Thin natural gelatin/chitosan nanofibrous scaffolds for retinal pigment epithelium cells

Damage of the retinal pigmented epithelial cells causes various diseases such as age-related macular degeneration in retinal tissue. Nowadays, scientists are attempting to replace lost retinal cells with healthy and efficient cells that provide better conditions for recovering and preventing blindness. In this study, gelatin/chitosan nanofibrous scaffolds with mean diameters of 180?nm were fabricated for subretinal space through electrospinning. Thickness and morphology of the gelatin–chitosan scaffolds were analyzed by scanning electron microscopy (SEM). The results showed that the high rate of degradation, i.e., 90% damage was obtained after 1 month. The cell viability of gelatin/chitosan nanofibers were measured by 3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyltetrazolium bromide assay. The SEM results of cultured RPE on gelatin/chitosan scaffolds showed the appropriate adhesion of cells on the substrate. The results of the identity of RPE cells cultured on the scaffolds indicated that a large number of cells strongly expressed RPE65 and cytokeratin 8/18.     

Residual generation with unknown input observer for linear systems in the presence of unmatched uncertainties

Journal of Mechanical Science and Technology - In this paper, we deal with residual vector generation for fault detection problems in linear systems via unknown input observer (UIO) when the...     

Effect of carbon steel microstructures and molecular structure of two new Schiff base compounds on inhibition performance in 1 M HCl solution by EIS

In this investigation, attempts have been made to study the inhibitive effect of N,N′-ortho-phenylen acetyle acetone imine (S1) and 4-[(3-{[1-(2-hydroxy phenyl) methylidene] amino} propyl] ethanemidol]-1,3-benzenediol (S2) in the concentration range of 50–400 ppm for mild steel with two different microstructures resulted from two different heat treatments (annealed (A) and quenched and tempered (Q&T)) in 1 M hydrochloric acid by ac impedance spectroscopy. The tests were conducted in acid solutions in the absence and presence of different concentrations of S1 and S2 Schiff bases for both microstructures. A sole time constant was observed from Bode-phase angle plots in the presence of inhibitors which reveals that the action of inhibitors is through adsorption on the surface. The charge transfer resistance and inhibition efficiency increases with the increase in Schiff bases concentration for both microstructures. The perlite samples in the absence of inhibitors in 1 M hydrochloric acid indicated slightly less corrosion than martensite ones, which was because of more protective oxide layers. Furthermore in the presence of S1 and S2, these samples showed better adsorption than martensite one. Schiff base S1 showed a better inhibition against corrosion in comparison with S2. Both S1 and S2 adsorbed on steel surface according to a Langmuir adsorption isotherm model. The associated Gibbs free energies for S1 on both microstructures are more than S2.     

Albumin adsorption on Cibacron Blue F3G-A immobilized onto oligo(ethylene glycol)-terminated self-assembled monolayers

Self-assembled monolayers can be tailored with specific ligands to a certain protein and at the same time prevent the non-specific adsorption of other proteins. Cibacron Blue F3G-A (CB-thiol) was successfully immobilized onto tetra(ethylene glycol)-terminated alkanethiol (CB-thiol). The affinity of human serum albumin (HSA) to immobilized Cibacron Blue F3G-A was studied using mixed thiolate self-assembled monolayers on gold with different n-alkyl chain lengths and functional terminal groups (CH₃-; OH- and tetra(ethylene glycol)). Surfaces were characterized using X-ray photoelectron spectroscopy and water contact angle measurements. Albumin adsorption and exchangeability of the adsorbed albumin molecules with other albumin molecules in solution were evaluated using ¹²⁵I-radiolabeled HSA. Competitive adsorption between albumin and fibrinogen to the different self-assembled monolayers (SAMs) was also investigated. Results showed that the incorporation of CB-thiol on the monolayers does not increase the HSA adsorption and reversibility on the SAMs. However, although specific adsorption of HSA to the immobilized Cibacron Blue F3G-A was not demonstrated, the presence of CB-thiol decreases the affinity of fibrinogen to the OH-terminated SAMs.     

Lake Urmia restoration success story: A natural trend or a planned remedy?

Lake Urmia is the second-largest hypersaline lake in the world. There has been a drastic water level drop of 7.2 m from 1995 to 2016. Beginning in October 2013, the Lake Urmia Restoration Plan (LURP) launched a 10-year program. An increase in water level and a relative improvement in Lake Urmia condition has been observed since 2017. It is an undecided and controversial issue whether the recent positive trend of Lake Urmia has been due to the LURP activities or it is a natural contribution of climate factors variations. To shed some light on this issue, we examine three other lakes, adjacent to the Lake Urmia basin, with similar rainfall variability to investigate their status during the same period. Van (Turkey), Mosul, and Tharthar (both in Iraq), are evaluated as well as Lake Urmia. Three decades of remotely sensed data including precipitation ($P$), water level ($\mathit{WL}$), and lake extent ($A$) were considered for the mentioned lakes. A significant correlation was observed between standardized $\mathit{WL}-P$, and $A-P$ over the long-term period, especially for the recent three years ($R$² = 0.63–0.87). We show that the cumulative precipitation in the antecedent months played a major role in the improvement of these lakes' situation but with different time lags (up to 6 months for Van and Mosul lakes and up to 36 months for Lake Urmia and Tharthar lake). These findings could inform the planners of LURP to adopt strategies for achieving a sustainable state of Lake Urmia based on a more realistic outlook.     

One-step synthesis of hematite (α-Fe2O3) nano-particles by direct thermal-decomposition of maghemite

In this research work, α-Fe₂O₃ nano-particles were prepared by direct thermal-decomposition of γ-Fe₂O₃. Precursor powders (γ-Fe₂O₃) were synthesized by wet chemical method at room temperature and then, the precursors were subsequently calcined in air for 1 h at 500 °C. Samples were characterized by thermal gravimetric analysis (TGA), X-ray diffraction (XRD), energy dispersive spectra (EDS), infrared spectrum (IR) and transmission electron microscopy (TEM), respectively. The XRD, EDS, and IR results indicated that the synthesized α-Fe₂O₃ particles were pure. The TEM image showed that the α-Fe₂O₃ nano-particles were spherical and 18 ± 2 nm in size. Magnetic properties have been detected by a vibrating sample magnetometer (VSM) at room temperature. The γ-Fe₂O₃ and α-Fe₂O₃ nano-particles exhibited a super-paramagnetic and weak ferromagnetic behavior at room temperature, respectively. Using the present method, hematite nano-particles can be produced without expensive organic solvent and complicated equipment.     

Soluble soybean polysaccharide/TiO2 nanocomposites: Biological activity,release behavior,biodegradability, and biosafety

This study aimed to produce and characterize eco-friendly SSPS nanocomposites incorporated with various concentrations of TiO₂ nanoparticles (NPs) (1%, 3%, and 7%). The antimicrobial activity of the nanocomposite films against five strains of pathogenic bacteria was examined. Salmonella typhi PTCC 1609 was the most sensitive species to TiO₂ NPs at concentrations equal to the synthetic antibiotic. The migration of TiO₂ to ethanol and acetic acid, as two food simulants increased when the initial nano-TiO₂ content increased. The release profiles for TiO₂ in two simulants of ethanol and acetic acid indicated a non-Fickian release, and the release kinetics were concentration-dependent. SSPS/TiO₂ nanocomposites degraded easily and thus have the potential to be applied as an eco-friendly packaging system. Oral administration of doses of 1, 12.5, 25, 50, and 75 mg/kg TiO₂ revealed that the dose of 50 and 75 mg/kg increased malondialdehyde (p < .001) concentration in the liver tissue. In addition, it decreased glutathione (p < .001) concentration in the liver tissue.     

Antimicrobial Ionic Liquid-Based Materials for Biomedical Applications

Excessive and unwarranted administration of antibiotics has invigorated the evolution of multidrug-resistant microbes. There is, therefore, an urgent need for advanced active compounds. Ionic liquids with short-lived ion-pair structures are highly tunable and have diverse applications. Apart from their unique physicochemical features, the newly discovered biological activities of ionic liquids have fascinated biochemists, microbiologists, and medical scientists. In particular, their antimicrobial properties have opened new vistas in overcoming the current challenges associated with combating antibiotic-resistant pathogens. Discussions regarding ionic liquid derivatives in monomeric and polymeric forms with antimicrobial activities are presented here. The antimicrobial mechanism of ionic liquids and parameters that affect their antimicrobial activities, such as chain length, cation/anion type, cation density, and polymerization, are considered. The potential applications of ionic liquids in the biomedical arena, including regenerative medicine, biosensing, and drug/biomolecule delivery, are presented to stimulate the scientific community to further improve the antimicrobial efficacy of ionic liquids.     

An entropy-based distance measure for analyzing and detecting metamorphic malware

Metamorphic malware is a kind of malware which evades signature-based anti-viruses by changing its internal structure in each infection. This paper, firstly, introduces a new measure of distance between two computer programs called program dissimilarity measure based on entropy (PDME). Then, it suggests a measure for the degree of metamorphism, based on the suggested distance measure. The distance measure is defined based on the Entropy of the two malware programs. Moreover, the paper shows that the distance measure can be used for classifying metamorphic malware via K-Nearest Neighbors (KNN) method. The method is evaluated by four metamorphic malware families. The results demonstrate that the measure can indicate the degree of metamorphism efficiently, and the KNN classification method using PDME can classify the metamorphic malware with a high precision.