Antenna-array pattern nulling using a differential evolution algorithm

A new method based on the differential evolution (DE) algorithm is proposed for antenna-array pattern synthesis with prescribed nulls. The array excitation amplitudes are the only controlling parameters, and the objectives are to synthesize array patterns with nulls imposed on directions of interferences while keeping the sidelobe levels (SLLs) below prescribed levels. Many factors such as the excitation dynamic range ratio, null depth level, null width, and SLLs are taken into account in the synthesis. Simulation results of several typical problems are compared with published results to illustrate the effectiveness of the proposed method. © 2003 Wiley Periodicals, Inc. Int J RF and Microwave CAE 14: 57–63, 2004.     

Characterization of charge trapping in submicrometer NMOSFET's bygate capacitance measurements

Trapping of net positive charge at low gate stress voltage, and of net negative charge at high gate stress voltage, is observed through changes in the gate-to-drain capacitance of the stressed junction. These observations can be explained in terms of electron trapping, hole trapping, and generation of acceptor-like interface states located in the upper half of the bandgap. Channel shortening is also observed and found to exhibit a logarithmic time dependence     

A Customized Radiation Sensor for Ionization Collection

The measurement of absorbed doses is fundamental to radiation biology and oncology. A customized parallel plate radiation sensor was designed and fabricated as a precursor to investigating novel materials, such as carbon nanotubes, as a substitute for conventional metallic conducting plates or active volume medium. This sensor contains two thick and large-area electrodes that provide the sensor with a good signal-to-noise ratio. The 6 MV and 15 MV photon beams produced by a Varian Clinac 21 EX medical linear accelerator were used in the experiments. The linear accelerator was calibrated such that 1 monitor unit (MU) produces 1 cGy of dose in water with depth of 5 cm for a calibration geometry of source-to-axis distance equal to 100 cm and 10times10 cm² field size at the point of measurement. Ionization measurements were performed by varying the bias voltages, electrode separations, exposures, and angles of the incident beam to characterize the sensor. Signal saturation characteristics of the sensor with different electrode separations and exposures were investigated. This sensor displayed excellent linear response to exposure up to 600 MU. An analytical modeling using the pencil beam model and simulations based on device configuration were given to explain the results. In oblique incident beam experiments, the prototype sensor showed an accurate response compared to simulation results for a small field size of 1times1 cm². The sensor was tested to be suitable in the study of ionization collection efficiencies for different materials     

The PBD-Closure of Constant-Composition Codes

We show an interesting pairwise balanced design (PBD)-closure result for the set of lengths of constant-composition codes whose distance and size meet certain conditions. A consequence of this PBD-closure result is that the size of optimal constant-composition codes can be determined for infinite families of parameter sets from just a single example of an optimal code. As an application, the sizes of several infinite families of optimal constant-composition codes are derived. In particular, the problem of determining the size of optimal constant-composition codes having distance four and weight three is solved for all lengths sufficiently large. This problem was previously unresolved for odd lengths, except for lengths seven and eleven.     

Effects of nitric oxide annealing of thermally grown silicondioxide characteristics

The effects of nitric oxide (NO) annealing on conventional thermal oxides are reported in this letter. The oxide thickness increase, resulting from NO annealing, is found to be only a few angstroms (<0.5 nm) and independent on the initial oxide thickness. Furthermore, both the electrical and physical characteristics are improved. This technique is expected to achieve sub-5 nm high quality ultrathin dielectric films for the applications in EEPROM's and ULSI     

The effects of long-term VDT usage on the nature and incidence of asthenopic symptoms

An opportunity arose in 1985 to become involved in a transition of working practice from hard copy to VDT. Over a two-year period, 161 VDT users and 65 control subjects in the same office environment were regularly and routinely examined for symptoms of asthenopia. The analysis of data shows that there are no significant differences in type, number and frequency of the work-related symptoms between VDT users and non-VDT users. It appears that reporting of symptoms within the group may be random, although certain symptoms do appear more frequently than others. Additionally, it appears that there is a significant difference between male and female users in the frequency of symptom reporting.     

Examining the Effectiveness of Gamification in Human Computation

Within the human computation paradigm, gamification is increasingly gaining interest. This is because an enjoyable experience generated by game features can be a powerful approach to attract participants. Although potentially useful, little research has been conducted into understanding the effectiveness of gamification in human computation. In this experimental study, we operationalized effectiveness as perceived engagement and user acceptance and examined it by comparing the performance of a gamified human computation system against a non-gamified version. We also investigate the determinants of acceptance and how their effects differ between these two systems. Analysis of our data found that participants experienced more engagement and showed higher behavioral intentions toward the gamified system. Moreover, perceived output quality and perceived engagement were significant determinants of acceptance of the gamified system. In contrast, determinants for acceptance of the non-gamified system were perceived output quality and perceived usability.     

Effect of coupling agent content on properties of composites made from polylactic acid and chrysanthemum waste

Chrysanthemum flower is among one of the highly sought after and widely planted flower crops, in particular for cultural and religious ceremonies. However, the chrysanthemum stem and stalk have little value and usually discard as by‐product waste from floristry. The objective of this research is to investigate the potential value of utilizing chrysanthemum stem and stalk as reinforcing fillers for thermoplastic composites. In this study, 2‐mm thick composite sheet containing predefined formulations of polylactic acid (PLA), chrysanthemum waste filler (CWF) ranging from 15 to 60 phr, and maleated polyethylene (MAPE) coupling agent up to 5 phr were prepared with the aid of Haake internal mixer and compression molding. The effect of MAPE loading on tensile, thermal, and morphological properties of PLA/CWF composites was investigated. The findings revealed that PLA/CWF composite attained improved tensile modulus compared to the neat PLA, and the tensile modulus increases with higher concentration of CWF. However, both tensile strength and elongation at break reduces with increase loading of CWF. Overall, PLA/CWF composites with MAPE shows better performance compared to those without MAPE, where an optimum strength of 21.8 MPa can be achieved with 60 phr CW and 3 phr MAPE. The measured tensile strength is comparable to alternatives natural fiber thermoplastic composites demonstrating its potential to be used in non‐structurally demanding application. J. VINYL ADDIT. TECHNOL., 26:10–16, 2020. © 2019 Society of Plastics Engineers     

Evaluation of the surface photovoltage method of minority-carrier diffusion-length measurement

The surface photovoltage (SPV) method of semiconductor minority carrier diffusion length measurement is simulated numerically by solving the semiconductor equations under monochromatic illumination. It is shown that the extracted diffusion length is dependent on the SPV level and the initial surface potential. This dependence arises because of carrier generation in the surface space charge region. For the p-type silicon investigated, the extracted diffusion length is found to be within 10% of the actual value even when the assumption of low level injection is violated.     

Ergonomics issues in national identity card for homeland security

Ever since the 9/11 terrorist attack, many countries are considering the use of smart national identity card (SNIC) which has the ability to identify terrorists due to its biometric verification function. However, there are many ergonomics issues in the use of SNIC, e.g. card credibility. This research presents a case study survey of Malaysian users. Although most citizens (>96%) own MyKad (Malaysia SNIC), many do not carry it around and use its applications. This defeats one of its main purposes, i.e. combating terrorism. Thus, the research investigates ergonomics issues affecting the citizens’ Intention to Use (ITU) MyKad for homeland security by using an extended technology acceptance model. Five hundred questionnaires were collected and analysed using structural equation modelling. Results show that perceived credibility and performance expectancy are the key issues. The findings provide many countries with insights into methods of addressing ergonomics issues and increasing adoption of SNIC for homeland security.