found that under these conditions smaller bubbles with high density are formed in bcc than in fcc materials. It is shown that for an annealing time of 5 h higher porosity is formed in all materials, except nickel, than with 1 h annealing. This is due to the inflow of thermal vacancies from the free surface. The data obtained are discussed from the standpoint of the formation of various helium-containing complexes, their thermal stability, and the diffusion mobility of the matrix atoms. __________ Translated from Atomnaya Energiya, Vol. 99, No. 2, pp. 115–120, August 2005.     

Nonwoven Ni–NiO/carbon fibers for electrochemical water oxidation

The development of technologically efficient anodes for water oxidation is crucial to improve hydrogen production via water splitting. Electrodes based on metallic active sites dispersed in carbon matrices have been shown to be an attractive way to attain this goal. However, challenges remain to prevent catalyst agglomeration that otherwise can result in a decrease of performance over time.In this work, we report an alternative and efficient method to produce nickel-nickel oxide nanoparticles-embedded in carbon nanofibers (Ni–NiO/C), by the solution blow spinning (SBS) process. Scanning electron microscopy (SEM) and transmission electron microscopy (TEM) analyses show the carbon nanofibrillar matrix as a robust support, with well-dispersed nickel nanoparticles on the surface. The responses of the linear scanning voltammetry, cyclic voltammetry and electrochemical impedance spectroscopy demonstrate how a small fraction of nickel on the fiber surface (≈1.2–5.3%) is enough to promote substantial improvement in performance (η = 278 and 309 mV vs RHE for 10 mA cm^?2) and a significant turnover frequency (TOF) values of 1.38 (η = 278) and 1.30 s^?1 (η = 309). These promising results are correlated with a large amount of Ni³⁺ present on the fiber surfaces, as identified by X-ray Photoelectron Spectroscopy (XPS). This work provides a low-cost and rapid preparation technique that can be extended for the manufacture of a wide variety of electrodes based on metals supported on carbon nanofibers.     

Single-phase and binary phase nanogranular ferrites for magnetic hyperthermia application

The study demonstrates the performance of heating efficiency in single-phase and binary phase spinel ferrite nanosystems. Ferrimagnetic cobalt ferrite (CoFe₂O₄) (CFO) and superparamagnetic copper ferrite/copper oxide (CuFe₂O₄/CuO) (CuF) nanosystems of different particle sizes were synthesized through a microwave-assisted coprecipitation method. The heating behavior was observed in range of both field amplitudes (8-24 kA/m at 516 kHz) and frequencies (325-973 kHz at 12 kA/m). The heating efficiency was analyzed and compared by means of particle size, magnetization, effective anisotropy constant, and Néel relaxation mechanism. Indeed, the heating rate was maximized in larger ferrite particles with low effective anisotropy constant. Moreover, though the magnetization and effective anisotropy constant of single-phase CoFe₂O₄ nanoparticles were higher, the binary phase CuFe₂O₄/CuO nanosystems of similar crystallite size (28 nm) exhibited superior heating efficiency (4.21°C/s). For a field amplitude and frequency of 24 kA/m and 516 kHz, the heating rate of CuF and CFO ferrites with different crystallite sizes decreased in the order of 4.21 > 2.14 > 0.58 > 0.52°C/s for 29 nm > 25 nm > 12 nm > 15 nm, respectively. The results emphasize that binary phase ferrite nanoparticles are better thermoseeds than the single-phase ferrites for the magnetic hyperthermia application.     

In situ compatibilization of a polyethylene,polypropylene, and polystyrene ternary blend through Friedel–Crafts alkylation

The Friedel–Crafts alkylation reaction has been applied to reactively compatibilize a ternary blend of high-density polyethylene (HDPE), polypropylene (PP), and polystyrene (PS). The reactions were carried out in an internal mixer using varying catalyst concentrations. The resulting compatibilizer was quantified after Soxhlet extraction. In addition, p-substitution due to the grafting of alkyl groups onto the PS benzene ring was identified via nuclear magnetic resonance spectroscopy. The size of the PS domain in the reactive compositions is decreased by 80%. Moreover, the phase in which PS droplets were dispersed varied, that is, in the nonreactive blends they were found in the PP phase and in the reactive blends they shifted toward the HDPE phase. The effect of the compatibilizing agent was to improve the mechanical properties of the blend. Even with the lowest catalyst content, the properties of elongation-at-break, tensile strength, toughness, and elastic modulus showed improvements. © 2019 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2020 , 137, 48295.