Flocculation morphology: effect of particulate shape and coagulant species on flocculation.

Flocculation morphology is a new concept that investigates the morphological characteristics of colloidal particles and coagulants in water during the flocculation process, and the influence that these characteristics have on flocculation process efficiency. This paper is a summary of advances in research on this topic over several years. Morphological characteristics of colloids in natural waters and different kinds of hydrolysed coagulants are investigated, and their effect on colloid stability, flocculation kinetics and efficiency is analysed. It is confirmed that the traditional theory has some deviations in coagulation of nonspherical particles, and these deviations are revised by the flocculation morphology model. Flocculation morphology can not only promote research about flocculation theory, but also instruct the production, application and flocculation control. It can be foreseen that more progress will be made in research and application of flocculation morphology in the near future.     

BYJ型防喷脱接器的设计与应用

本文介绍了BYJ型防喷脱接器的结构和工作原理。它既有抽油杆与大泵活塞脱接功能,又能实现不压井作业施工,是大型抽油泵理想的配套工具。现场应用表明,该防喷脱接器对接成功率较高,并实现了大泵井不压井施工。     

胃动力信息采集与分析系统设计

本文设计了一套提取胃电和胃阻抗信号的胃动力信息采集与分析系统，该系统由采集系统和分析系统两部分构成。前者以单片机（ADuC834）为核心部件，实现了胃电和生物阻抗信号的同步采集和数据传输。后者对提取的阻抗信号和胃电信号运用小波多分辨分析处理，利用小波变换将胃阻抗信号从呼吸和血流信号中分离。系统可以应用于分析功能性消化不良患者胃动力的电过程和机械过程。     

Study on phase behavior–impact strength relationship of unsaturated polyester/polyurethane hybrid polymer network

The phase behavior of a hybrid polymer network (HPN) composed of poly[(propylene glycol maleate)-co-(propylene glycol phthalate)] crosslinked with styrene and polyester–urethane crosslinked with methylene-bis-ortho-chloroaniline was examined. The correlation between phase separation and impact strength of the HPNs is discussed. The composition of HPNs has an effect on their properties.     

尿基复合肥生产技术的改进

通过分析尿基复合肥生产过程中出现的问题，并相应提出技术改进措施，优化操作，对复合肥产量的提高和产品质量的控制都取得了明显的效果。     

Direct synthesis of electrorheological suspension containing salt of poly(methacrylic acid) and its electrorheological effect

Colloidal suspensions containing salts of poly(methacrylic acid) which exhibit high electrorheological (ER) activity were synthesized by inverse emulsion polymerization. Factors influencing the ER effect were studied. The results showed that maximum yield stress occurred at optimum amounts of both polymeric stabilizer and crosslinking agent used in the inverse emulsion polymerization as well as a certain water content of the particles, while yield stress increased with electric field strength, average diameter of the particles below 0.9 μm, or the molar ratio of the salt to the acid. The ER activity for the suspensions containing different monovalent counter ions decreased in the following order: Li⁺ > Na⁺ > K⁺ > NH₄⁺. The phenomena were discussed with the ionic polarization mechanism. © 1995 John Wiley & Sons, Inc.     

基于表面反应和扩散迁移控制的灰岩单裂隙渗流—溶解模型及其数值模拟

针对碳酸盐类可溶岩地区水电站坝址流场、化学场以及固相介质属性等随时间发生改变,从而对工程安全运行造成不利影响等问题,研究了灰岩地区地下水运移过程中各物理场间的相互作用,分析了影响灰岩溶解速率的两个因素,即表面反应控制和扩散迁移控制。在此基础上,建立了单裂隙中的渗流—溶解耦合模型,并进行数值求解。模拟结果表明,在垂直裂隙延伸方向,其溶蚀锋面为非齐整平面,而是呈似“虫洞”状非均一变化,而沿裂隙延伸方向即自上游侧向下游方向溶蚀程度逐渐减轻;而通过裂隙的流量呈现随时间逐渐增大的趋势,但变幅不大;根据流量求得的等效水力隙宽,其增幅和增长速率均小于实际平均隙宽;同时,化学场中Ca2+浓度的分布与裂隙开度变化具有相似性,不同时刻下上游侧反应速率R均大于下游侧。就反应机制而言,在初期均受表面反应控制,而随反应进行,位于上游补给区部位转为受扩散迁移控制,但在下游位置仍受表面反应控制。     

Differences in electrochemical corrosion behaviours between selective laser melted and wrought Ti6Al4V alloys in acid fluoride-containing artificial saliva

Journal of Applied Electrochemistry - In this work, the electrochemical corrosion behaviours of selective laser melted (SLMed) and wrought Ti6Al4V alloys in acid fluoride-containing artificial...     

EFFECT OF SILICON ON THE TRANSITION OF BRITTLENESS IN A NICKEL BASE WROUGHT SUPERALLOY

Ni-15Cr-6W-3Mo-2Al-2Ti变形高温合金的室温抗张强度、塑性和冲击性能,随着合金中Si含量的变化呈现马鞍型的变化,即在0.4—0.6％Si范围内出现一个低塑性、低拉伸强度和低冲击韧性区。造成这种现象的本质原因是由于Si含量变化改变了晶界碳化物沉淀析出顺序、析出类型、析出量和析出形态。该合金晶界碳化物析出可分为四个阶段:第一阶段,<0.1％Si时,只有单一的M_(23)C_6析出;第二阶段,>0.1％Si以后,除M_(23)C_6外,M_6C开始析出,一直到0.4％Si时增加2缓慢;第三阶段,0.4—0.6％Si时,M_6C大量析出逐渐取代M_(23)C_6;第四阶段,>0.6％Si以后,M_6C量占绝对优势,但增加幅度比第三阶段小得多。从晶界形态来看,第一、二、四阶段皆属不连续的链状形式,只有第三阶段晶界呈现连续膜状。因此,造成性能下降的原因不是因为析出M_6C,而是它的形态,当它以颗粒状分布在晶界上时是一个很好的强化相。第三阶段的不正常析出是性能下降的本质因素。本研究结果打破了只要镍基合金中MO+1/2>W>6％(重量百分比)就形成M_6C的经验判据,“Si”才是该合金碳化物沉淀析出过程的控制因素。本文还对比了冶炼工艺差别对碳化物析出过程的影响。     

Video summarization via minimum sparse reconstruction

The rapid growth of video data demands both effective and efficient video summarization methods so that users are empowered to quickly browse and comprehend a large amount of video content. In this paper, we formulate the video summarization task with a novel minimum sparse reconstruction (MSR) problem. That is, the original video sequence can be best reconstructed with as few selected keyframes as possible. Different from the recently proposed convex relaxation based sparse dictionary selection method, our proposed method utilizes the true sparse constraint L₀ norm, instead of the relaxed constraint _L2,1$L_{2,1}$ norm, such that keyframes are directly selected as a sparse dictionary that can well reconstruct all the video frames. An on-line version is further developed owing to the real-time efficiency of the proposed MSR principle. In addition, a percentage of reconstruction (POR) criterion is proposed to intuitively guide users in obtaining a summary with an appropriate length. Experimental results on two benchmark datasets with various types of videos demonstrate that the proposed methods outperform the state of the art.