A theory for the free shrinkage of steel fibre reinforced cement matrices

The paper presents a theoretical model to predict the free shrinkage of cement matrices reinforced with randomly oriented discrete steel fibres. The model is based on the consideration that the equivalent aligned length of a random fibre is responsible for restraining the shrinkage of a thick matrix cylinder of diameter equal to the fibre spacing, through the fibre-matrix interfacial bond strength. The validity of the model is established by means of extensive experimental data for different types of steel fibres in cement, mortar or concrete matrices. The theoretical model is also used to determine the values of coefficient of friction,, and the average bond strength,, of the fibre-matrix interface. It is shown that is a basic property of the matrix and fibre interface, which is affected by the surface roughness and mechanical deformation of the fibres., however, is greatly influenced by the shrinkage of the matrix and volume fraction of fibres. Finally, an empirical expression is derived to determine the shrinkage of steel fibre reinforced cement matrices based on the shrinkage of unreinforced matrices and fibre properties.     

Optimal pixel aspect ratio for enhanced 3D TV visualization

In multiview 3D TV, a pair of corresponding pixels in adjacent 2D views contributes to the reconstruction of voxels (3D pixels) in the 3D scene. We analyze this reconstruction process and determine the optimal pixel aspect ratio based on which the estimated object position can be improved given specific imaging or viewing configurations and constraints. By applying mathematical modeling, we deduce the optimal solutions for two general stereo configurations: parallel and with vergence. We theoretically show that for a given total resolution a finer horizontal resolution, compared to the usual uniform pixel distribution, in general, provides a better 3D visual experience for both configurations. The optimal value may vary depending on different configuration parameter values. We validate our theoretical results by conducting subjective studies using a set of simulated non-square discretized red–blue stereo pairs and show that human observers indeed have a better 3D viewing experience with an optimized vs. a non-optimized representation of 3D-models.     

Controlled Creating of Cracks in Concrete for Non-destructive Testing

The non-destructive assessment of cracks in concrete is a common task for which non-destructive evaluation solutions have been published. Primarily, these tests have been carried out on artificial cracks that have been created by using notches instead of natural cracks. This study evaluates a procedure designed to create reproducible and controlled cracks in concrete. The procedure is based on using expanding mortar in a series of blind holes. This is done in combination with carefully aligned reinforcement to guide the direction of the crack development. The depth of the crack is also controlled by reinforcement. Crack depth varies statistically in the range of the maximum aggregate size (16 mm) used for concrete.     

Application of mesoporous magnetic carbon composite for reactive dyes removal: Process optimization using response surface methodology

Discharging the effluents of textile wastewaters into potable water resources can endanger the ecosystem, due to their reactivity, toxicity, and chemical stability. In this research, the application of powder activated carbon modified with magnetite nanoparticles (PAC-MNPs) as an adsorbent for removal of reactive dyes (Reactive black 5 (RB5) and reactive red 120 (RR120)) was studied in a batch system. The adsorption performance was evaluated as a function of temperature, contact time and different adsorbent and adsorbate concentrations. The levels of factors were statistically optimized using Box-Behnken Design (BBD) from the response surface methodology (RSM) to maximize the efficiency of the system. The adsorption process of both dyes was fit with the pseudo-second order kinetic and Langmuir isotherm models. The identified optimum conditions of adsorption were 38.7 °C, 46.3 min, 0.8 g/L and 102 mg/L for temperature, contact time, adsorbent dose, and initial dyes concentration, respectively. According to the Langmuir isotherm, the maximum sorption capacities of 175.4 and 172.4 mg/g were obtained for RB5 and RR120, respectively. Thermodynamics studies indicated that the adsorption process of the reactive dyes was spontaneous, feasible, and endothermic. After five cycles, the adsorption efficiency was around 84 and 83% for RB5 and RR120, respectively. A high value of desorption was achieved, suggesting that the PAC-MNPs have a good potential in regeneration and reusability, and also can be effectively utilized in industrial applications. PAC-MNPs also show a good anti-interference potential for removal of reactive dyes in dye-industry wastewaters.     

A strain-energy-density-based lifetime prediction model for notched specimens: Polycarbonate under thermal fatigue

Polycarbonate is more and more extensively used in engineering because of its good mechanical properties. Pieces of polycarbonate are used in environments with variable temperature, especially in electronic devices. Thermal stresses could become important and, for this reason, the effects of thermal stresses must be taken into account in designing these pieces. We propose a method for the prediction of the life of notched specimens based on the density of dissipated strain energy. The laws of behavior of polycarbonate at various temperatures are determined, and the fatigue tests performed on smooth specimens give the laws of thermal fatigue of the material. The fatigue tests on notched specimens and finite-element-method computations enable us to establish the relationship between the stress concentration factor, the density of strain energy dissipated at the notch roots, and the density of nominal strain energy. A life-prediction model is proposed and discussed. Laboratory of Mechanical Reliability, Metz University, Metz, France. Published in Problemy Prochnosti, No. 6, pp. 32–42, November–December, 1998.     

Physical and chemical characterization of adsorbed protein onto gold electrode functionalized with Tunisian coral and nacre

Bone substitutes are more and more used in bone surgery because of their biologic safety, clinic efficiency and facility to synthesize. Bone substitutes with active osteogenic properties, associating biomaterials with organic macromolecule components of the extracellular matrix (protein, GAG) are recommended. Nevertheless, we should have a simple technique to control interactions between proteins and the material. Natural coral and nacre have been found to be impressive bone graft substitutes. In this work, we characterize nacre and coral powder using energy dispersive X-ray analysis (EDX). We used electrochemical impedance spectroscopy (EIS) and attenuated total reflectance Fourier transform infrared (ATR-FTIR) spectroscopy to evaluate bovine serum albumin (BSA) as model protein, adsorbed to these biomaterial surfaces. In order to understand the nacre/coral-protein interfacial compatibility, it is necessary to investigate the wettability.     

Novel microwave–freeze drying of onion slices

The present study aimed to introduce the capability of a novel dehydration technique. To do so, slices with various thicknesses (3.5 and 7 mm) of white onions were dried using commercial freeze drier (abs. pressure 0.005 mbar, temp. 45 °C), our own designed microwave-vacuum drier (abs. pressure down to 300 mbar) under various microwave powers (120–1200 W) and microwave-vacuum–freeze drier (onion slices kept at −20 °C for 2 h). Then, their dehydration rates and some quality parameters, such as rehydration ratio, colour ( L*, a* and b* ) and micro-structure were investigated. Our findings showed that microwave-vacuum–freeze drier is practically a rapid, simple, efficient, economic and novel dehydration technique which can be used for dehydration of mainly foodstuffs. The quality properties of slices produced by this novel method were also completely comparable and competitive with commercial freeze drier with over 96% saving on processing time and enormous amount on energy and capital investments.