Derivation of a second-order switching surface in the boundary control of buck converters

A second-order switching surface in the boundary control of buck converters is derived in this letter. The formulated switching surface can make the overall converter exhibit better steady-state and transient behaviors than the one with a first-order switching surface. The switching surface is derived by estimating the state trajectory movement after a switching action, resulting in a high state trajectory velocity along the switching surface. This phenomenon accelerates the trajectory moving toward the target operating point. The proposed control scheme has been successfully applied to a 120-W buck converter. The large-signal performance and a comparison with the first-order switching surface have been studied.     

On the capacities of bipartite Hamiltonians and unitary gates

We consider interactions as bidirectional channels. We investigate the capacities for interaction Hamiltonians and nonlocal unitary gates to generate entanglement and transmit classical information. We give analytic expressions for the entanglement generating capacity and entanglement-assisted one-way classical communication capacity of interactions, and show that these quantities are additive, so that the asymptotic capacities equal the corresponding 1-shot capacities. We give general bounds on other capacities, discuss some examples, and conclude with some open questions.     

Classification of audio radar signals using radial basis function neural networks

Radial basis function (RBF) neural networks are used to classify real-life audio radar signals that are collected by a ground surveillance radar mounted on a tank. Currently, a human operator is required to operate the radar system to discern among signals bouncing off tanks, vehicles, planes, and so on. The objective of this project is to investigate the possibility of using a neural network to perform this target recognition task, with the aim of reducing the number of personnel required in a tank. Different signal classification methods in the neural net literature are considered. The first method employs a linear autoregressive (AR) model to extract linear features of the audio data, and then perform classification on these features, i.e, the AR coefficients. AR coefficient estimations based on least squares and higher order statistics are considered in this study. The second approach uses nonlinear predictors to model the audio data and then classifies the signals according to the prediction errors. The real-life audio radar data set used here was collected by an AN/PPS-15 ground surveillance radar and consists of 13 different target classes, which include men marching, a man walking, airplanes, a man crawling, and boats, etc. It is found that each classification method has some classes which are difficult to classify. Overall, the AR feature extraction approach is most effective and has a correct classification rate of 88% for the training data and 67% for data not used for training.     

Reliability investigation of 0.07-/spl mu/m InGaAs-InAlAs-InP HEMT MMICs with pseudomorphic In/sub 0.75/Ga/sub 0.25/As channel

The authors have investigated the reliability performance of G-band (183 GHz) monolithic microwave integrated circuit (MMIC) amplifiers fabricated using 0.07-/spl mu/m T-gate InGaAs-InAlAs-InP HEMTs with pseudomorphic In/sub 0.75/Ga/sub 0.25/As channel on 3-in wafers. Life test was performed at two temperatures (T/sub 1/ = 200 /spl deg/C and T/sub 2/ = 215 /spl deg/C), and the amplifiers were stressed at V/sub ds/ of 1 V and I/sub ds/ of 250 mA/mm in a N/sub 2/ ambient. The activation energy is as high as 1.7 eV, achieving a projected median-time-to-failure (MTTF) /spl ap/ 2 /spl times/ 10/sup 6/ h at a junction temperature of 125 /spl deg/C. MTTF was determined by 2-temperature constant current stress using /spl Delta/G/sub mp/ = -20% as the failure criteria. The difference of reliability performance between 0.07-/spl mu/m InGaAs-InAlAs-InP HEMT MMICs with pseudomorphic In/sub 0.75/Ga/sub 0.25/As channel and 0.1-/spl mu/m InGaAs-InAlAs-InP HEMT MMICs with In/sub 0.6/Ga/sub 0.4/As channel is also discussed. The achieved high-reliability result demonstrates a robust 0.07-/spl mu/m pseudomorphic InGaAs-InAlAs-InP HEMT MMICs production technology for G-band applications.     

Traumatic vertebral arterial dissection and vertebrobasilar arterial thrombosis successfully treated with endovascular thrombolysis and stenting

A case of traumatic extracranial vertebral arterial dissection leading to vertebrobasilar thrombosis and respiratory compromise requiring mechanical ventilation was managed with intraarterial thrombolysis and stenting of the vertebral intimal dissection. In contrast to similar, previously reported cases, this critically ill patient made a full recovery, returning to his job as a secondary school teacher.     

Predicting postlaryngectomy voice outcome in an era of primary tracheoesophageal fistulization: a retrospective evaluation

The aim of this study was to investigate the effect of the absence of elongate spermatids (ES) from the rat seminiferous epithelium on the quantitative secretion and synthesis of the three major Sertoli cell secretory proteins--SGP-1, SGP-2 and CP-2. Seminiferous tubules (ST) were isolated (a) from normal 28-day-old rats, in which the most mature germ cell type is the round spermatid, (b) from normal adult rats at stages IX-XIV of the spermatogenic cycle, i.e. after spermiation, or at stages I-V and VI-VIII, when ES are still attached to the Sertoli cell, and (c) at stages VI-VIII from normal adult rats and from rats treated with methoxyacetic acid (MAA) in order to specifically deplete ES at these stages. Two-dimensional SDS PAGE combined with computerized image analysis was used to analyse 35S-methionine-labelled intracellular and secreted proteins. In the case of SGP-1 and SGP-2, almost all of the protein synthesized by ST was secreted. The total amount of both SGP-1 and CP-2 secreted by unstaged ST from immature rats was significantly lower than that secreted by unstaged ST from adult rats. The total amount of SGP-1 and CP-2 secreted by adult ST at stages IX-XIV of the spermatogenic cycle also declined dramatically compared to ST at earlier stages. The proportion of the total CP-2 synthesized by ST which was secreted also declined in all situations in which ES were absent from the seminiferous epithelium. The synthesis of only SGP-2 was changed by ES depletion from ST at stages VI-VIII, which was almost doubled compared to synthesis of this protein by ST from control rats. Our results suggest strongly that the secretion of SGP-1 and SGP-2 is via the constitutive pathway, and that regulation of these two proteins by ES is at the level of protein synthesis. In contrast, the regulation of CP-2 by ES is predominantly at the level of secretion, suggesting that this protein is secreted via a regulated pathway. Our findings add to the evidence showing that ES play a major role in the regulation of Sertoli cell function.     

Kinetic analysis of papaya proteinase omega

Papaya proteinase omega (pp omega) has been purified from dried latex both by immunoaffinity and traditional methods. Kinetic analysis revealed that (1), the pp omega-catalysed hydrolysis of N-benzoyl-L-arginine p-nitroanilide (BApNA) has a lower specificity (kcat/Km) than the same reaction catalysed by papain; (2), the pp omega-catalysed hydrolysis of a tripeptide substrate having phenylalanine at the second position (S2-site) showed a more similar specificity to that catalysed by papain; (3), the significant difference between the two enzymes is that steady state kinetics with both L-BApNA and a tripeptide enables the identification in pp omega of other ionizations affecting binding. The active sites of papain and pp omega can therefore be distinguished by pH-dependence of kcat/Km.     

Cell-mediated immunological responses in cervical and vaginal cancer patients immunized with a lipidated epitope of human papillomavirus type 16 E7

Human papillomavirus (HPV) infection has been causally associated with cervical cancer. We tested the effectiveness of an HLA-A*0201-restricted, HPV-16 E7 lipopeptide vaccine in eliciting cellular immune responses in vivo in women with refractory cervical cancer. In a nonrandomized Phase I clinical trial, 12 women expressing the HLA-A2 allele with refractory cervical or vaginal cancer were vaccinated with four E786-93 lipopeptide inoculations at 3-week intervals. HLA-A2 subtyping was also performed, and HPV typing was assessed on tumor specimens. Induction of epitope-specific CD8+ T-lymphocyte (CTL) responses was analyzed using peripheral blood leukapheresis specimens obtained before and after vaccination. CTL specificity was measured by IFN-gamma release assay using HLA-A*0201 matched target cells. Clinical responses were assessed by physical examination and radiographic images. All HLA-A*0201 patients were able to mount a cellular immune response to a control peptide. E786-93-specific CTLs were elicited in 4 of 10 evaluable HLA-A*0201 subjects before vaccination, 5 of 7 evaluable HLA-A*0201 patients after two vaccinations, and 2 of 3 evaluable HLA-A*0201 cultures after all four inoculations. Two of three evaluable patients' CTLs converted from unreactive to reactive after administration of all four inoculations. There were no clinical responses or treatment toxicities. The ability to generate specific cellular immune responses is retained in patients with advanced cervical cancer. Vaccination with a lipidated HPV peptide epitope appears capable of safely augmenting CTL reactivity. Although enhancements of cellular immune responses are needed to achieve therapeutic utility in advanced cervical cancer, this approach might prove useful in treating preinvasive disease.     

The use of cantilever bridges

Replacement of missing teeth with fixed bridgework often involves producing full crown retainers on teeth on both sides of an edentulous space. Unfortunately, this approach can result in the destruction of much healthy tooth tissue, and the clinician must balance the benefits of replacing missing teeth with the amount of tooth preparation required. Current thinking in restorative dentistry places the preservation of tooth tissue at a premium, and most practitioners are happy to use techniques that embrace this philosophy. Because of this, cantilever bridges have an increasing role in dental practice, where the replacement for a missing tooth or teeth has one or more abutments on only one side of the edentulous space, being unsupported at the other. Cantilever bridges fall into several types, depending on the number of abutments and types of retainers. This article describes the various cantilever bridge designs, considers the biomechanics of these restorations, and provides guidelines for their clinical use.