Synthesis,characterization and magnetic properties of polythiophene/SrFe12-x(ZrZn)0.5xO19 nanocomposite as a microwave absorber

Ferrites are an important group of magnetic materials which are used as absorbers. The incorporation of ferrite and conducting polymer achieves great enhancement in microwave absorption properties. The nanocomposites of hexagonal ferrites embedded by conducting polymers such as polypyrrole, polyaniline and polythiophene (PTH) have been paid much attention. In the present study, strontium hexagonal ferrite doped by Zr and Zn with the final formula of SrFe_12-x(ZrZn)_0.5xO19 considering x = 0.9 and embedded by PTH was produced to achieve a nanocomposite with the highest microwave absorbing ability. In this study, after synthesis of SrFe₁₂O₁₉(ZrZn)_0.5xO19 and PTH, the nanocomposite was prepared by in situ polymerization. Wrapping the ferrite particles and PTH chains could form nanocomposite properly, and therefore acceptable interactions were observable between SrFe_12-x(ZrZn)_0.5xO19ferrite particles and PTH polymer chains in the composites. Assessing the X-ray diffraction (XRD) patterns of SrFe_12-x(ZrZn)_0.5xO19, PTH, and PTH/SrFe_12-x(ZrZn)_0.5xO19 nanocomposite indicated that the PTH characteristic peak shifts slightly and its peak intensity reduces, which may be attribute to the coating of PTH polymer chains onto SrFe_12-x(ZrZn)_0.5xO19 particles. We revealed also lower magnetic properties in the obtained nanocomposite. The morphological assessment also suggested that PTH could effectively coat the SrFe_12-x(ZrZn)_0.5xO19 particles. The synergistic effect of SrFe_12-x(ZrZn)_0.5xO19 particle plus PTH leads to microwave absorption percentage higher than 95% by PTH/SrFe_12-x(ZrZn)_0.5xO19 nanocomposite. Overall, nanocomposite creating by coupling interaction between SrFe_12-x(ZrZn)_0.5xO19 particles (x = 0.9) and PTH can effectively lead to achieve the highest rate of absorption of electromagnetic waves.     

In vitro antimicrobial effects of Myristica fragrans essential oil on foodborne pathogens and its influence on beef quality during refrigerated storage

Nutmeg (Myristica fragrans) seed was subjected to the hydro-distillation method to extract its essential oil (NEO). Its main constituents were α-pinene (20.16%), sabinene (14.45%), and β-pinene (13.26%) with great antimicrobial and antioxidant actions. A novel edible coating was then fabricated based on the sage seed mucilage (SSM) and NEO, to ameliorate the quality and shelf-life of beef slices. The NEO-loaded SSM coating was able to significantly decrease the population of total viable count, Escherichia coli, Staphylococcus aureus, psychrotrophic bacteria, and fungi. Moreover, lipid oxidation of beef slices was remarkably suppressed upon the application of bioactive NEO-loaded SSM edible coating, as compared with the control by Day 6. The coated beef sample, especially NEO-rich SSM coated ones perceived a higher consumer acceptance and firmness than the SSM coated and noncoated samples. The SSM edible coating containing NEO could therefore have the potential to control the growth of pathogenic microorganisms and lipid oxidation, and to improve the color stability and sensory properties of meat and meat products.     

Fuzzy reliability analysis of nanocomposite ZnO beams using hybrid analytical-intelligent method

A hybrid analytical-intelligent approach is proposed for fuzzy reliability analysis of the composite beams reinforced by zinc oxide (ZnO) nanoparticle. The fuzzy reliability index corresponding to buckling failure mode of nanocomposite beam under thickness-direction external voltage is computed based on three-levels: (1) fuzzy analysis, (2) reliability analysis and (3) analytical buckling analysis. In fuzzy analysis level, an improved gravitational search algorithm has been applied to determine uncertainty interval for membership levels of reliability index. The adaptive formulation with a dynamical self-adjusting process is used for reliability analysis level based on conjugate first-order reliability method (FORM). The self-adjusting term in conjugate sensitivity vector is used to satisfy the sufficient descent condition for controlling instability of FORM formula while the proposed conjugate scalar factor is computed less than the original conjugate FORM, thus it may be provided with the efficient results for the convex problem. The new and previous sensitivity vectors obtained by conjugate and steepest descent vectors dynamically adjusted the proposed conjugate factor. In the buckling analysis level, an exponential theory in conjunction with the method of energy is utilized. Fuzzy random variables including applied voltage, the volume fraction of ZnO, thickness of beam, spring constant and shear constant of the foundation are considered in studied nanocomposite beam. Survey results indicated that the proposed method can provide stable and acceptable fuzzy membership functions for parametric study. Moreover, the ratio of length to thickness and spring constant of foundation are the more sensitive parameters which affect fuzzy reliability index significantly.

     

An isogeometrical approach to structural topology optimization by optimality criteria

The Isogeometric Analysis (IA) method is applied for structural topology optimization instead of finite elements. For this purpose, a control point based Solid Isotropic Material with Penalization (SIMP) method is employed and the material density is considered as a continuous function throughout the design domain and approximated by the Non-Uniform Rational B-Spline (NURBS) basis functions. To prevent the formation of layouts with porous media, a penalization technique similar to the SIMP method is used. For optimization an optimality criteria is derived and implemented. A few examples are presented to demonstrate the performance of the method. It is shown that, dissimilar to the element based SIMP topology optimization, the resulted layouts by this method are independent of the number of the discretizing control points and checkerboard free.     

Investigation of deep drawing concept of multi-point forming process in terms of prevalent defects

Multi-point forming is a novel flexible process that is economically suitable for both rapid prototyping and batch production of sheet metal parts. This technique is established based on altering rigid dies by matrices of adjustable punch elements. In this paper, the basic principle of this technique is implemented on deep drawing process. A reconfigurable die was constructed to investigate the multi-point deep drawing process. AA 2024-O Aluminum alloy was designated as test material. The formed specimens were evaluated in terms of dimpling defect, rupture, thickness distribution and dimensional accuracy. The onset of rupture was predicted by integrating the forming limit diagram of employed material with finite element Code. The predicted results were in a reasonable agreement with the experimental tests. It was found that for complete elimination of dimpling defect and acquiring maximum drawing depth, the proper allocation of elastic layer parameters such as thickness and hardness was crucial. The conducted investigations indicated that, in general, dimensional accuracy of formed parts was acceptable. However, for areas with sharp changes in geometry such as corners and side walls, deviation from desired geometry was evident. This phenomenon was remarkably dominant for manufactured parts utilizing softer elastic layer.     

Construction of vertex-disjoint paths in alternating group networks

The existence of parallel node-disjoint paths between any pair of nodes is a desirable property of interconnection networks, because such paths allow tolerance to node and/or link failures along some of the paths, without causing disconnection. Additionally, node-disjoint paths support high-throughput communication via the concurrent transmission of parts of a message. We characterize maximum-sized families of parallel paths between any two nodes of alternating group networks. More specifically, we establish that in a given alternating group network AN _n , there exist n−1 parallel paths (the maximum possible, given the node degree of n−1) between any pair of nodes. Furthermore, we demonstrate that these parallel paths are optimal or near-optimal, in the sense of their lengths exceeding the internode distance by no more than four. We also show that the wide diameter of AN _n is at most one unit greater than the known lower bound D+1, where D is the network diameter.     

Speeding up learning automata based multi agent systems using the concepts of stigmergy and entropy

Learning automata (LA) were recently shown to be valuable tools for designing Multi-Agent Reinforcement Learning algorithms and are able to control the stochastic games. In this paper, the concepts of stigmergy and entropy are imported into learning automata based multi-agent systems with the purpose of providing a simple framework for interaction and coordination in multi-agent systems and speeding up the learning process. The multi-agent system considered in this paper is designed to find optimal policies in Markov games. We consider several dummy agents that walk around in the states of the environment, make local learning automaton active, and bring information so that the involved learning automaton can update their local state. The entropy of the probability vector for the learning automata of the next state is used to determine reward or penalty for the actions of learning automata. The experimental results have shown that in terms of the speed of reaching the optimal policy, the proposed algorithm has better learning performance than other learning algorithms.     

Simultaneous state estimation and parameter identification in linear fractional order systems using coloured measurement noise

In the present paper, the identification and estimation problem of a single-input–single-output (SISO) fractional order state-space system will be addressed. A SISO state-space model is considered in which parameters and also state variables should be estimated. The canonical fractional order state-space system will be transformed into a regression equation by using a linear transformation and a shift operator that are appropriate for identification. The identification method provided in this paper is based on a recursive identification algorithm that has the capability of identifying the parameters of fractional order state-space system recursively. Another subject that will be addressed in this paper is a novel fractional order Kalman filter suitable for the systems with coloured measurement noise. The promising performance of the proposed methods is verified using two stable fractional order systems.