Diluted chemical bath deposition of CdZnS as prospective buffer layer in CIGS solar cell

In this study, dilute chemical bath deposition technique has been used to deposit CdZnS thin films on soda-lime glass substrates. The structural, morphological, optoelectronic properties of as-grown films have been investigated as a function of different Zn²⁺ precursor concentrations. The X-ray diffractogram of CdS thin-film reveals a peak corresponding to (002) plane with wurtzite structure, and the peak shift has been observed with the increase of the Zn²⁺ concentration upon formation of CdZnS thin film. From morphological studies, it has been revealed that the diluted chemical bath deposition technique provides homogeneous distribution of film on the substrate even at a lower concentration of Zn²⁺. Optical characterization has shown that the transparency of the film is influenced by Zn²⁺ concentration and when the Zn²⁺ concentration is varied from 0 M to 0.0256 M, bandgap values of resulting films range from 2.42 eV to 3.90 eV while. Furthermore, electrical properties have shown that with increasing zinc concentration the resistivity of the film increases. Finally, numerical simulation validates and suggests that CdZnS buffer layer with composition of 0.0032 M Zn²⁺ concentration would be a promising candidate in CIGS solar cell.     

Smart Edge Computing for 5 g/6 g Satellite IOT for Reducing Inter Transmission Delay

Mobile Networks and Applications - 5G/6G communication are first generation high speed wireless communication network which integrates the aerial data, terrestrial data and maritime data via...     

Design of an Electromagnetic Frequency Tunned Antenna for Mobile Communications

Wireless Personal Communications - Current mobile communications technology relies heavily on efficient design of antennas, where the operational characteristics of the wireless communication...     

Analyzing the determinants of carbon emissions from transportation in European countries: the role of renewable energy and urbanization

Clean Technologies and Environmental Policy - The continuous growth of transport sector and the increase in carbon emissions from transportation attract the attention of policy makers in...     

Influence of Different Additives on the Interaction of Quinolone Antibiotic Drug with Surfactant: Conductivity and Cloud Point Measurement Study

Conductometric and cloud point (CP) measurement studies have been performed to investigate the interaction of tetradecyltrimethylammonium bromide (TTAB) and Triton® X-100 (TX-100) with ciprofloxacin hydrochloride (CFH) in different solvents over the temperature range of 295.15–315.15 K. CFH is used for the treatment of various bacterial infections. The observed critical micelle concentration (CMC) values of TTAB were found to be reduced in the presence of electrolytes (Na₂SO₄/Na₃PO₄), and this reduction proceeds with the elevation of salt concentration. The order of the CMC of TTAB follows the trend: > >. The observed CMC values of TTAB were found to increase with increasing temperature and decrease with increasing concentration of CFH in aqueous medium. The values of Gibbs free energy of micellization () for the TTAB/TTAB + CFH mixture were found to be negative, implying spontaneous micellization. The estimated CP of TX-100 decreases with increasing concentration of TX-100 in aqueous medium. The CP values first decrease with increasing concentration of CFH and then increase at higher concentration of CFH almost in all cases investigated. The values of free energy of clouding were found to be positive in all cases studied implying that phase separation of TX-100 was nonspontaneous. The other thermodynamic parameters associated with the micellization of TTAB and the phase separation of TX-100 were estimated and explained.     

An aldose reductase inhibitor and aminoguanidine prevent vascular endothelial growth factor expression in rats with long-term galactosemia

OBJECTIVE: To study the effects of an aldose reductase inhibitor (ARI-509, Wyeth-Ayerst, Princeton, NJ) and aminoguanidine (AMG), agents that have been reported to prevent or delay diabetic retinopathy, on retinal vascular abnormalities and the immunocytochemical expression in the retina of vascular endothelial growth factor (VEGF) in rats maintained for up to 2 years on a 50% galactose diet. METHODS: Albino rats were placed on a control diet, a diet containing 50% galactose, or the 50% galactose diet containing either ARI-509 or AMG. Treatment with ARI-509 or AMG was initiated at the beginning of the experiment or after 12 months of galactose feeding. After 22 to 24 months, the rats were killed and the retinal vasculature from half of one eye was isolated by trypsin-elastase digestion for semiquantitative evaluation of retinal vascular lesions. The other half of the retina was prepared for immunocytochemistry and stained for the presence of VEGF, factor VIII, vimentin, and glial fibrillary acidic protein. Red blood cells, sciatic nerves, and a portion of the retina from the second eye were assayed for glucose, galactose, fructose, sorbitol, galactitol, and myo-inositol. Red blood cells were also assayed for galactosylated hemoglobin. RESULTS: Galactose-fed animals developed a vascular retinopathy characterized by severe cellular loss in the retinal capillaries and intensification of periodic acid-Schiff staining of the vascular basement membranes. Some animals also displayed dilation and hypercellularity of vessels in the posterior retina. These changes were substantially reduced in animals receiving ARI-509 from the beginning of the galactose diet, but were unaffected in all of the other treatment groups. None of the rats receiving ARI-509 or AMG treatment, whether initiated from the onset or after 12 months of galactosemia, demonstrated VEGF immunoreactivity. With the exception of the animals receiving ARI-509 from the beginning of the experiment, all of the galactose-fed animals developed dense cataracts within 6 weeks of the beginning of the galactose diet. Galactitol levels in animals receiving ARI-509 were 86% to 93% lower in red blood cells, retina, and sciatic nerve than those in the other galactose-fed groups. CONCLUSIONS: Although ARI-509 and AMG have different abilities to delay or prevent the diabetic-like retinopathy in galactosemic rats, even when substantial retinal microvascular acellularity occurs, both drugs prevent the immunocytochemical expression of VEGF. These results suggest that factors other than hypoxia may be responsible for VEGF expression in the retina, and that aldose reductase inhibitors and AMG have potential roles in preventing such expression and, thus, perhaps preventing retinal neovascularization.     

Preparation and properties of novel polyurethane insulating coatings based on glycerin‐terminated urethane prepolymers and blocked isocyanate

Novel polyurethane insulating coatings were prepared from the reaction of glycerin‐terminated polyurethane prepolymers (GPUPs) and a blocked isocyanate curing agent (BIC). The GPUPs were prepared from the reaction of one equivalent of polycaprolactone polyol (CAPA 210) with an excess amount of 4,4′‐methylene bis(phenyl isocyanate) (MDI) and subsequent reaction of the NCO‐terminated polyurethane with glycerin. The BIC was prepared from the reaction of trimethylol propane (TMP), toluene diisocyanate (TDI) and N‐methylaniline (NMA). The polyols and curing agent were characterized by conventional methods while the curing condition was optimized via gel content measurements. The curing kinetics of the polyurethane coating were investigated and the kinetic parameters derived. The crosslink densities of the samples were determined via the equilibrium swelling method, using the Flory–Rehner equation. The relationships between the crosslink density and the electrical, physical, mechanical and dynamic mechanical properties of the coatings were also studied. Copyright © 2005 Society of Chemical Industry     

逆向反射镜光度测量

为了正确评价逆向反射镜的加工质量与使用效果，且将二者有机地统一起来，本文提出应根据测试目的来选择合适的光度测量方法，并进一步分析了不同测试目的将导致测量装置的组成、几何条件（距离，孔径角，工作姿态等）、光度条件（光源色温、稳定性与均匀性，接收器线性、灵敏度与光谱修正等）、测量参数（反光强度系数、逆反射系数、逆亮度系数等）等各不相同。     

Workload Distribution in Fault Simulation

Simulation at the gate level is computationally very expensive.Parallel processing is one technique to reduce simulation time.Possessing knowledge of the distribution of computational activity insimulation can aid in parallelizing it efficiently. We present a newcharacterization of the distribution of the computational workload infault simulation. An empirical analysis shows that the workloaddistribution is circuit specific, and is largely independent of thevector set being simulated. An inexpensive method to predict theworkload distribution is also discussed.