Safety Analysis of ITER EDA Design by GEMSAFE

General Methodology of Safety Analysis and Evaluation for Fusion Systems (GEMSAFE) was applied to the International Thermonuclear Experimental Reactor (ITER) design in the stage of Engineering Design Activities (EDA) to identify Design Basis Events (DBEs) and the related safety features, which were compared with those of the ITER design in the stage of Conceptual Design Activities (CDA). As a result, 18 DBEs for the EDA design were selected in comparison with 25 DBEs for the CDA design. DBEs related to the fuel area were categorized in higher event category than those of the CDA design due to the increase of the mobile tritium contained in some components. It was necessary to reduce the inventory of the tritium absorbed in the tokamak dust in the EDA design as well as in the CDA design. Some measures were recommended to reduce mobile tritium dissolved in the coolant in the single cooling loop due to the increase of this estimated inventory.     

Synthesis and antibacterial activity of novel 7-(3-substituted-3 or 4-trifluoromethyl-1-pyrrolidinyl)-8-methoxyfluoroquinolones

The titled compounds were synthesized and evaluated for in vitro antibacterial activity. The (3R, 4S)-3-aminomethyl-4-trifluoromethyl derivative (S-34109) was confirmed to be optimal because of its superior activity against quinolone and methicillin-resistant Staphylococcus aureus and low side effect potential.     

Development of NbTi superconducting strands and cables for the field winding of a 200‐MW‐class high‐energy‐density superconducting generator

The NbTi superconducting strands and cables for the field winding of the 200‐MW‐class high‐energy‐density‐type superconducting generator are developed. They are composed of Cu/Cu‐10wt%Ni/Nb‐46.5wt%Ti superconducting strands and the 10‐kA (at 5 T)‐class 9‐strand compacted cables. The diameter of strands is 1.33 mm, and the 9‐strand compacted cables are 2.4 mm thick and 6.0 mm wide. In order to produce high‐current‐density NbTi strands, we made strands under controlled aging heat treatments, the total and final strains, and the strains between heat treatments, by using large‐scale extruder. Moreover, in order to produce high‐stability and low‐AC‐loss NbTi strands and cables, the matrix ratio of strands and the cross sections of strands are optimized. The current density of NbTi filaments for the four‐time‐aging manufactured 1.33‐mm‐diameter strands was J_C=3150 A/mm² at 5 T, 1150 A/mm² at 8 T. The critical current of the 9‐strand compacted cable is 10.7 kA at 5 T. The AC losses of the final compacted cables are less than 100 kW/m³ at 5 T, 5 T/s, that is, decreased to less than half of the target of the AC loss value (< at 5 T, 5 T/s). Compared with the strand (Cu ratio 1.77), the minimum quench energy (MQE) of the strand (Cu ratio>2) increased about 40% at the operation mode current of the superconducting generator. © 2006 Wiley Periodicals, Inc. Electr Eng Jpn, 156(3): 24– 31, 2006; Published online in Wiley InterScience ( www.interscience.wiley.com ). DOI 10.1002/eej.20266     

1997-2017年泰国蒙河流域水环境时空变化分析

蒙河(Mun River)流域是泰国东北部重要农业区,也是湄公河主要支流。随着流域经济社会发展,流域水环境难以避免受到扰动,研究其时空变化特征对于该区域及湄公河中下游的水生态环境保护具有重要意义。基于泰国污染管制署1997-2017年水质监测数据,应用季节性Kendall检验法分析代表性水质指标含量的变化趋势,并采用水质指数(water quality index)法分析流域整体水环境的时空分异特征。结果表明:尽管蒙河流域水环境总体质量尚好,近20年来水质总体上无趋势性变化,但存在明显的年内季节性变化以及空间差异。各监测站点非汛期水质状况一般好于汛期,而流域下游水质往往好于上游。推测土壤侵蚀、养分淋溶和城镇化进程是影响流域水环境的重要因素。