联邦德国工业过滤布

1986年10月6～8日,联邦德国在上海举行工业过滤布研讨会。Heimbach公司介绍了该公司的各种工业用过滤布。Bayer公司重点介绍了应用于过滤布的Dralon T纤维。现将有关技术内容整理如下。 一、现代工业过滤布的发展 随着现代工业的迅速发展,工业过滤布在近二、三十年来有新的发展和突破。在五十年代末期以前,在工业过滤中都是使用传统的过滤介质,如羊毛、棉及丝的机织布。使用机织布过滤,存在不少缺陷。若要获得较好的过滤效果,那么个别气孔的面积便由于增加纱线(单丝或复丝)数目而减少,对达到最高气体流通量有所不利。结果只会增加压差。而在下一次净化之前,那些气孔面积便会因阻塞而减少。     

Improvement on dynamic elastic interpolation technique for reconstructing 3-D objects from serial cross sections [biomedical application

An improved method for automatically reconstructing a three-dimensional object from serial cross sections is presented. The method improves the dynamic elastic contour interpolation technique. There are two major improvements: (1) in the case of branching that involves concave contours, instead of pairwise interpolation between the start contour and each goal contour, the goal image is considered globally and local constraints are imposed on the forces exerting upon the vertices; and (2) it takes the continuity of high-order derivatives into consideration and incorporates the schemes of spline theory, quadratic-variation-based surface interpolation, and finite-element-based multilevel surface interpolation to create smoother surfaces of the reconstructed object. Based on the output from the preliminary processing, two alternatives, a quadratic-variation-based surface interpolation algorithm and a finite-element-based multilevel surface interpolation algorithm, can be adopted to obtain the final surface representation     

Reconstruction of two-dimensional permittivity distribution using the distorted Born iterative method

The distorted Born iterative method (DBIM) is used to solve two-dimensional inverse scattering problems, thereby providing another general method to solve the two-dimensional imaging problem when the Born and the Rytov approximations break down. Numerical simulations are performed using the DBIM and the method proposed previously by the authors (Int. J. Imaging Syst. Technol., vol.1, no.1, p.100-8, 1989) called the Born iterative method (BIM) for several cases in which the conditions for the first-order Born approximation are not satisfied. The results show that each method has its advantages; the DBIM shows faster convergence rate compared to the BIM, while the BIM is more robust to noise contamination compared to the DBIM.     

Atmospheric pressure chemical ionization mass spectrometry for analysis of lipids

Atmospheric pressure chemical ionization (APCI) mass spectrometry (MS) has proven to be a very valuable technique for analysis of lipids from a variety of classes. This instrumental method readily produces useful ions with gentle fragmentation from large neutral molecules such as triacylglycerols and carotenoids, which are often difficult to analyze using other techniques. Molecules that are easily ionized, such as phospholipids, produce molecular ions and diagnostically useful fragment ions that are complementary to those produced by methods such as electrospray ionization MS with collision-induced dissociation. The simplicity and versatility of APCI-MS make it an ideal tool for use in solving hitherto very difficult analytical problems.     

Improved activity and thermostability of Candida antarctica lipase B by DNA family shuffling

DNA family shuffling was used to create chimeric lipase B proteins with improved activity toward the hydrolysis of diethyl 3-(3',4'-dichlorophenyl)glutarate (DDG). Three homologous lipases from Candida antarctica ATCC 32657, Hyphozyma sp. CBS 648.91 and Crytococcus tsukubaensis ATCC 24555 were cloned and shuffled to generate a diverse gene library. A high-throughput screening assay was developed and used successfully to identify chimeric lipase B proteins having a 20-fold higher activity toward DDG than lipase B from C.antarctica ATCC 32657 and a 13-fold higher activity than the most active parent derived from C.tsukubaensis ATCC 24555. In addition, the stability characteristics of several highly active chimeric proteins were also improved as a result of family shuffling. For example, the half-life at 45 degrees C and melting point (T(m)) of one chimera exceeded those of lipase B from C.antarctica ATCC 32657 by 11-fold and 6.4 degrees C, respectively, which closely approached the stability characteristics of the most thermostable parent derived from Hyphozyma sp. CBS 648.91.     

Estimation of dynamically evolving ellipsoids with applications to medical imaging

The estimation of dynamically evolving ellipsoids from noisy lower-dimensional projections is examined. In particular, this work describes a model-based approach using geometric reconstruction and recursive estimation techniques to obtain a dynamic estimate of left-ventricular ejection fraction from a gated set of planar myocardial perfusion images. The proposed approach differs from current ejection fraction estimation techniques both in the imaging modality used and in the subsequent processing which yields a dynamic ejection fraction estimate. For this work, the left ventricle is modeled as a dynamically evolving three-dimensional (3-D) ellipsoid. The left-ventricular outline observed in the myocardial perfusion images is then modeled as a dynamic, two-dimensional (2-D) ellipsoid, obtained as the projection of the former 3-D ellipsoid. This data is processed in two ways: first, as a 3-D dynamic ellipsoid reconstruction problem; second, each view is considered as a 2-D dynamic ellipse estimation problem and then the 3-D ejection fraction is obtained by combining the effective 2-D ejection fractions of each view. The approximating ellipsoids are reconstructed using a Rauch-Tung-Striebel smoothing filter, which produces an ejection fraction estimate that is more robust to noise since it is based on the entire data set; in contrast, traditional ejection fraction estimates are based only on true frames of data. Further, numerical studies of the sensitivity of this approach to unknown dynamics and projection geometry are presented, providing a rational basis for specifying system parameters. This investigation includes estimation of ejection fraction from both simulated and real data.     

Polarization-insensitive electroabsorption by use of quantum well interdiffusion

A paraboliclike quantum well structure can be used to produce polarization-insensitive waveguide type modulators. We propose the use of interdiffusion of AlGaAs/GaAs quantum wells to achieve the parabolic well shape. Criteria to achieve the paraboliclike quantum wells by interdiffusion are discussed. The theoretical results indicate that interdiffused quantum wells can produce equal eigenstate spacing, polarization insensitive Stark shifts, and modulation similar to an ideal parabolic quantum well. Three procedures are also proposed to develop polarization-insensitive on and off states in paraboliclike interdiffused quantum wells. The modulation depth is compatible with that of the measured parabolic quantum wells. For diffused quantum wells one can take advantage of using an as-grown rectangular quantum well with postgrowth thermal processing. These features demonstrate that an interdiffused quantum well structure can be used to produce a polarization-insensitive electroabsorptive modulator.     

Noninvasive glucose monitoring in vivo with an optical heterodyne polarimeter

An amplitude-sensitive optical heterodyne polarimeter was set up to monitor noninvasively the aqueous glucose concentration in a rabbit's eye. A Zeeman laser in conjunction with a Glan-Thompson analyzer was used to generate an optical heterodyne signal. The amplitude of the heterodyne signal linearly related to the optical rotation angle of the aqueous glucose. The concentration of the aqueous glucose in a rabbit's eyeball was measured in vivo. There was a 30-min time delay between observations of aqueous glucose and blood glucose. The detection capability and the reproducibility of the experiment are demonstrated and discussed.     

A wavelet-based method for multiscale tomographic reconstruction

The authors represent the standard ramp filter operator of the filtered-back-projection (FBP) reconstruction in different bases composed of Haar and Daubechies compactly supported wavelets. The resulting multiscale representation of the ramp-filter matrix operator is approximately diagonal. The accuracy of this diagonal approximation becomes better as wavelets with larger numbers of vanishing moments are used. This wavelet-based representation enables the authors to formulate a multiscale tomographic reconstruction technique in which the object is reconstructed at multiple scales or resolutions. A complete reconstruction is obtained by combining the reconstructions at different scales. The authors' multiscale reconstruction technique has the same computational complexity as the FBP reconstruction method. It differs from other multiscale reconstruction techniques in that (1) the object is defined through a one-dimensional multiscale transformation of the projection domain, and (2) the authors explicitly account for noise in the projection data by calculating maximum a posteriori probability (MAP) multiscale reconstruction estimates based on a chosen fractal prior on the multiscale object coefficients. The computational complexity of this maximum a posteriori probability (MAP) solution is also the same as that of the FBP reconstruction. This result is in contrast to commonly used methods of statistical regularization, which result in computationally intensive optimization algorithms.