溶剂浸渍树脂的萃取分离性能研究

介绍了溶剂浸渍树脂的制备及性能,阐述了溶剂浸渍树脂在产物提纯和废水处理等分离过程中的应用,并对使用溶剂浸渍树脂处理含酚废水进行了初步研究.     

1270轧机弹性曲线的回归及参数估计

首先介绍了轧机弹性曲线的基础知识及 1 2 70轧机AGC系统的基本结构 ,然后论述了数据采集的方法 ,最后根据最小二乘法得到轧机弹性曲线的回归模型及刚度系数的实验结果。     

基体碳对C/CF/Cu复合材料的影响

采用树脂碳化和碳气相沉积相结合的方法制备了碳/碳纤维(C/CF)先驱丝,用压力浸渗凝固成型方法制备了碳/碳纤维/铜(C/CF/Cu)复合材料,借助于扫描电镜下复合材料界面和相分布观察以及显微硬度和滑动摩擦磨损测试,探讨了基体碳(树脂碳化碳和沉积碳)对C/CF/Cu复合材料成型、显微硬度及摩擦磨损的影响.结果表明,碳化和碳气相沉积处理的C/CF先驱丝相对致密并阻碍铜液的压力浸渗成型,但该先驱丝硬度高于碳化处理的C/CF先驱丝.碳化和碳气相沉积处理的C/CF/Cu复合材料滑动摩擦磨损耐磨性高于纯铜,而且滑动摩擦系数也高于纯铜.C/CF/Cu复合材料是一种具有摩阻功能的复合材料.     

胺对镍系催化了二烯聚合规律的影响

以二乙胺为例研究了胺对Ｎｉ（ｎａｐｈ）２－Ａｌ（－Ｂｕ）３－ＢＦ３·ＯＥｔ２＋ｎ—Ｃ８Ｈ１７ＯＨ（简称Ｎｉ－Ａｌ－Ｂ＋ＲＯＨ）和Ｎｉ（ｎａｐｈ）２－Ａｌ（ｉ－Ｂｕ）３－ＢＦ３·ＯＥｔ２＋ＣＨ３ＣＯＯＣ４Ｈ９（简称Ｎｉ—Ａｌ—Ｂ＋ＢＡ）两体系聚合活性和聚合物分子量的影响，并与Ｎｉ—Ａｌ—Ｂ体系进行了对比．考察了通常条件下肢的允许含量，讨论了有胺存在时Ｎｉ／Ｂｄ、Ａｌ／Ｎｉ、Ａｌ／Ｂ摩尔比的变化对聚合规律的影响。结果表明：胺的含量高于２０ｐｐｍ时将使聚合活性和分子量降低，提高催化剂用量可以抑制胺的不利影响。     

清液体系中高性能T型沸石分子筛膜的合成

由摩尔组成为SiO2:Al2O3:Na2O:K2O:H2O=1:0.015:0.25:0.08:25的澄清溶液,在预涂晶种的管状莫来石支撑体上水热合成T型沸石分子筛膜.在高于100℃清液体系中合成出了高性能T型沸石分子筛膜.用X射线衍射(X-ray diffraction,XRD)仪和扫描电子显微镜(scanning electron microscope,SEM)对150℃下合成35 h的分子筛膜进行了表征.XRD谱表明:T型沸石分子筛成功地生长在预涂晶种的支撑体上.支撑体的外表面覆盖着20 μm厚有取向的晶体层.从SEM照片判断,起到分离作用的是生长致密的中间层,而不是表层.在150℃下制备的膜,对水/乙醇、水/异丙醇混合物具有高渗透汽化分离性能.优异的渗透汽化性能归因于在涂有晶种的多孔支撑体上生长了一层高结晶度且缺陷较少的T型沸石分子筛晶体层.     

Enhanced utilization bound of Rate-Monotonic scheduling in Controller Area Networks

When priorities to message streams are assigned using Rate Monotonic (RM) for a Controller Area Network (CAN), the utilization bound is known to be about 25% for CAN 2.0A and 29% for CAN 2.0B. In this letter, we present a higher utilization bound than the existing ones with a reasonable constraint. The new utilization bounds are approximately 34% for CAN 2.0A and 41% for CAN 2.0B if no single message stream's utilization exceeds 46% or 27% of the total utilization for CAN 2.0A or CAN 2.0B, respectively.     

3—乙酰基—5—溴 酚酮的合成

2-乙酰基-7-甲氨基酮1与溴反应得2-乙酰基-7-甲氨基-4-溴酮2。2与氢氧化钠反应得3-乙酰基-5-溴酚酮3。化合物2和3是两种新化合物,其结构已经红外光谱、核磁共振谱及元素分析证实。     

Electrical behavior of carbon black-filled polymer composites: Effect of interaction between filler and matrix

The effect of interaction between carbon black and polymer on electrical behavior was studied using the ESR method. The polymer matrices used were HDPE, LDPE, and ethylene/vinyl acetate (EVA). Two kinds of carbon blacks (CB), high structure CSF-III and low structure FEF, were used as a conductive filler. Compared to that of the HDPE/FEF compound, the positive temperature coefficient (PTC) intensity is lower and electrical reproducibility is worse for the HDPE/CSF-III compound; however, it can be improved significantly by radiation cross-linking. On the other hand, the cross-linking has no practical effect on the PTC intensity of the LDPE/CSF-III compound while it can be achieved by mixing the compound for a longer time. The great PTC intensity was obtained in the HDPE/EVA/CSF-III compound, and it is greater than that of HDPE/CSF-III or EVA/CSF-III. We explain these results using the concept of interaction between the filler and matrix. The absorption of the polymer on the carbon black surface may be physical or chemical; the latter is caused by the free-radical reaction between the polymer and carbon black, and it can occur during the radiation or preparation process of the compound. These “bound polymers” are essentially important for materials to have a great PTC intensity and good reproducibility. © 1994 John Wiley & Sons, Inc.     

Morlet 小波在地表物候遥感识别中尺度的选取与应用

地表物候是人类了解地球生态系统的必要参数,也是动植物保护、农耕等活动的重要依据。使用遥感数据进行地表物候提取为大尺度的地表物候变化监测提供了一种有效途径。研究发现目前应用最广泛的非对称性高斯函数拟合法和双 Logistic 函数拟合法存在一定的缺陷,尤其是在提取 NDVI 峰值谷值和物候周期不明显区域 (如干旱地区、沙地) 的物候参数时存在严重的误差,而 morlet 小波在分析地表年际变化的周期特征方面表现良好。本文使用 morlet 小波对青海湖流域 2003-2014 年的 MODIS 数据进行分析,得到地表物候在该时间段内的年度变化与趋势,进行不同区域、不同时间的差异性分析,发现青海湖流域的地表物候期整体都略有提前,但生长季的长度呈延长趋势,认为青海湖流域的地表物候整体上响应全球变暖的趋势。中部地区的生长季长度大于高海拔、高纬度区域和沙地区域,认为青海湖流域的中部地区是最适合动植物生长、活动的范围。