Analysis of optical coherence multiplexing networks for satellite communication

Free-space optical communication between satellites networked together can enable a high data rate between the satellites. Coherence multiplexing (CM) is an attractive technique for satellite networking due to its ability to cope with the asynchronous nature of communication traffic and the dynamic changes taking place in the satellite constellation. The use of optical radiation for intersatellite links creates very narrow beam divergence angles. Due to the narrow beam divergence angle, the vibration of the pointing system, the movement of the satellite, and the large distance between them the pointing from one satellite to another is a complicated task. The vibration of the pointing system is caused by two stochastic fundamental mechanisms: 1) tracking noises created by the electrooptic tracker and 2) vibrations created by internal satellite mechanical mechanisms and external environments. We derive mathematical models of signal, noise, the approximate signal-to-noise ratio, and the approximate bit-error rates of optical communication satellite networks as functions of the system's parameters, the number of satellites, and the vibration amplitude for frequency-shift keying coherence multiplexing (FSK-CM). Based on these models, we can calculate the negative impact of both the number of satellites and the optical terminal vibration on the system's performance.     

Air sampling of volatile sex pheromone components in a closed jar

A cotton wool plug, used as the source for pheromone release, was placed in closed 1-quart Mason jars, either at the mouth or at the rear of the jar. Air sampling of the two components of the sex pheromone (total 2.2 mg at the source) of the almond moth (Ephestia cautella) female showed that the saturation period near the source in still air was 20–22 hr and that far from the source was 40–50 hr, reaching a level of less than 1 ng/ml air. The ratio between the components (Z,E)-9,12-tetradecadienyl acetate, designated D, and (Z)-9-tetradecenyl acetate designated M, in the air was close to the original ratio for both sampling sites, albeit somewhat richer in the more volatile (Z)-9-tetradecenyl acetate (source 77.023.0 DM, air 73.0– 74.327.0–25.7; source 80.119.9, air 77.622.4; source 25.174.9, air 23.976. 1 DM). The total amount of pheromone per milliliter of air was two to three times larger near the source than far from it at the early stages of the evaporation and saturation process. When the amount of pheromone applied to the source was tripled (7 mg), the amount far from the source was almost tripled, or the saturation time was cut by factor of two to three.     

Optimization of urban optical wireless communication systems

Urban optical wireless communication systems are considered a "last mile" technology. An optical wireless communication system uses the atmosphere as a propagation medium. In order to provide line-of-sight (LOS), the transceivers are placed on high-rise buildings. However, dynamic wind loads, thermal expansion, and weak earthquakes cause buildings to sway. These sways require the designer to increase the transmitter beam divergence angle so as to maintain LOS between the transmitter and the receiver. It is clear that an overly wide divergence angle increases the required laser power, and, as a result, terminal cost and complexity increase. On the other hand, an overly narrow beam divergence angle may result in cutoff in communication when there is building sway. In this paper, we derive a mathematical model to minimize transmitter power and optimize transmitter gain (divergence angle) as a function of the building-sway statistics, the communication system parameters, and the required bit-error probability (BEP). Reduction in laser power could improve overall system performances and cost. For example, for BEP of 10/sup -9/, we can attain at least a 4-dB reduction of the required transmitter power in comparison to a system with both half and twice the optimum beam divergence angle.     

Reduced speed of sound in tibial bone of haemodialysed patients: association with serum PTH level

BACKGROUND: In end-stage renal disease, average bone mineral density has been reported to be normal or only modestly reduced, more so in the cortical bone. The purpose of the present study was to explore the potential use of quantitative ultrasound, a method reflecting both quantitative and qualitative properties of bone, in assessing bone status in patients on maintenance haemodialysis. METHODS: We studied 71 patients (age 17-81 years, time on dialysis 0-18 years). The speed of sound waves (tSOS; m/s) propagating along the cortical bone has been determined at the tibial shaft. tSOS results were expressed as Z scores, i.e. units of standard deviations from age- and sex-matched normal mean values, and correlated with relevant clinical and biochemical variables. RESULTS: SOS Z score averaged -2. 0 (range -6.8 to 0.6; P<0.001) and was negative in 93% of the patients. Significant inverse correlations were found between SOS Z score and both time on dialysis (r=-0.52; P<0.0001) and serum PTH (r=-0.39; P=0.0002). Markedly reduced SOS Z score, below -2, was found in 80% of the patients whose PTH levels exceeded 34 pmol/l (five times the upper normal limit), compared with 43% of the patients whose PTH levels were below 34 pmol/l(P=0.04). Compared to patients without bone pain (n=51), subjects with bone pain (n=20) had somewhat lower SOS Z scores -2.5+/-2.0 versus -1.8+/-1.4; P=0. 08), but this could be accounted for by longer time on dialysis. CONCLUSIONS: tSOS is substantially reduced in the majority of haemodialysed patients and is related to time on dialysis and serum PTH level. The clinical value of this novel method needs further exploration.     

Crystallization of crystalline/crystalline blends: Polypropylene/polybutene-1

The crystallization, from molten blends, of polypropylene (PP) and polybutene-1 (PB), two highly crystallizable, polymers, their interaction in the amorphous phase, and the resulting tensile mechanical properties were studied. The crystallization was followed by DSC, showing two separate PP and PB crystallization processes which are affected each by the presence of the other component. The crystallization temperature of PP is significantly affected only in PB rich blends whereas that of PB is affected in the whole composition range. The PP crystalline phase, acting as a nucleating agent, increases the PB crystallization temperature whereas the PP amorphous phase, acting as a high viscosity polymeric diluent, reduces the PB crystallization temperature. The first effect is dominant at low PP content, and the second one becomes increasingly effective with increasing PP content in the blend. The interaction between the two polymers in the amorphous phase was studied by applying dynamic mechanical analysis, in which a single glass transition was observed for the blends and its temperature was found to vary with the blends' composition. Tensile mechanical properties of blends were found to be more sensitive to thermal treatments, such as isothermal crystallization or annealing at elevated temperatures, than single component systems. Such thermal treatments enable better structured blends to be formed, resulting in mechanical properties with no abrupt changes in the whole composition range.     

Evidence for a short-range sex pheromone in female Maladera matrida beetle

Laboratory studies with live and frozen Maladera matrida female and male beetles showed that males were attracted to chemical substances emanating from the females at dusk. Beetles exhibited sexual activity (including mating) at dusk towards frozen females but not towards frozen males. Frozen females that had been extracted with methanol together with either hexane or dichloromethane or with a mixture of all three solvents did not elicit male sexual activity. Activity was fully restored when a concentrate of the extract was applied to the previously extracted frozen females. Males also responded with vigorous sexual activity to frozen males to which female extract had been applied. Deterrent chemicals appear to be absent from the male body. Males exposed to females that had been frozen during the morning displayed weak sexual activity, indicating that females lack active semiochemicals. Differences between dusk and morning extracts were found with respect to more than 20 compounds, some of which were present in much higher concentrations at dusk than in the morning, while others were not detected in the morning extract. The active component(s) of the short-range sex pheromone of female M. matrida is (are) presumably to be found among these compounds.     

Influence of barium titanate content and particle size on electromechanical coupling coefficient of lead-free piezoelectric ceramic-Portland cement composites

The 0–3 lead-free piezoelectric ceramic-Portland cement composites were prepared by mixing and pressing the Portland cement (PC) and barium titanate (BT) ceramic powder. The influences of BT particle size and BT content on the electromechanical coupling coefficient (K_t) of the composites were investigated. The results indicate that the particle size of BT used to produce the composite under the conditions of the same BT content (at 50% BT) and fabrication technique has an influence on the K_t values. The electromechanical coupling coefficient was found to increase with the particle size of BT used where the values of K_t are found to be at 10.8% and 14.1% for composites with median particle size of 75 μm and 425 μm, respectively. Furthermore, K_t of composites increase with increasing content of BT (at the same particle size of 425 μm) when the content of BT reaches 70%, K_t is 16.6%. In addition, the acoustic impedance of the composite also increase with an increase of BT content.     

Transport of testosterone and estrogen from dairy-farm waste lagoons to groundwater

Although concentrated animal feeding operations constantly generate physiologically active steroidal hormones, little is known of their environmental fate. Estrogen and testosterone concentrations in groundwater and their distribution in sediments below a dairy-farm wastewater lagoon were therefore determined and compared to a reference site located upgradient of the farm. Forward simulations of flow as well as estrogen and testosterone transport were conducted based on data from the sediment profile obtained during drilling of a monitoring well belowthe dairy-farm waste lagoon. Testosterone and estrogen were detected in sediments to depths of 45 and 32 m, respectively. Groundwater samples were directly impacted by the dairy farm, as evidenced by elevated concentrations of nitrate, chloride, testosterone, and estrogen as compared to the reference site. Modeling potential transport of hormones in the vadose zone via advection, dispersion, and sorption could not explain the depths at which estrogen and testosterone were found, suggesting that other transport mechanisms influence hormone transport under field conditions. These mechanisms may involve interactions between hormones and manure as well as preferential flow paths, leading to enhanced transport rates. These types of interactions should be further investigated to understand the processes regulating hormone transport in the subsurface environment and parametrized to forecast long-term fate and transport of steroidal hormones.