Maximum power density for an endoreversible carnot heat engine

An analysis using maximum power-density criteria has been carried out for an endoreversible Carnot heat engine. The results have been compared with known results on maximum power analysis. The design parameters at maximum power density lead to smaller and more efficient endoreversible Carnot heat engines than those working at maximum power output.     

Degradation of 4-chloro-2-methylphenol in aqueous solution by electro-Fenton and photoelectro-Fenton processes

Degradation of 4-chloro-2-methylphenol (PCOC), a refractory toxic chemical emitted to the environment from the industrial production of phenoxy herbicides was studied in aqueous solution. Electro-Fenton and photoelectro-Fenton processes were used as the degradation methods. H₂O₂, produced by the reduction of oxygen at carbon cathode reacted with dissolved metal ions to form hydroxyl radicals, which in turn reacted with PCOC sequentially to degrade the aromatic ring. The effects of using different [Fe²⁺]/[PCOC]₀ and the effect of replacing Fe²⁺ by Mn²⁺ ion have been examined. It was found that degradation rate was increased with increasing [Fe²⁺]/[PCOC]₀ ratio from 2 to 4. However, the total charge utilized during the treatment was also increased. The efficiency of PCOC degradation was observed to be higher when Mn²⁺ was used as the catalyst. The mineralization of aqueous solutions of PCOC, withdrawn from the reactor at certain time interval, has been followed by total organic carbon (TOC) decay and dechlorination. A fast and complete degradation of the aromatic ring was achieved in photoelectro-Fenton system. 41.7% TOC decay and complete dechlorination were observed by consuming only 141.4 C electrical charge during a 300 min photoelectron-Fenton treatment. In the case of electro-Fenton system, 280.7 C electrical charge was consumed during 450 min of electrolysis to attain a similar degradation of PCOC. 14.9% TOC removal and 89.3% dechlorination have been obtained in this system under the applied conditions.     

Antibody purification by concanavalin A affinity chromatography

Concanavalin A (Con A) immobilized poly(2‐hydroxyethyl methacrylate) (PHEMA) beads in a spherical form (100–150 μm in diameter) were used for the affinity chromatography purification of human immunoglobulin G (IgG) from aqueous solutions and human plasma. PHEMA adsorbents were prepared by suspension polymerization. Bioligand Con A was then immobilized by covalent binding onto PHEMA beads. The maximum IgG adsorption on the PHEMA/Con A beads was observed at pH 6.0. The nonspecific IgG adsorption onto the plain PHEMA adsorbents was very low (ca. 0.17 mg/g). Higher adsorption values (up to 54.3 mg/g) were obtained when the PHEMA/Con A beads were used from aqueous solutions. A higher adsorption capacity was observed for human plasma (up to 69.4 mg/g) with a purity of 82.5%. The adsorption capacities of other blood proteins were 2.0 mg/g for fibrinogen and 4.2 mg/g for albumin. The total protein adsorption was determined to be 76.0 mg/g. IgG molecules could be repeatedly adsorbed and desorbed with the PHEMA/Con A beads without noticeable loss in the IgG adsorption capacity. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci 97: 1202–1208, 2005     

Adaptive,incentive and scalable dynamic tree overlay for P2P live video streaming

In this paper, we propose a new multicast tree framework to be used in peer-to-peer (P2P) live video streaming systems. The proposed system, adapts the tree links under high peer churn and runs in a totally distributed manner. In order to provide this dynamism and seamless streaming at the same time, we propose a cross layer design involving scalable video codec, backup parents and hierarchical clusters. The performance of the system is measured in real world environment PlanetLab that has nodes distributed all over the world. The experiments show that the proposed system provides high quality of experience (QoE) in terms of Peak Signal to Noise Ratio (PSNR), playback delay and duration of pauses. The proposed system also provides incentive mechanism to its users.     

Fair referee assignments for professional football leagues

Assignment of referees to football games is an important problem faced in professional football leagues. Despite its importance, the problem has received limited academic attention. This paper presents a model and analysis of the problem for fair referee assignments, and develops a constructive heuristic and a local search procedure for its solution. Results from an extensive computational study show that the methods are effective in solving the problem in a second of computation time and yielding an excellent solution quality.     

Prosthetic Hand Finger Control Using Fuzzy Sliding Modes

In order to improve the life quality of amputees, providing approximate manipulation ability of a human hand to that of a prosthetic hand is considered by many researchers. In this study, a biomechanical model of the index finger of the human hand is developed based on the human anatomy. Since the activation of finger bones are carried out by tendons, a tendon configuration of the index finger is introduced and used in the model to imitate the human hand characteristics and functionality. Then, fuzzy sliding mode control where the slope of the sliding surface is tuned by a fuzzy logic unit is proposed and applied to have the finger model to follow a certain trajectory. The trajectory of the finger model, which mimics the motion characteristics of the human hand, is pre-determined from the camera images of a real hand during closing and opening motion. Also, in order to check the robust behaviour of the controller, an unexpected joint friction is induced on the prosthetic finger on its way. Finally, the resultant prosthetic finger motion and the tendon forces produced are given and results are discussed.     

Throughput performance of automated storage/retrieval systems under stochastic demand

In this paper we are concerned with the throughput performance of an Automated Storage/Retrieval (AS/R) system under stochastic demand, i.e., the case where storage and retrieval requests arrive randomly. Although AS/R systems have been the subject of extensive research, their performance under stochastic demand remains relatively unexplored. In fact, with random storage and retrieval requests, the primary tool for AS/R system analysis has been simulation. Assuming a particular dwell point strategy for the storage/retrieval machine, in this paper we derive closed-form analytical results to evaluate the performance of an AS/R system under stochastic demand and determine whether or not it meets throughput. Although the results are derived for a given system, they can also be used in the design or evaluation of new/proposed systems.     

Fuzzy logic control of vehicle suspensions with dry friction nonlinearity

We design and investigate the performance of fuzzy logic-controlled (FLC) active suspensions on a nonlinear vehicle model with four degrees of freedom, without causing any degeneration in suspension working limits. Force actuators were mounted parallel to the suspensions. In this new approach, linear combinations of the vertical velocities of the suspension ends and accelerations of the points of connection of the suspension to the body have been used as input variables. The study clearly demonstrates the effectiveness of the fuzzy logic controller for active suspension systems. Suspension working space degeneration is the most important problem in various applications. Decreasing the amplitudes of vehicle body vibrations improves ride comfort. Body bounce and pitch motion of the vehicle are presented both in time domain when travelling over a ramp-step road profile and in frequency domain. The results are compared with those of uncontrolled systems. At the end of this study, the performance and the advantage of the suggested approach and the improvement in ride comfort are discussed.