A novel flow field with controllable pressure gradient to enhance mass transport and water removal of PEM fuel cells

An easily machined novel flow field with controllable pressure gradient across adjacent channels was designed and a two dimensional, across-the-channel, two-phase model was developed to study the gas transport and water removal of the novel configuration. The effect of channel-rib width ratio, GDL thickness and pressure gradient on the profiles of oxygen concentration and water saturation within the GDL were investigated. Special attention was paid to the mechanisms of the promoted mass transport and water removal rates under a pressure gradient. The model was validated by experiments with various channel-rib ratios and GDL thicknesses at different operating pressure. The results revealed that, oxygen concentration was increased, and the water saturation was reduced under the rib with a pressure gradient generated across the adjacent channels. The optimal pressure gradient is between 0.1 to 0.2 atm for the studied channel geometry and configuration. The mechanisms of the improved cell performance were elucidated.     

Application of bicubic splines in the boundary element method

In this paper, we proposed the method for improving the accuracy of BEM, which is based on application of bicubic splines for interpolation functions. Application of bicubic splines ensures continuity of class C¹ at the boundaries of element. Such an interpolation results in smooth approximation of the surface sources leading to high accuracy of computation. Set of integral equations is solved by implementation of Galerkin method for determination of unknown coefficients.The accuracy of the proposed approach is illustrated by comparison of the solution of electric field in thin-plate capacitor by BEM using bicubic splines, second-order polynomial, linear and piecewise-constant interpolation.     

Antitumor Activity of Ionic Liquids Based on Ampicillin

Significant antiproliferative effects against various tumor cell lines were observed with novel ampicillin salts as ionic liquids. The combination of anionic ampicillin with appropriate ammonium, imidazolium, phosphonium, and pyridinium cations yielded active pharmaceutical ingredient ionic liquids (API‐ILs) that show potent antiproliferative activities against five different human cancer cell lines: T47D (breast), PC3 (prostate), HepG2 (liver), MG63 (osteosarcoma), and RKO (colon). Some API‐ILs showed IC₅₀ values between 5 and 42 nM , activities that stand in dramatic contrast to the negligible cytotoxic activity level shown by the ampicillin sodium salt. Moreover, very low cytotoxicity against two primary cell lines—skin (SF) and gingival fibroblasts (GF)—indicates that the majority of these API‐ILs are nontoxic to normal human cell lines. The most promising combination of antitumor activity and low toxicity toward healthy cells was observed for the 1‐hydroxyethyl‐3‐methylimidazolium–ampicillin pair ([C₂OHMIM][Amp]), making this the most suitable lead API‐IL for future studies.     

Improvement of the stoichiometric network analysis for determination of instability conditions of complex nonlinear reaction systems

Stoichiometric network analysis (SNA), a known method for analyzing complex reaction systems including biochemical ones, is improved and applied to a nonlinear process studied far from equilibrium in a continuously fed, well stirred tank reactor (CSTR). A particular attention is focused on the determination of the narrow range of the control parameter values where the main steady state is unstable and where different dynamic states can be simulated numerically. The instability region, the most important feature of nonlinear reaction systems, is calculated as a function of the SNA parameters (current rates and reciprocal concentrations of intermediate species in the steady state) and simplified by retaining only the dominant terms. Since the number of the current rates is usually larger than the number of linearly independent equations to be used for their calculation, it is shown here that the current rates can be replaced with a smaller number of reaction rates at the steady state. These rates are related to the experimental data in a simple manner. The instability condition is also written as a function of dimensionless parameters derived from the SNA. This general approach is applied to a model of the Bray–Liebhafsky (BL) reaction having seven reactions without direct autocatalysis or autoinhibition, studied under CSTR conditions. Since the model has six intermediate species, it would be very difficult to analyze its instability condition by the conventional procedure, where a sixth order characteristic equation would have to be solved. On the other hand, the instability condition, obtained easily by the improved SNA, locates correctly the oscillatory region using numerical integration. Other dynamic states found earlier with a larger model of the BL reaction, such as mixed-mode oscillations, period doubling and chaos, are also obtained within the theoretically predicted oscillatory region. Thus, besides the general advantages of the improved stoichiometric network analysis as a method appropriate for the examination of complex nonlinear reactions, we show that the various mentioned dynamic states can be obtained by a very simple variant of the model of the BL reaction realized under CSTR conditions.     

Compression resistance and hysteresis of carbon fibre tows with grown carbon nanotubes/nanofibres

Growth of carbon nanotubes (CNT) or carbon nano-fibres (CNF) on fibrous substrates is a way to increase the fracture toughness of fibre reinforced composites (FRC), with encouraging results reported in the recent years. The issues for these materials related to manufacturing of these composites are, however, less investigated. Following the study of compressibility of woven carbon fibre preforms with CNT/CNFs grown on the fibres using the CVD method [Compos Sci Technol 2011; 71(3): 315-325], this paper describes compression tests on the carbon tows used in these fabrics. The results of the measurements include pressure vs. thickness diagrams in consecutive compression cycles and hysteresis of the compression. The results confirm a drastic change of compressibility of fibrous assemblies in the presence of CNT/CNF grafting.     

Compressibility of carbon woven fabrics with carbon nanotubes/nanofibres grown on the fibres

Growth of carbon nanotubes (CNT) or carbon nano-fibres (CNF) on carbon fibrous substrates is a way to increase the fracture toughness of fibre reinforced composites (FRC), with encouraging results reported in the recent years. If these nano-engineered FRC (nFRC) are destined to leave laboratories and enter industrial-scale production, a question of adapting the existing composite manufacturing methods will arise. The paper studies compressibility of woven carbon fibre performs (two types of fabrics) with CNT/CNF grown on the fibres using the CVD method. The results include pressure vs thickness and pressure vs fibre volume fraction diagrams for one and four layers of the fabric. Morphology of the nFRC is studied with SEM. It is shown that the pressure needed to achieve the target fibre volume fraction of the preform increases drastically (for example, from 0.05 MPa to more than 0.5 MPa for a fibre volume fraction of 52%) when CNT/CNF are grown on it. No change in nesting of the fabric plies is noticed. The poor compressibility can lower the achievable fibre volume fraction in composite for economical vacuum assisted light-RTM techniques and increase the pressure requirements in autoclave processing.     

A method for closed-loop identification of Nyquist curve in three quadrants

This paper proposes a generalization of Ziegler–Nichols' (ZN) experiment that allows the closed-loop identification of Nyquist curve of a linear plant in three quadrants. As in the standard ZN method, no extra equipment is needed. Moreover, sustained undamped oscillations in the plant are not required, since the identification may be accomplished with damped oscillations only. The plant may even be unstable, assuming the used controller is able to stabilize the plant.