Fuzzy Multiobjective and Linear Programming Based Management Models for Optimal Land-Water-Crop System Planning

In this article, linear programming and fuzzy optimization models are developed for planning and management of available land-water-crop system of Mahanadi-Kathajodi delta in eastern India. The models are used to optimize the economic return, production and labour utilization, and to search the related cropping patterns and intensities with specified land, water, fertilizer and labour availability, and water use pattern constraints. Due to extreme backwardness of the study area, it has been decided to keep all the three objectives of the linear programming models at the same priority level to obtain the compromised solution in a fuzzy environment that incorporates the imprecision in fuzzy goals and fuzzy constraints. These non-structural models facilitate the conjunctive use of available surface water and groundwater resources. A comparative evaluation along with the benefit-cost ratios of the existing and proposed farming systems is also presented.     

Book review

CLIMATIC FLUCTUATIONS AND WATER MANAGEMENT. by M. A. Abu‐Zeid and A. K. Biswas Butterworth Heinemann, Oxford, 1992, 356 pp, £50.00.     

Identification of pole-like structures from mobile lidar data of complex road environment

Pole-like structures (PLSs) located in road environment are important roadway assets. They play a vital role in road safety inspection and road planning. The use of light detection and ranging (lidar) based mobile mapping technology for mapping of PLSs is an important area of research as it holds the potential for automation. Point cloud data of rural, peri-urban, and urban road environment are used in this study, which pose special challenge in view of the complexity of terrain, unlike well-planned roads, which have been the subject of interest in existing literature for identification of PLSs. A new five-step method is proposed in this article. The first two steps, i.e. ground filtering and voxelization of filtered non-ground points, are used for data size reduction. Next three steps are used to extract PLSs from reduced data. The proposed method was tested on point cloud data of three test sites having different levels of complexities. PLSs including partially occluded pole, tilted pole, pole situated very close to other objects, and vertical pole attached to tilted pole were accurately identified. Average correctness and completeness, respectively of 92.6% and 94.9%, were achieved in three different complex test sites, i.e. urban, peri-urban, and rural sites, respectively. Computation complexity shows that our proposed method delivers fast and computationally efficient solution for identifying the PLSs from volumetric mobile lidar point cloud. Impact of PLSs on road safety and road planning is also addressed for these selected test sites.     

Improved device performance based on crosslinking of poly (3-hexylthiophene)

Diode devices (glass/ITO/polymer/Al) have been fabricated using poly (3-hexylthiophene) (P3HT) crosslinked with two different biaryl crosslinkers. Crosslinking was performed by exposing the thin films with different wt% of crosslinker to UV irradiation and progress of crosslinking was monitored by IR spectroscopy. An increase in hole mobility of two orders of magnitude has been observed after crosslinking.     

Water classification in the Tanshui river basin in Taiwan

This paper is based on a study conducted to assess and classify the Tanshui river in Taiwan, taking into consideration several relevant parameters. The classification was performed using a new approach. First, the current general uses of the river were assessed; classification was then made by river area, and the priority uses of each. Second, existing water quality was assessed using an indexing approach, specifically the River Pollution Index (RPI). This takes into account all relevant pollutant variables, eg DO, BOD, coliform count, etc, to determine the level of water quality at different reaches of the river. Finally, a classification of the Tanshui river based on its existing water quality and specific best usage was made.     

Cracking Force Analysis for Apricot Pit Decortication Based on Mathematical Model of Hertz’s Theory

In decortication of wild apricot pit a mathematical model based on Hertz’s theory of contact stress was developed for the prediction of force required to break the pit. Using pits subjected to a uniaxial compression stress, in their lateral axis between rigid parallel plates, and those propelled to impinge a rigid cylindrical seat along its lateral axis, experimental verification of the model was conducted comparing the theoretical predictions with estimates from the representations of conventional methods employed in pit cracking. Properties including size, shape, and mass, required in the derived model were determined for wild apricot pits. Material stiffness was obtained from the force-deformation curve. Material stiffness obtained was 51.1 × 10⁶ to 46.9 × 10⁶ Nm-1 for different sizes of the pits (12, 11, 10, and <10 mm). The respective ranges of geometric mean diameters were between 16.92–15.05 mm. There was no significant variation of pit sphericity with size of pits. Force prediction from the Hertzian model proposed gave good prediction of cracking force that was not significantly different from that obtained from an impact force decorticator (1.2 kg weight reciprocating with 100 rpm and 30 cm stroke length) and compression force required calculated from a texture analyzer.     

Integrating Remote Sensing and GIS Techniques with Groundwater Flow Modeling for Assessment of Waterlogged Areas

False Colour Composites (FCC's) of IRS-1A LISS-II sensor pertaining to the dates 9th April 1989 and 7th December 1989 are used to delineate the pre-monsoon and post-monsoon surface waterlogged areas in a region around Habibpur sub-distributary bounded by Vaishali branch canal and Gandak river in North Bihar, India for the year 1989 using visual interpretation technique. Also, digital data of IRS-1C LISS-III sensor pertaining to the dates 7th December 1998 and 6th April 1999 are analyzed in a digital image processing software – ERDAS Imagine 8.3.1, to delineate the pre-monsoon and post-monsoon surface waterlogged areas for the year 1998–1999. Further, for the study area, the waterlogging conditions are delineated for the year 1991–1992 using the groundwater flow modeling software package, MODFLOW. The results obtained using satellite remote sensing data and groundwater flow modeling are integrated in a GIS environment in ERDAS Imagine for assessment of the waterlogging areas.