Membrane separation of indigenous noroviruses from sewage sludge and treated wastewater.

In this study, feasibility of membrane separation for the removal of indigenous noroviruses (NVs) is evaluated. The indigenous NV gene was never detected from ultrafiltration (UF) permeates of sewage sludge and treated wastewater. Indigenous NV gene was also not detected from permeates of sewage sludge and treated wastewater by microfiltration (MF) with a pore size of 0.1 microm (MF0.1). Even though the pore size of MF (0.1 microm) was much larger than the diameter of virus particle (approximately 30-40nm), more than 4-log10 reduction value (LRV) at maximum was achieved by membrane separation with MF0.1. NV genes were often detected from permeates of sewage sludge and treated wastewater by MF with a pore size of 0.45 microm (MF0.45), although the maximum log10 reduction values were more than 3.59 for sewage sludge and more than 2.90 for treated wastewater. It is important to verify factors determining the removal efficiency of viruses with MF membranes.     

A wafer level monitoring method for plasma-charging damage usingantenna PMOSFET test structure

A novel monitoring method for plasma-charging damage is proposed. This method performs a quick and accurate evaluation using antenna PMOSFET. It was found that not only hot-carrier (HC) lifetime but transistor parameters such as initial gate current and substrate current were changed according to the degree of plasma-charging damage. However, the present work suggests that monitoring the shift of drain current after a few seconds of HC stress is a more accurate method to indicate plasma-charging damage. The monitoring method using the present test structure is demonstrated to be useful for realizing highly reliable devices     

Growth of Potassium Titanate Fibers in Flowing N2 Gas

The length of potassium titanate fibers produced by several conventional methods averages 50 μm, with a maximum of 100 μm. Extremely long fibers (most >1000 μm long) were obtained by calcination in N₂ gas flowing at 5.2×10^-4 m/s.     

Molecular size-dependent leakage of intracellular molecules from frog skeletal muscle fibers permeabilized with beta-escin

The permeability of beta-escin-treated cell membrane was characterized in terms of the permeant molecular size, by monitoring the leak of cytoplasmic molecules in frog skeletal muscle fibers. With a low concentration of beta-escin (5 microM), most of the cellular ATP was lost within 30-40 min (as revealed by rigor force generation), whereas a fluorescence-labeled dextran injected into the cytoplasm (approximately 10 kDa) and cytoplasmic proteins (14-80 kDa) slowly leaked out of the cell. A high concentration of beta-escin (50-100 microM) accelerated the leak of large molecules. Therefore, low concentrations of beta-escin may be used as a means of permeabilizing the cell membrane to relatively small molecules, while retaining a major fraction of the cellular macromolecules.     

Progressive bronchial obstruction during the acute stage of respiratory tract infection in asthmatic children

To study the time-course of infectious asthma, we retrospectively examined FEV1 from 5 days before to 10 days after the onset of illness in 31 asthmatic children (20 boys and 11 girls), aged 8 to 12 years. Infections were confirmed by a rise of at least fourfold in serum compliment fixation titers (respiratory syncytial virus, adenovirus, and Mycoplasma pneumoniae) and hemoagglutination inhibition titers (parainfluenza virus types 1, 2, and 3). All the patients had 20 percent or more fall in FEV1 from baseline value during acute phase, but were clinically tolerable and required minimum or no bronchodilators. Regardless of infectious agent, FEV1 began to fall on the first disease day or the previous day, and deteriorate for the first few days. Mean(SD) maximum fall in FEV1 ranged from 39(12) percent to 45(20) percent. Thereafter, FEV1 began to improve and returned to the preillness level by the seventh to tenth day. These results suggest that progressive bronchial obstruction may be inevitable during the acute stage of any infectious asthma.     

Three-dimensional pin power reconstruction for the axially heterogeneous region in BWR

A three-dimensional pin power reconstruction method was proposed and verified by applying to the axially heterogeneous region problem of the BWR core calculation. Because the production assembly calculation has been carried out by two-dimensional deterministic calculation methods like current coupling collision probability or the method of characteristics, it has been difficult to predict the detailed three-dimensional heterogeneous pin power distribution of the axially heterogeneous region. Consequently, only radial intranodal homogeneous power distributions have been considered, and axial intranodal homogeneous power distributions have not been considered in the estimation of linear-heat-generation-ratio at common BWR core calculations.     

Prediction of spectral reflectance factor distribution of automotive paint finishes

It is necessary to determine the accurate reflectance of painted surfaces for the review of paint finishes by computer graphics (CG) before actual painting of the exterior color of automobiles, and for quality control during production and inspection processes. We have optimized a method for measuring reflectance by using a statistical technique. We have found that the reflectance of a painted surface is best measured at an incident angle of 60° and at five aspecular angles of 10°, 18°, 28°, 40°, and 90°. Our method makes it possible to accurately reproduce reflection characteristics of paint finishes containing special flake pigments, such as pearl mica. Also it was proved that our method can apply not only to solid and metallic coatings but to all painted surfaces. © 2005 Wiley Periodicals, Inc. Col Res Appl, 30, 275–282, 2005; Published online in Wiley InterScience (www.interscience.wiley.com). DOI 10.1002/col.20125     

Hydrogen absorption by Pd-coated ZrNi prepared by using Barrel-Sputtering System

To improve the durability of hydrogen storage materials against surface poisoning by impurity gases, effectiveness of Pd-coating layer prepared by using a Barrel-Sputtering System was examined for ZrNi powder. The effectiveness of Pd-coating was evaluated by activation temperature, at which Pd/ZrNi poisoned by air could be activated to absorb hydrogen. Characterization of Pd-coated ZrNi (denoted as Pd/ZrNi) by scanning electron microscopy, electron probe microanalysis and X-ray diffraction showed that a uniform Pd-coating layer was formed with the barrel-sputtering system. It was found that the poisoned Pd/ZrNi sample could be activated even at 423 K to absorb hydrogen at room temperature. This exhibits remarkable contrast to bare ZrNi, which could be only activated appreciably above 1073 K. It is concluded that the Pd-coating by barrel sputtering is quite effective to avoid the effect of surface poisoning of powdery hydrogen storage materials. However, the activation at excessively high temperature resulted in the loss of high activity to absorb hydrogen. It was concluded that this phenomenon was associated with reactions between Pd and ZrNi to form PdZr and other byproducts.     

X gene and precore region mutations in the hepatitis B virus genome in persons positive for antibody to hepatitis B e antigen: comparison between asymptomatic "healthy" carriers and patients with severe chronic active hepatitis

Hepatitis B virus (HBV) carriers with antibody to hepatitis e antigen comprise asymptomatic carriers (ASCs), who have low replication levels of HBV, and patients with chronic active hepatitis (CAH), who have high levels of viral replication. To investigate whether defects in the X protein might be responsible for this difference in the level of viral replication, nucleotide sequences of X and precore gene regions in serum HBV were analyzed in 19 ASCs and 9 CAH patients. All patients had a point mutation creating a stop codon in the precore region. Seventeen ASCs (87.3%) had identical mutations consisting of 4 noncontiguous 1-bp deletions or an 8-bp deletion, both of which truncate the normal X protein, whereas no CAH patient had an X gene mutation (P < .001). Thus, deletion of the X protein might be responsible for the low levels of viral replication in ASCs.     

Hydroliquefaction of low-sulfur coals using iron carbonyl complexes—Sulfur as catalysts

Hydroliquefaction of low-sulfur Australian coals (Wandoan and Yallourn) was studied using iron carbonyl complexes as catalyst. The addition of Fe(CO)₅ (2.8 wt% Fe of coal) increased coal conversion from 48.6 to 85.2% for Wandoan coal, and from 36.7 to 69.7% for Yallourn coal in 1-methylnaphthalene at 425°C under an initial hydrogen pressure of 50 kg cm^?2. When molecular sulfur was added to iron carbonyls (Fe(CO)₅, Fe₂(CO)₉ and Fe₃(CO)₁₂), higher coal converions ( > 92%) and higher oil yields (>46%) were obtained, along with an increase in the amount of hydrogen transferred to coal from the gas phase (0.2 to 2.8%, d.a.f. coal basis). In the liquefaction studies using a hydrogen donor solvent, tetralin, Fe(CO)₅S catalyst increased the amount of hydrogen absorbed from the gaseous phase and decreased the amount of naphthalene dehydrogenated from tetralin. The direct hydrogen transfer reaction from molecular hydrogen to coal fragment radicals seems to be a major reaction pathway. Organic sulfur compounds, dimethyldisulfide and benzothiophene, and inorganic FeS₂ and NiS were found to be good sulfur sources to Fe(CO)₅. From X-ray diffraction analyses of liquefaction residues, it is concluded that Fe(CO)₅ was converted into pyrrhotite (Fe_1?xS) when sulfur was present, but into Fe₃O₄ in the absence of sulfur.