Impact of the anode operating conditions on the liquid water distribution in the cathode gas diffusion layer

Previous experimental results indicate that the humidification conditions at the anode have an impact on the liquid water distribution in the cathode gas diffusion layer. Numerical simulations are developed to reproduce and analyze this effect. Results consistent with the experimental results are first obtained by playing with the partition coefficients of an advanced pore network model computing the liquid water formation and transfer in the cathode gas diffusion layer (GDL) for a large range of operating conditions. Then, a model for the full anode – cathode assembly is developed by combining the pore network model of the cathode GDL and a 1D model describing the heat and water transfer in the various components of the anode-cathode assembly. This enables one to generalize the dry – wet regime diagram introduced in a previous work by incorporating the effect of the humidity condition at the anode.     

Detection of human papillomavirus 16 and 18 DNA in epithelial lesions of the lower genital tract by in situ hybridization and polymerase chain reaction: cervical scrapes are not substitutes for biopsies

Human papillomavirus (HPV) types 16 and 18 in 66 women with histologically documented lesions of the genital tract and 64 control cohorts were investigated. The efficacies of in situ hybridization and polymerase chain reaction (PCR) in detecting HPV 16 and 18 DNA were analyzed. In order to assess the usefulness of replacing biopsies with cervical scrapes, the two samples were compared by PCR. The prevalence rates of HPV infection by PCR were 59.1 and 10.9% in patients and controls, respectively. PCR was three times more sensitive than in situ hybridization (52.6 versus 17.8%). However, the need to improve PCR sensitivity by subsequent dot blot hybridization reduced one of the main advantages of PCR, i.e., expeditious diagnosis. Cervical scrapes were less sensitive than biopsies (13.6 versus 53%), although with four (6.1%) patients with intraepithelial neoplasias, HPV DNA was identified only by means of cervical scraping. We conclude that obtaining biopsy specimens and cervical scraping are complementary sampling procedures.     

2D MODELLING OF DRYING OF POROUS MEDIA: INFLUENCE OF EDGE EFFECTS AT THE INTERFACE.

TThis paper is essentially devoted to the study of the interfacial coefficient problem and to a characterization of the falling rate period.By means of a 2D numerical simulation, it is shown that the falling rate period is characterized by strong humidity heterogeneities at the interface. These heterogeneities affect significantly the interfacial mass transfer coefficient to be used in the traditional ID approach of drying. In this paper. the heterogeneities are due to the coupling between external and internal transfer in a boundary layer flow leading edge region.0ther phenomena that may also cause the occurence of humidity heterogeneities at the interface are discussed.     

Flow profile measurement in microchannel using the optical feedback interferometry sensing technique

The need to accurately measure flow profiles in microfluidic channels is well recognised. In this work, we present a new optical feedback interferometry (OFI) flow sensor that accurately measures local velocity in fluids and enables reconstruction of a velocity profile inside a microchannel. OFI is a self-aligned interferometric technique that uses the laser as both the transmitter and the receiver thus offering high sensitivity, fast response, and a simple and compact optical design. The system described here is based on a commercial semiconductor laser and has been designed to achieve a micrometer-range spatial resolution. The sensor performance was validated by reconstructing the velocity profile inside a circular cross-section flow-channel with 320  $\upmu $ m internal diameter, with a relative error smaller than 1.8 %. The local flow velocity is directly measured, thus avoiding the need for model based profile calculation and uncertainties inherent to this approach. The system was validated by successfully extracting the flow profiles in both Newtonian and shear-thinning liquids.     

An MDA approach to knowledge engineering

This paper proposes an MDA approach to knowledge engineering, centered on the CommonKADS knowledge model. The latter corresponds to the CIM level of MDA whereas PRR, which represents production rules and rulesets, corresponds to the PIM level. The paper explores the mapping between CommonKADS knowledge models and production rules and rulesets based on PRR. Mapping CommonKADS knowledge models into PRR is very useful, due to the fact that the CIM level remains relatively unexplored, despite its key role in MDA. This motivates our choice to focus on the CIM and PIM levels. Furthermore, the mapping between PIM and PSM (i.e. the implementation of production rules in specific rule-based systems) constitutes less of an issue. To map CommonKADS knowledge models into PRR production rules and rulesets, we propose and illustrate a set of transformations. To ease these transformations, we start by grouping elements of the CommonKADS knowledge models into so-called “inference groups”. We propose and illustrate an algorithm that defines these inference groups automatically. The definition of transformations between models (CIM to PIM levels) requires a specific metamodel for CommonKADS as well as a dedicated metamodel for PRR. Unlike PRR, there is no published CommonKADS metamodel. This paper proposes a comprehensive CommonKADS knowledge metamodel. We describe and discuss an example, applying the whole approach.     

Synthesis and testing of cellulose acetate nicotinate as adsorbent for rhodamine B dye

The esterification of cellulose hydroxyl groups with natural carboxylic acids in mild conditions represents an adequate pathway in obtaining cellulose derivatives with different useful properties. In this article, authors report the synthesis of new mixed ester of cellulose and cellulose acetate nicotinate (CAN) , in a homogenous medium using DMF as solvent, cellulose acetate (CA) as starting cellulosic material, and nicotinic acid as an esterification agent in the presence of p-toluenesulfonyl chloride and pyridine. FTIR and NMR techniques were used to prove the binding of nicotinoyl group at free hydroxyl groups of CA. The obtained CAN was electrospun by electrospinning technique to obtain adsorbent ultrafine fibers, evidenced by SEM images, with high specific surface area. Monolayer Langmuir and empirical Leundrich isotherms were used to assess the adsorption capacity for rhodamine B dye of electrospun CAN in comparison with that of electrospun CA used as starting material. Langmuir isotherm led to a better assessment of experimental data suggesting that the adsorption is mainly determined by hydrogen bonds formed between carboxylic OH hydrogen bonding donor and pyridine N hydrogen bonding acceptor. © 2019 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2019 , 136, 47772.     

Co/SiO2 catalysts prepared from Co2(CO)8 for CO hydrogenation into alcohols and hydrocarbons: characterization by magnetic methods and temperature-programmed hydrogenation

The hydrogenation of carbon monoxide over Co/SiO₂ catalysts obtained by reduction of precursors prepared by the reaction of dicobaltoctacarbonyl with silica gives rise to a mixture of alcohols and hydrocarbons. The chain growth probability for hydrocarbon synthesis is similar to that observed over conventional catalysts prepared by the ammonia method (=0.74) with a comparable metal dispersion (metal particle size 4 nm). Alcohol formation yields a smaller chain growth probability (=0.42). Magnetic measurements have shown that in the latter catalyst, small cobalt clusters (1 nm) are likely to be present together with the cobalt particles (4 nm), this observation reconciles apparently conflicting results from the literature. It has been speculated that alcohol formation might be related to the presence of these clusters according to a concerted mechanism. Furthermore, the observation of large amounts of acetates by temperature-programmed hydrogenation, not detected in hydrocarbon selective catalysts, suggests that they may play a role in ethanol synthesis.