Investigation of the changes in physical properties of PES/PVC fabrics after aging

The aim of this work was to investigate the physical and mechanical performance of architectural polyester (PES)–poly(vinyl chloride) (PVC) membranes exposed to different artificial aging conditions. Two commercially available architectural membranes were chosen as research objects. The durability of the PES/PVC fabrics was evaluated by the loss in mechanical performance, scanning electron microscopy, and X-ray diffraction analysis in order to understand the effect of the degradation agents on the surface of the membranes. The mechanical performance of the PES/PVC membranes was unchanged. Scanning electron microscopy images of the tested materials showed initial cracks after aging. The X-ray fluorescence analysis showed that at the time of aging, the amount of Cl and Si decreased slightly, while Ti decreased by half, and Ca by volume increased twice. © 2019 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2019 , 136, 47523.     

Nanolayer CrAlN/TiSiN coating designed for tribological applications

With the goal to produce a hard and tough coating intended for tribological applications, CrAlN/TiSiN nanolayer coating was prepared by alternative deposition of CrAlN and TiSiN layers. In the first part of the article, a detailed study of phase composition, microstructure, and layer structure of CrAlN/TiSiN coating is presented. In the second part, its mechanical properties, fracture and tribological behavior are compared to the nanocomposite TiSiN coating. An industrial magnetron sputtering unit was used for coating deposition. X-ray photoelectron spectroscopy, energy dispersive X-ray spectroscopy, X-ray diffraction, scanning electron microscopy, and transmission electron microscopy were used for compositional and microstructural analysis. Mechanical properties and fracture behavior were studied by instrumented indentation and focused ion beam techniques. Tribological properties were evaluated by ball-on-disk test in a linear reciprocal mode. A complex layer structure was found in the nanolayer coating. The TiSiN layers were epitaxially stabilized inside the coating which led to formation of dislocations at interfaces, to introduction of disturbances in the coating growth, and as a result, to development of fine-grained columnar microstructure. Indentation load required for the onset of fracture was twice lower for the nanolayer CrAlN/TiSiN, compared to the nanocomposite TiSiN coating. This agrees very well with their mechanical properties, with H³/E² being twice higher for the TiSiN coating. However, the nanolayer coating experienced less severe damage, which had a strong impact on tribological behavior. A magnitude of order lower wear rate and four times lower steady state friction coefficient were found for the nanolayer coating.     

Retention of gallium ions from acidic solutions by pyridine strong‐base anion exchangers

Using the batch method, the retention of Ga(III) from HCl solutions by two gel‐type pyridine strong‐base anion exchangers containing 1‐methyl‐ or 1‐butyl‐4‐vinylpyridinium chloride structural units, called S₁ and S₂ resins, respectively, was studied. The influence of the HCl and Ga(III) concentrations as well as of the contact time between the resin and the liquid phase was investigated. The parameters, which characterize the retention process, were estimated using Langmuir and Freundlich isotherms. Both resins exhibited a higher affinity for gallium ions from a 6M HCl solution. According to Langmuir isotherms, maximum retention capacities of 44.44 and 60 mg Ga(III)/g dry resin for the S₁ and S₂ resins, respectively, were obtained. Freundlich isotherms provide additional proof for a higher affinity of the S₂ resin for Ga(III) from HCl solutions. It is clear that the substituent length increase on N⁺ atoms led to an increasing affinity of the pyridine strong base anion exchangers toward Ga(III). © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 86: 3440–3444, 2002     

AI paradigms

The aim of this paper is comparative analysis of most important AI paradigms. An AI paradigm is defined as the pair composed by a concept of intelligence and a methodology in which intelligent computer systems are developed and operated. Three paradigms, the behaviourist paradigm, the agent paradigm, and the artificial life paradigm are discussed.     

Corrosion protection of aluminium in acidic chloride solutions with nontoxic inhibitors

Corrosion kinetics of 99.6% aluminium covered by a thin spontaneously formed oxide film in hydrochloric acid solution with and without the presence of substituted N-aryl pyrroles was studied using electrochemical impedance spectroscopy and quasi steady-state polarization. Measurements were performed on a rotating disc electrode in an argon-deaerated solution in the temperature range 20 to 50°C. The addition of inhibitor considerably increases overvoltage of the cathodic process (HER) and shifts Ecorr to negative potential values. The activation energy of the hydrogen evolution reaction was Ea=50±5kJmol–1 and was not affected by the presence of inhibitor. The inhibitory action occurs by -bonding between the adsorbed inhibitor molecules and the electrode surface. The electrode coverage follows the Langmuir adsorption isotherm with an adsorption equilibrium constant K=1.1–2.64×105dm3mol–1. The adsorption of organic compound prevents the adsorption of chloride ions and slow down the rate of corrosion.     

Mass transfer in aerated fermentation broths in a stirred tank reactor

The volumetric mass transfer coefficients, k_La, measured in a pilot plant (0.1 m³) and an industrial (67.5 m³) fermentor during an actual fermentation process are presented. Problems related to the estimation of the phsyical properties as well as to the correlation of experimental data and to scale up procedures are discussed. Although the scale up factor was rather high, both sets of data could be represented by single correlation. Comparison of the experimental data with several available correlations demonstrated the need for pilot plant experiments and scale up procedures, since it is almost impossible to take into account all relevant system properties.     

Formulating the template ILP consistency problem as a constraint satisfaction problem

Inductive Logic Programming (ILP) deals with the problem of finding a hypothesis covering positive examples and excluding negative examples, where both hypotheses and examples are expressed in first-order logic. In this paper we employ constraint satisfaction techniques to model and solve a problem known as template ILP consistency, which assumes that the structure of a hypothesis is known and the task is to find unification of the contained variables. In particular, we present a constraint model with index variables accompanied by a Boolean model to strengthen inference and hence improve efficiency. The efficiency of models is demonstrated experimentally.