A novel ceramic matrix composite based on YNbO4–TiO2 for microwave applications

This work presents the dielectric properties of YNbO₄ (YNO)–TiO₂ composites in the microwave range. X-ray diffraction analysis demonstrates that the addition of TiO₂ to YNO results in the formation of a Y(Nb_0.5Ti_0.5)₂O₆ phase. In the microwave range, the values of permittivity and dielectric loss did not present major changes with the increment of TiO₂. Moreover, the addition of TiO₂ results in an improvement in the thermal stability of YNO, with YNO63 demonstrating a resonant frequency of ?8.96 ppm.°C^?1. We utilised numerical simulations to evaluate the behaviour of these materials as dielectric resonator antennae and it is found that they exhibit a reflection coefficient below ?10 dB at the resonant frequency, with a realised gain of 4.94 – 5.76 dBi, a bandwidth of 665–1050 MHz and a radiation efficiency above 84%. Our results indicate that YNO–TiO₂ composites are interesting candidates for microwave operating devices.     

Two-step sinter-crystallization of K2O–CaO–P2O5–SiO2 (45S5-K) bioactive glass

Bioactive glasses and glass-ceramics (GCs) effectively regenerate bone tissue, however most GCs show improved mechanical properties. In this work, we developed and tested a rarely studied bioactive glass composition (24.4K₂O-26.9CaO-46.1SiO₂-2.6P₂O₅ mol%, identified as 45S5-K) with different particle sizes and heating rates to obtain a sintered GC that combines good fracture strength, low elastic modulus, and bioactivity. We analyzed the influence of the sintering processing conditions in the elastic modulus, Vickers microhardness, density, and crystal phase formation in the GC. The best GC shows improved properties compared with its parent glass. This glass achieves a good densification degree with a two-step viscous flow sintering approach and the resulting GC shows as high bioactivity as that of the standard 45S5 Bioglass®. Furthermore, the GC elastic modulus (56 GPa) is relatively low, minimizing stress shielding. Therefore, we unveiled the glass sintering behavior with concurrent crystallization of this complex bioactive glass composition and developed a potential GC for bone regeneration.     

Current advances concerning the most cited metal ions doped bioceramics and silicate-based bioactive glasses for bone tissue engineering

Studies related to biomaterials that stimulate the repair of living tissue have increased considerably, improving the quality of many people's lives that require surgery due to traumatic accidents, bone diseases, bone defects, and reconstructions. Among these biomaterials, bioceramics and bioactive glasses (BGs) have proved to be suitable for coating materials, cement, scaffolds, and nanoparticles, once they present good biocompatibility and degradability, able to generate osteoconduction on the surrounding tissue. However, the role of biomaterials in hard tissue engineering is not restricted to a structural replacement or for guiding tissue regeneration. Nowadays, it is expected that biomaterials develop a multifunctional role when implanted, orchestrating the process of tissue regeneration and providing to the body the capacity to heal itself. In this way, the incorporation of specific metal ions in bioceramics and BGs structure, including magnesium, silver, strontium, lithium, copper, iron, zinc, cobalt, and manganese are currently receiving enhanced interest as biomaterials for biomedical applications. When an ion is incorporated into the bioceramic structure, a new category of material is created, which has several unique properties that overcome the disadvantages of primitive material and favors its use in different biomedical applications. The doping can enhance handling properties, angiogenic and osteogenic performance, and antimicrobial activity. Therefore, this review aims to summarize the effect of selected metal ion dopants into bioceramics and silicate-based BGs in bone tissue engineering. Furthermore, new applications for doped bioceramics and BGs are highlighted, including cancer treatment and drug delivery.     

Self-oscillating dimmable electronic ballast

This paper presents a simple alternative for an electronic ballast operating in self-sustained oscillating mode with dimming capability for fluorescent lamps. A simple modification in one of the gate drivers side circuit allows the lamp to dim without compromising the simplicity, reliability, and low cost which characterize the self-oscillating electronic ballast (SOEB). A qualitative analysis is presented to explain the behavior of the proposed self-oscillating electronic ballast with dimming feature. In addition, the stability and the key equations for the design are derived using the extended Nyquist criterion and describing function method. Experimental results from two 40-W electronic ballasts are presented to demonstrate the performance and to validate the analysis carried out.     

0. 6 􀀁m CMOS 雷达天线专用控制芯片设计

雷达系统中天线控制电路完成上位机的初始化和扫描角度控制,要求具有高可靠性和低静态电流,用专用集成电路进行设计具有明显优势.采用Verilog HDL语言描述了系统的逻辑功能,超前进位结构的加/减法器提高了电路的工作速度.利用0.6 μm CMOS工艺完成了天线控制电路的物理实现,芯片面积为1.695 mm×1.631 mm.     

Cerebral protection by intermittent reperfusion during temporary focal ischemia in the rat

Temporary arterial occlusion has been routinely used as an adjunct in intracranial aneurysm surgery. This has commonly been performed using a protocol of multiple short periods of occlusion alternating with periods of restoration of normal circulation. Recently, the logical basis of this method has come under scrutiny. There is extensive experimental evidence to suggest that repetitive, brief periods of global ischemia may cause more severe cerebral injury than an equivalent single period of global ischemia. Only recently has this issue begun to be addressed with regard to focal ischemia. Hence, despite the common use of temporary clipping, little experimental data are available regarding the ischemic consequences of temporary arterial occlusion with periods of reperfusion versus uninterrupted temporary occlusion. To investigate this issue, a protocol of occlusion/reperfusion that simulates the temporal profile that occurs during surgery was performed in a rat model of focal ischemia. Sixteen anesthetized Sprague-Dawley rats were divided into two groups. The animals in Group I underwent 60 minutes of uninterrupted middle cerebral artery occlusion and the animals in Group II were subjected to six separate 10-minute occlusion periods with 5 minutes of reperfusion between occlusions. Histopathological analysis was performed 72 hours postischemia. Group I had significantly increased mean infarction volumes (50.0 +/- 12.1 mm3) compared to Group II (8.7 +/- 3.1 mm3) (p = 0.008). Injuries in Group I occurred in both the cortex and striatum, whereas Group II showed only striatal injuries. Furthermore, the extent of the injuries in Group II was less severe, characterized by ischemic neuronal injury rather than frank infarction. The results indicate that intermittent reperfusion is neuroprotective during temporary focal ischemia and support the hypothesis that intermittent reperfusion is beneficial if temporary clipping is required during aneurysm repair.     

XPS studies of directly fluorinated HDPE: problems and solutions

X-ray photoelectron spectroscopy (XPS) applied to the study of fluorinated polymer surfaces presents several problems related both to peak assignment and to degradation. In this work, we analyse extensively the question of XPS peak assignments in this kind of surfaces. We conclude that in this kind of surfaces using binding energy differences between fluorine and carbon is better than using absolute binding energies. Also a useful relation between fluorine photoelectron energy vs. polymer composition expressed through the atomic ratio fluorine/carbon (F/C) was found. A protocol for data treatment is proposed and applied to a XPS study of the degradation induced by X-ray on high-density polyethylene surfaces modified by direct fluorination. Results obtained for the degradation, namely the atomic ratio F/C obtained by two different methods, combined with angle resolved X-ray photoelectron spectroscopy (ARXPS) were used to study the fluorine concentration profile in depth, producing self-consistent results.     

The nootropic correction of disorders in learning and memory processes induced by extreme exposures

Experiments on rats demonstrated that the low-intensity electromagnetic field (12.6 cm, 2375 MHz, power density 1 mW/cm2), motion sickness, and electroconvulsive shock provoked the retrograde amnesia in the passive avoidance test. The oxyracetam (100 mg/kg, i.p.), aniracetam (50 mg/kg, i.p.), nooglutil (50 mg/kg, i.p.), meclofenoxate (50 mg/kg, i.p.), pyracetam (200 mg/kg, i.p.), and GABA (200 mg/kg, i.p) prevented the memory-impairing effect of all these extreme factors. On the contrary, the N-acetylglycinamide, semax, and other nootropic drugs were effective only under one or two extreme conditions.     

The prospects for using the genetically engineered surface antigen of the hepatitis B virus (HBsAg) expressed by recombinant poxvirus strains as the basis for vaccines against hepatitis B

The use of a recombinant poxvirus (RPV) strain, expressing HBsAg in the process of reproduction in different bioreactor systems under stationary and bioreactor conditions of cultivation, made it possible to obtain highly purified HBsAg. The identity and purity of HBsAg was confirmed by the analysis of its amino acid composition, SDS electrophoresis in polyacrylamide gel, electron microscopy and high-performance liquid chromatography. Good prospects of the use of RPV-expressed gene engineering HBsAg as the basis vaccines against hepatitis B was demonstrated in 10 experimental batches of vaccine. All batches of the preparation had pronounced immunogenicity and were safe and nontoxic in animal experiments. The ID50 of experimental batches did not exceed 211 ng/ml, which, according to the data of comparative experiments, was lower than, or equal to, corresponding values of analogous foreign commercial preparations, based on plasma or yeast HBsAg.