Authenticity green coffee bean species and geographical origin using near-infrared spectroscopy combined with chemometrics

To prevent the adulteration of agricultural resources and provide a solution to enhance the green coffee bean supply chain, authentication using the near-infrared spectroscopy (NIRS) technique was investigated. Partial least square with discrimination analysis (PLS-DA) models combined with various preprocessing methods were built from NIR spectra of 153 Vietnamese green coffee samples. The model combined with the standard normal variate and the first order of derivative yielded excellent performance in predicting coffee species with the error cross-validation of 0.0261. PLS-DA model of mean centre and first-order derivative spectra also yielded good performance in verifying geographical indication of green coffee with the error of 0.0656. By contrast, the predicting abilities of post-harvest methods were poor. The overall results showed a high potential of the NIRS in online authentication practices.     

Fabrication of tungsten oxide photoanode by doctor blade technique and investigation on its photocatalytic operation mechanism

WO₃ is a potential material candidate for construction of photoanode for solar driven water splitting. In this work, μm-thick porous WO₃ photoanode is prepared by depositing a stable ink made of WO₃ nanoparticles and Aristoflex velvet polymer in water using the doctor blade technique, followed by a sintering in air. The nature of WO₃ nanoparticles, its loading mass on F-doped tin oxide electrode as well as sintering temperature are examined in order to optimize the photocatalytic activity of the resultant WO₃ photoanode. The operation of WO₃ photoanode is investigated by varying the light illumination direction and light incident intensity as well as changing the nature of the electrolyte. Dissolved tungsten in electrolyte is quantified by ICP-MS providing insights into the influences of electrolyte nature and operating conditions to the corrosion of WO₃. It is proposed that the H₂O₂ and OH^. radical generated as by-products of the photo-driven water oxidation on the photoanode surface are harmful species that accelerate the dissolution of WO₃.     

Selective Coating of SnS on the Bio‐Inspired Moth‐Eye Patterned PEDOT:PSS Polymer Films

A new strategy for the selective coating of tin sulfide (SnS) on the surface of moth‐eye patterned (MEP) conducting polymer film is studied by considering the optical properties of the antireflective moth‐eye pattern and flexibility of polymer films. The semiconductor SnS is selectively coated on the surface of MEP microdomes of poly(3,4‐ethylenedioxythiophene) poly(styrene‐sulfonate) (PEDOT:PSS) film. The SnS coated MEP film is obtained by using pore selectively SnS thin layer functionalized polystyrene honeycomb‐patterned porous (HCP) film as a template. Aqueous PEDOT:PSS solution is poured on the SnS functionalized HCP films and detached for the fabrication of SnS coated MEP films. The films show a satisfactory photo‐responsive property under solar stimulated light illumination due to the antireflective MEP structure of PEDOT film and homogenous SnS coating on the surface of the conducting polymer.     

Controlling thickness to tune performance of high-mobility transparent conducting films deposited from Ga-doped ZnO ceramic target

Structure modification has been found to tune significantly the transparent-conducting performance, especially mobility and conductivity of hydrogenated Ga-doped ZnO (HGZO) films. The strong correlation between film thickness and mobility of the films is revealed. The mobility increases quickly with increasing the thickness from 350 to 900 nm, and then tends to be saturated at further thicknesses. A higher mobility than 50 cm²/Vs can be achieved, which is an extra-high value for polycrystalline ZnO films deposited by using the sputtering technique. The thickness-dependent mobility originates from scatterings on grain boundaries and dislocation-induced defects controlled by thin-film growth. Based on the Volmer-Weber model, an expansion model is built up to describe the thickness-dependent crystal growth of the HGZO films, especially at the thick films. As a result, the 800 nm-thick HGZO film obtains the highest performance with high mobility of 51.5 cm²/Vs, low resistivity of 5.3 × 10^?4 Ωcm, and good transmittance of 83.3 %.     

Effect of Supports and Promoters on the Performance of Ni-Based Catalysts in Ethanol Steam Reforming

Ethanol steam reforming (ESR) is one of the potential processes to convert ethanol into valuable products. Hydrogen produced from ESR is considered as green energy for the future and can be an excellent alternative to fossil fuels with the aim of mitigating the greenhouse gas effect. The ESR process has been well studied, using transition metals as catalysts coupled with both acidic and basic oxides as supports. Among various reported transition metals, Ni is an inexpensive material with activity comparable to that of noble metals, showing promising ethanol conversion and hydrogen yields. Additionally, different promoters and supports were utilized to enhance the hydrogen yield and the catalyst stability. This review summarizes and discusses the influences of the supports and promoters of Ni-based catalysts on the ESR process.     

Evaluating the mixing performance of a ribbon blender

This paper investigates the effects of processing and equipment parameters of a ribbon blender (i.e. loading method of lubricant, fill level, blade speed and blade design) on magnesium stearate homogeneity. A core sampling technique is used to obtain at least one hundred samples per sampling event, which are extracted throughout the blender and yield a thorough characterization of the entire bed. The results presented here can be used as a guideline to develop appropriate blending processes and characterization protocols for ribbon blenders.     

Coexisting static and flowing regions in a centrifuging granular heap

We report an unexpectedly rich variety of new flow patterns on a granular heap that is centrifuged so as to simulate a reduction in gravity. These surface patterns exhibit coexisting static and flowing regions that depend strongly on centrifugal stress, but surprisingly not on mass flow rate. A discrete cellular automata model reproduces some of the patterning features and indicates that subsurface jamming may precipitate the formation of localized frozen patterns on the surface. This model provides insights into the mechanics of granular flows under controlled stress environment and jammed-to-flowing transitions in granular media.     

On the evaluation of the J-integral by a plastic crack tip element

Two crack tip elements are formulated for a stationary, mode I plastic crack in planar structures using hybrid assumed stress approach, based on the secant modulus and the Newton-Raphson schemes, respectively. The stress distribution in the crack tip element is assumed to be the HRR field superimposed by the regular polynomial terms. The formulated (hybrid) crack tip elements are compatible with the isoparametric element so that they can be used conveniently along with the conventional displacement-based finite elements. The intensity of the HRR stress field, the J-integral, is determined directly from the finite element equations together with the nodal displacements. The dominance of the HRR stress field at the crack tip is pertinent to the present approach, which depends on geometry and loading conditions. Since the J-integral is globally path-independent for nonlinear elastic materials (deformation plasticity model), in order to assess the accuracy and efficiency of the methodology as compared to the contour integration approach, numerical studies of common plane-stress cracked configurations are performed for these materials. The results indicate that for a sufficiently small crack tip element size, J from the present approach correlates well, within 6 percent difference, with that from the contour integration for a wide range of material hardening coefficients if the HRR zone exists at the crack tip. These highly accurate results for J from the crack tip stresses could not be achieved without using (newly) modified variational principles and a refined numerical technique. It should be emphasized that the present methodology also can be applied to cracks in J ₂ flow materials under HRR dominance. In such case, the J integral may not be globally path independent, and hence it now must be determined from the stress and strain fields near the crack tip.     

Population pharmacokinetics of nitroglycerin and of its two metabolites after a single 24-hour application of a nitroglycerin transdermal matrix delivery system

OBJECTIVES: To determine whether oxytocin exists in the cerebrospinal fluid (CSF) of dogs and whether the amount of oxytocin in the CSF of dogs with neck or back pain caused by spinal cord compression is significantly different than that in the CSF of clinically normal dogs. STUDY DESIGN: Prospective controlled study. ANIMAL POPULATION: A total of 15 purpose-bred beagles and 17 client-owned dogs. METHODS: CSF was collected by needle puncture of the cerebellar medullary cistern after induction of general anesthesia. Oxytocin levels within the samples were determined through radioimmunoassay. RESULTS: Dogs with spinal cord compression had significantly more oxytocin in their CSF than the clinically normal dogs (13.76 +/- 2.0 pg/mL and 3.61 +/- 0.63 pg/mL, respectively; P < .0001). Dogs with chronic signs (>7 days) had significantly more oxytocin in their CSF than dogs with acute signs (<7 days) (21.60 +/- 0.86 pg/mL and 6.80 +/- 0.81 pg/mL, respectively; P < .0001). Both acutely and chronically affected dogs had significantly more oxytocin in their CSF than the controls (P < .005 and P < .0001 respectively). CONCLUSIONS: Dogs with neck and back pain caused by spinal cord compression have significantly more oxytocin in their CSF than clinically normal dogs. Dogs with chronic clinical signs have significantly more oxytocin in their CSF than dogs with acute clinical signs. CLINICAL RELEVANCE: In humans, intrathecal injection of oxytocin is effective in treating low back pain for up to 5 hours. Intrathecal oxytocin may be a logical choice for perioperative analgesia in dogs undergoing myelography because the intrathecal space is accessed for injection of contrast agent.