Dielectric Properties of Na<Subscript>0.7</Subscript>CoO<Subscript>2</Subscript> and of the Superconducting Na<Subscript>0.3</Subscript>CoO<Subscript>2</Subscript>·1.3H<Subscript>2</Subscript>O

We present dielectric properties of ceramic anhydrous Na_0.7CoO₂ and the superconducting Na_0.3CoO₂·1.3H₂O materials. The presence of water which induces superconductivity also may increase the dielectric constant (ε) of the hydrated material. This is consistent with the predicted relationship between the highε and the enhancement ofT _c in highT _c superconductors. The anhydrous sample is porous and the transport is due to some percolation via the pores. The porosity is much higher for the hydrated material and the transport is ionic inside bulk water.     

International surveillance of bloodstream infections due to Candida species: frequency of occurrence and antifungal susceptibilities of isolates collected in 1997 in the United States, Canada, and South America for the SENTRY Program. The SENTRY Participant Group

An international program of surveillance of bloodstream infections (BSIs) in the United States, Canada, and South America between January and December 1997 detected 306 episodes of candidemia in 34 medical centers (22 in the United States, 6 in Canada, and 6 in South America). Eighty percent of the BSIs were nosocomial and 50% occurred in patients hospitalized in an intensive care unit. Overall, 53.3% of the BSIs were due to Candida albicans, 15.7% were due to C. parapsilosis, 15.0% were due to C. glabrata, 7.8% were due to C. tropicalis, 2.0% were due to C. krusei, 0.7% were due to C. guilliermondii, and 5.8% were due to Candida spp. However, the distribution of species varied markedly by country. In the United States, 43.8% of BSIs were due to non-C. albicans species. C. glabrata was the most common non-C. albicans species in the United States. The proportion of non-C. albicans BSIs was slightly higher in Canada (47.5%), where C. parapsilosis, not C. glabrata, was the most common non-C. albicans species. C. albicans accounted for 40.5% of all BSIs in South America, followed by C. parapsilosis (38.1%) and C. tropicalis (11.9%). Only one BSI due to C. glabrata was observed in South American hospitals. Among the different species of Candida, resistance to fluconazole (MIC, > or = 64 microg/ml) and itraconazole (MIC, > or = 1.0 microg/ml) was observed with C. glabrata and C. krusei and was observed more rarely among other species. Isolates of C. albicans, C. parapsilosis, C. tropicalis, and C. guilliermondii were all highly susceptible to both fluconazole (99.4 to 100% susceptibility) and itraconazole (95.8 to 100% susceptibility). In contrast, 8.7% of C. glabrata isolates (MIC at which 90% of isolates are inhibited [MIC90], 32 microg/ml) and 100% of C. krusei isolates were resistant to fluconazole, and 36.9% of C. glabrata isolates (MIC90, 2.0 microg/ml) and 66.6% of C. krusei isolates were resistant to itraconazole. Within each species there were no geographic differences in susceptibility to fluconazole or itraconazole.     

Integral equation analysis for higher order modes and cutofffrequencies of arbitrary profiles

A semianalytical method of analysis for arbitrary weakly guiding circular and noncircular profiles, which has its fundamental basis in perturbation theory and incorporates Green's function and integral equation techniques in a powerful method of analysis possessing extremely high accuracy, is extended to the analysis of higher order modes and cutoff frequencies of arbitrary weakly guiding circular and noncircular profiles. Its accuracy is demonstrated by its application to several weakly guiding profiles, for which the method is found to be extremely accurate (<10^-5%). Furthermore, additional simplifications to the semianalytical method of analysis are presented, which dramatically reduce the number of calculations required for solution     

Equipment and transducer-independent 3D ultrasound in the maxillofacial area

AIM: The use of a new 3D ultrasound system should reduce the drawbacks of former 3D workstations (long image generation time, limited use due to the need for special 3D transducers), so that it is now applicable in daily clinical routine. METHOD: An ultrasound 3D workstation was used based on a pentium PC platform, employing a magnetoelectronic position detection system for spatial reconstruction of conventional 2D B-scan image sequences. RESULTS: Better assessment of topographico-anatomical spatial relationships was achieved when presenting pathological findings, especially in assessing lymph nodes and salivary stones. Pathological processes in the maxillofacial area occurring during a period of five months were visualised. CONCLUSION: The method of 3D reconstruction of standard two-dimensional electronic scans, as presented here, is the first method of its kind enabling applicability in daily clinical routine thanks to rapid imaging. The images can be produced with any ultrasound unit or transducer. First clinical results in maxillofacial surgery clearly show improved diagnostic possibilities although there still room for an improvement of the image quality. The possibility of semi-automatic exact volumetry appears meaningful especially in the investigation of lymph nodes. Integration of colour duplex sonography will further enhance the diagnostic value of this method.     

Electron-beam-induced reduction of Fe in iron phosphate dihydrate,ferrihydrite, haemosiderin and ferritin as revealed by electron energy-loss spectroscopy

The effect of high-energy electron irradiation on ferritin/haemosiderin cores (in an iron-overloaded human liver biopsy), its mineral analogue; six-line ferrihydrite (6LFh), and iron phosphate dihydrate (which has similar octahedral ferric iron to oxygen coordination to that in ferrihydrite and ferritin/haemosiderin cores) has been investigated using electron energy-loss spectroscopy (EELS). Fe L_2,3-ionisation edges were recorded on two types of electron microscope: a 200 keV transmission electron microscope (TEM) and a 100 keV scanning transmission electron microscope (STEM), in order to investigate the damage mechanisms in operation and to establish a methodology for minimum specimen alteration during analytical electron microscopic characterisation. A specimen damage mechanism dominated by radiolysis that results in the preferential loss of iron co-ordinating ligands (O, OH and H₂O) is discussed. The net result of irradiation is structural re-organisation and reduction of iron within the iron hydroxides. At sufficiently low electron fluence and particularly in the lower incident energy, finer probe diameter STEM, the alteration is shown to be minimal. All the materials examined exhibit damage which as a function of cumulative fluence is best fitted by an inverse power-law, implying that several chemical and structural changes occur in response to the electron beam and we suggest that these are governed by secondary processes arising from the primary ionisation event. This work affirms that electron fluence and current density should be considered when measuring mixed valence ratios with EELS.     

Mechanical properties of individual electrospun polymer-nanotube composite nanofibers

Singlewalled carbon nanotube/polyvinylalcohol composite nanofibers were electro-spun onto a silicon surface pre-patterned with trenches. These nanofibers were prepared with different loadings of SWCNTs and had radii between 20 and 40 nm. Individual fiber sections were pinned across the trenches and laterally loaded by an AFM tip to yield mechanical response curves. A simple model was exploited to extract the tensile mechanical properties from the lateral force-displacement data. Depending on the fiber composition, the tensile modulus was found to be between 3 and 85 GPa. In addition we have prepared fibers with tensile strength of up to 2.6 GPa. Such optimised fibers break at strains of ∼4% and exhibit toughness of up to 27 MJ/m³.     

Biologization of Pcl-Mesh Using Platelet Rich Fibrin (Prf) Enhances Its Regenerative Potential In Vitro

Introduction: Resorbable synthetic scaffolds are promising for different indications, especially in the context of bone regeneration. However, they require additional biological components to enhance their osteogenic potential. In addition to different cell types, autologous blood-derived matrices offer many advantages to enhance the regenerative capacity of biomaterials. The present study aimed to analyze whether biologization of a PCL-mesh coated using differently centrifuged Platelet rich fibrin (PRF) matrices will have a positive influence on primary human osteoblasts activity in vitro. A polymeric resorbable scaffold (Osteomesh, Osteopore^TM (OP), Singapore) was combined with differently centrifuged PRF matrices to evaluate the additional influence of this biologization concept on bone regeneration in vitro. Peripheral blood of three healthy donors was used to gain PRF matrices centrifuged either at High (710× g, 8 min) or Low (44× g, 8 min) relative centrifugal force (RCF) according to the low speed centrifugation concept (LSCC). OP-PRF constructs were cultured with pOBs. POBs cultured on the uncoated OP served as a control. After three and seven days of cultivation, cell culture supernatants were collected to analyze the pOBs activity by determining the concentrations of VEGF, TGF-β1, PDGF, OPG, IL-8, and ALP- activity. Immunofluorescence staining was used to evaluate the Osteopontin expression of pOBs. After three days, the group of OP+PRF_Low+pOBs showed significantly higher expression of IL-8, TGF-ß1, PDGF, and VEGF compared to the group of OP+PRF_High+pOBs and OP+pOBs. Similar results were observed on day 7. Moreover, OP+PRF_Low+pOBs exhibited significantly higher activity of ALP compared to OP+PRF_High+pOBs and OP+pOBs. Immunofluorescence staining showed a higher number of pOBs adherent to OP+PRF_Low+pOBs compared to the groups OP+PRF_High+pOBs and OP+pOBs. To the best of our knowledge, this study is the first to investigate the osteoblasts activity when cultured on a PRF-coated PCL-mesh in vitro. The presented results suggest that PRF_Low centrifuged according to LSCC exhibits autologous blood cells and growth factors, seem to have a significant effect on osteogenesis. Thereby, the combination of OP with PRF_Low showed promising results to support bone regeneration. Further in vivo studies are required to verify the results and carry out potential results for clinical translation.