Electrochemical mass transfer between an impinging jet and a rotating disk in a confined system

This paper presents the mass transfer results from an impinging liquid jet to a rotating disk. The mass transfer coefficients were measured using the electrochemical limiting diffusion current technique (ELDCT). Rotational Reynolds number (Re_r) in the range of 3.4 × 10⁴–1.2 × 10⁵, jet Reynolds number (Re_j) 1.7 × 10⁴–5.3 × 10⁴ and non-dimensional jet-to-disk spacing (H/d) 2–8 were taken into consideration as parameters. It was found that the jet impingement resulted in a substantial enhancement in the mass transfer compared to the case of the rotating disk without jet.     

The impact of micro‐ and macroergonomics considerations on appropriate technology transfer decisions in developing countries: The case of Turkey

The research presented in this paper aims to support the decision process of appropriate technology transfer to industrially developing countries by improving a broader understanding of relationships between the key micro‐ and macroergonomics factors and the technology alternatives. The methodology involves knowledge acquisition, identifying and categorizing a holistic set of key criteria about technology transfer with respect to ergonomics. This work attempts briefly to identify factors affecting the success of technology transfer in order to reduce the potential of incompatibilities with respect to micro‐ and macroergonomics and to optimize the decision process of managers. The objective of the decision model, based on the analytic hierarchy process (AHP), determines the global priority weights for different technology alternatives and examines the critical factors and benefits, which affect the appropriateness of technology transfer. © 2007 Wiley Periodicals, Inc. Hum Factors Man 17: 1–19, 2007.     

Locational analysis for regionalization of Turkish Red Crescent blood services

After a series of earthquakes in 1999, Turkish Red Crescent (TRC) has engaged in a restructuring for all of its activities, including the blood services. Our study on the blood management system had been started as part of this initiative to restructure the blood services and improve both their effectiveness and efficiency. In the current system of TRC, not much consideration has been given to how the locational decisions affect the performance of blood centers, stations and mobile units. In recent years, however, there has been much discussion regarding the regionalization of the blood management system in Turkey. In this study, we develop several mathematical models to solve the location–allocation decision problems in regionalization of blood services. We report our computational results, obtained by using real data, for TRC blood services.     

Prediction of software vulnerability based deep symbiotic genetic algorithms: Phenotyping of dominant-features

The detection of software vulnerabilities is considered a vital problem in the software security area for a long time. Nowadays, it is challenging to manage software security due to its increased complexity and diversity. So, vulnerability detection applications play a significant part in software development and maintenance. The ability of the forecasting techniques in vulnerability detection is still weak. Thus, one of the efficient defining features methods that have been used to determine the software vulnerabilities is the metaheuristic optimization methods. This paper proposes a novel software vulnerability prediction model based on using a deep learning method and SYMbiotic Genetic algorithm. We are first to apply Diploid Genetic algorithms with deep learning networks on software vulnerability prediction to the best of our knowledge. In this proposed method, a deep SYMbiotic-based genetic algorithm model (DNN-SYMbiotic GAs) is used by learning the phenotyping of dominant-features for software vulnerability prediction problems. The proposed method aimed at increasing the detection abilities of vulnerability patterns with vulnerable components in the software. Comprehensive experiments are conducted on several benchmark datasets; these datasets are taken from Drupal, Moodle, and PHPMyAdmin projects. The obtained results revealed that the proposed method (DNN-SYMbiotic GAs) enhanced vulnerability prediction, which reflects improving software quality prediction.

     

Poly(Acrylamide-Sepiolite) Composite Hydrogels: Preparation, Swelling and Dye Adsorption Properties

Summary Polymer-clay hydrogel composite was prepared on the basis of polyacrylamide (PAAm) gel containing the clay mineral sepiolite. The properties of swelling and dye adsorption of poly(acrylamide-sepiolite) (AAm/Sep) composite hydrogel were investigated. The parameters of swelling and diffusion in water and dye solutions were calculated for the AAm and AAm/Sep hydrogels. It was found that the equilibrium swelling degree of obtained composite higher than that of AAm gel. Spectroscopic analysis of composite and composite-dye systems was done with FT-IR method. Adsorption of monovalent cationic dyes such as Basic Blue 12 (BB-12) Basic Blue 9 (BB-9), and Basic Violet 1 (BV-1), was studied on the composite. In the adsorption experiments, S (Sigmoidal) type for composite gel adsorption isotherms in the Giles classification system was found. Adsorption studies indicated that the amounts of adsorbed dyes on the AAm/Sep composite hydrogel were increased with following order; BB-12 > BB-9 > BV-1. The composite hydrogel may be considered as good candidate for environmental application to retain more water and dyes.     

Corrosion inhibition of stainless steel by polyaniline,poly(2-chloroaniline), and poly(aniline-co-2-chloroaniline) in HCl

Polyaniline (PANi), poly(2-chloroaniline) (PClANi), and poly(aniline-co-2-chloroaniline) (co-PClANi) films were synthesized by electrochemical deposition on 304-stainless steel (SS) from an acetonitrile solution. The structural properties of these polymer films were characterized by spectroscopic (FTIR and UV–vis) and electrochemical (cyclic voltammetry) methods. Open circuit potential–time (E_ocp–time) curves, potentiodynamic polarization, and electrochemical impedance (EIS) measurements showed that these films have significant protective performance against corrosion of SS in 0.5 M HCl solution. It was found that co-PClANi film has acted as a passivator as well as barrier for cathodic reduction reaction in a similar manner as PANi film. However, PClANi film has behaved only as barrier for corrosion protection of SS in 0.5 M HCl.     

Modeling and solving mixed-model assembly line balancing problem with setups. Part I: A mixed integer linear programming model

This paper is the first one of the two papers entitled “modeling and solving mixed-model assembly line balancing problem with setups”, which has the aim of developing the mathematical programming formulation of the problem and solving it with a hybrid meta-heuristic approach. In this current part, a mixed-integer linear mathematical programming (MILP) model for mixed-model assembly line balancing problem with setups is developed. The proposed MILP model considers some particular features of the real world problems such as parallel workstations, zoning constraints, and sequence dependent setup times between tasks, which is an actual framework in assembly line balancing problems. The main endeavor of Part-I is to formulate the sequence dependent setup times between tasks in type-I mixed-model assembly line balancing problem. The proposed model considers the setups between the tasks of the same model and the setups because of the model switches in any workstation. The capability of our MILP is tested through a set of computational experiments. Part-II tackles the problem with a multiple colony hybrid bees algorithm. A set of computational experiments is also carried out for the proposed approach in Part-II.     

Activities of MFI-Supported Rhenium Catalysts for the Aromatization of Methane: Effect of Cationic Form of the Inorganic Carrier

MFI type inorganic carrier was used in two different cationic forms, hydrogen and calcium respectively. MFI-supported molybdenum and rhenium catalysts were prepared. The activities of the catalysts were compared for the aromatization reaction of methane. Higher activity values were attained with the catalysts supported on HZSM-5. Aromatics were also observed with the catalysts supported on CaZSM-5, despite their deficiency in acid sites. Highly dispersed rhenium is expected to be formed with the use of the inorganic carrier in calcium form. On the other hand, lower reaction rates were observed with rhenium supported on CaZSM-5, in spite of the improved dispersion of the active rhenium species on this catalyst. This was interpreted in terms of the critical role of the acid sites in the conversion of methane to aromatics, compared to the improved dispersion of the active metal.     

AHP and multichoice goal programming integration for course planning

Course planning is one of the important problems in the education systems of universities. The processes cannot continue efficiently without planning, and various interruptions can appear in the system. This way decisions concerning which courses, when, how, and for what purposes should be answered by considering the available resources and stakeholders’ preferences. Besides, universities aiming to be in the European Higher Education Area (EHEA) have to adapt their systems to the Bologna process in order to create a lifelong student‐centered, learning‐oriented area based on quality assurance. In this study, an integrated approach based on the analytic hierarchy process (AHP) and multichoice goal programming (MCGP) model was proposed to construct an efficient course plan following the Bologna process. The proposed approach was applied in an industrial engineering department.