Upgrading of aspen poplar wood oil over HZSM-5 zeolite catalyst

Thermally fractionated components of an oil prepared by the liquefaction of aspen poplar wood have been upgraded using a HZSM-5 zeolite catalyst to yield products rich in benzene, toluene, xylenes and higher molecular weight aromatics. The effect of reactor temperatures on the relative abundance of these products has been studied.     

Vector characterization of photodetectors, photoreceivers, andoptical pulse sources by time-domain pulse response measurements

Deconvolution of measurement system effects from pulse response measurements is demonstrated to yield reproducible, accurate characterization of the impulse response (and vector frequency response) of a photodetector or photoreceiver, as well as the intensity waveform of an optical pulse. Calibration is based on a <3-ps FWHM (full width at half maximum) optical pulse and a 50-GHz 3-dB bandwidth electrical sampling system. Vector characterization of a photodetector/photoreceiver to >40 GHz and an optical pulse source to >30 GHz are demonstrated. Calibration and effects of noise are discussed     

Formal program construction by transformations-computer-aided,intuition-guided programming

Formal program construction by transformations is a method of software development in which a program is derived from a formal problem specification by manageable, controlled transformation steps which guarantee that the final product meets the initial specification. This methodology has been investigated in the Munich project CIP (computer-aided intuition-guided programming). The research includes the design of a wide-spectrum language specifically tailored to the needs of transformational programming, the construction of a transformation system to support the methodology, and the study of transformation rules and other methodological issues. Particular emphasis has been laid on developing a sound theoretical basis for the overall approach     

In-Situ,On-Demand Lubrication System for Space Mechanisms

Many of today's spaceraft have long mission lifetimes. Whatever the lubrication method selected, the initial lubricant charge is required to last the entire mission. Fluid lubricant losses are mainly due to evaporation, tribo-degradation, and oil creep out of the tribological regions.

In the past, several techniques were developed to maintain the appropriate amount of oil in the system. They were based on oil reservoirs (cartridges, impregnated porous parts), barrier films, and labyrinth seals. Nevertheless, all these systems have had limited success or have not established a proven record for space missions.

The system reported here provides to the ball-race contact fresh lubricant in-situ and on demand when the ball bearing is close to failure. The lubricant is stored in a porous cartridge attached to the inner or the outer ring of a ball bearing. The oil is released by heating the cartridge to eject oil, taking advantage of the greater thermal expansion of the oil compared to the porous network. The heating may be activated by torque increases that signal the depletion of oil in the contact. The low surface tension of the oil compared to the ball bearing material is utilized and the close proximity of the cartridge to the moving balls allows the lubricant to reach the ball-race contacts. This oil re-supply system avoided a mechanism failure, reduced torque to an acceptable level, and extended the life of the component.     

Metal recovery from jarosite waste – A resin screening study

Work has been carried out screening hydrometallurgical resins for application in the valorization of industrially produced jarosite. Of the seven resins tested, anion exchange resins performed poorly for valuable metal recovery. Purolite S950+ and S957, along with a strong acid resin, show good extraction properties, but are selective for Fe³⁺ over the other (divalent) metals. Purolite S930+ (iminodiacetic acid-functionalized resin) demonstrates selectivity for Cu²⁺ over Fe³⁺, but poor selectivity for Ni²⁺, Zn²⁺, and Co²⁺. Dowex M4195 (bispicolylamine-functionalized resin) demonstrates promise for extracting metals of value away from a mixed metal pregnant liquor solution (PLS). A three-stage column-based recovery process is proposed for jarosite leachate treatment.     

Numerical simulation for natural convection in vertical channels

The investigation of laminar natural convection in vertical obstructed channels is conducted using an h-adaptive finite element algorithm. The adaptive model uses an L₂ norm based a-posteriori error estimator with a semi-implicit, time-stepping projection technique. The advection terms are treated using an explicit Adams Bashforth method while the diffusion terms are advanced by an implicit Euler scheme. By using the adaptive algorithm, mesh independent studies can be avoided. Results are obtained for thermal and flow patterns including average Nusselt numbers for different parameters (Rayleigh number, aspect ratio and locations of obstructions) in both smooth and obstructed channels.     

Confirmation of the human-pathogenic microsporidia Enterocytozoon bieneusi, Encephalitozoon intestinalis, and Vittaforma corneae in water

Microsporidia, as a group, cause a wide range of infections, though two species of microsporidia in particular, Enterocytozoon bieneusi and Encephalitozoon intestinalis, are associated with gastrointestinal disease in humans. To date, the mode of transmission and environmental occurrence of microsporidia have not been elucidated due to lack of sensitive and specific screening methods. The present study was undertaken with recently developed methods to screen several significant water sources. Water concentrates were subjected to community DNA extraction followed by microsporidium-specific PCR amplification, PCR sequencing, and database homology comparison. A total of 14 water concentrates were screened; 7 of these contained human-pathogenic microsporidia. The presence of Encephalitozoon intestinalis was confirmed in tertiary sewage effluent, surface water, and groundwater; the presence of Enterocytozoon bieneusi was confirmed in surface water; and the presence of Vittaforma corneae was confirmed in tertiary effluent. Thus, this study represents the first confirmation, to the species level, of human-pathogenic microsporidia in water, indicating that these human-pathogenic microsporidia may be waterborne pathogens.     

Liquefaction of aspen poplar wood

Dried and green aspen poplar wood suspended in water containing alkaline catalysts has been converted completely to an oil, water-soluble chemicals and gases if heated for one hour in the presence of carbon monoxide in a rocking batch reactor. Within the ranges of parameters studied: temperature (593—633 K), nominal reaction times (0—1 h), water-to-wood ratio (0.5:1—5:1), catalyst (Na₂CO₃, K₂CO₃, NaOH), amount of catalyst (7.0—12.5 wt %) and initial hydrogen to carbon monoxide ratios (2:1—0:1), the water-to-wood ratio was most important. Oil yields of ?50% with a carbon plus hydrogen content of ?80% and representing a carbon recovery of ?66% were obtained. The higher heats of combustion ranged from 32.2 to 36.0 MJ/kg.