Triggered Updates for Temporal Consistency in Real-Time Databases

A real-time database systemhas temporal consistency constraints in addition to timing constraints.The timing constraints require a transaction to be completedby a specified deadline, and the temporal consistency constraintsrequire that temporal data read by a transaction be up-to-date.If a transaction reads out-of-date data, it will become temporallyinconsistent. A real-time database system consists of differenttypes of temporal data objects, including derived objects. Thevalue of a derived object is computed from a set of other objects,known as the read-set of the derived object. The derived objectmay not always reflect the current state of its read-set; a derivedobject can become out-of-date even if its read-set is up-to-date.Any subsequent transaction reading the derived object will thenbecome temporally inconsistent. In this case, in order to readup-to-date objects, a transaction will have to wait until someother transaction updates the out-of-date object. However, indoing so, the waiting transaction may miss its deadline, particularlyif the update is not periodic but instead arrives randomly. Wepropose to update the outdated objects so that not only is thetemporal consistency improved, but also the number of misseddeadlines does not increase significantly, and as a result thereis an overall improvement in the performance of the system. Wepropose, implement and study a novel approach, to be known astriggered updates, to improve temporal consistency in firm real-timedatabase systems when updates are not periodic. We identify propertiesof triggered updates and explain how they work by giving bothan intuitive and a probabilistic analysis. We present strategiesfor generating triggered updates, discuss their suitability invarious contexts and perform a detailed simulation study to evaluatetheir performance. Results show that it is possible to improvetemporal consistency without degrading the timeliness of real-time database systems to a great deal.     

Selective inhibition of cyclic AMP-dependent protein kinase by isoquinoline derivatives

A large series of isoquinoline derivatives was synthesised including derivatives of isoquinoline, isoquinolino[3,4-c]furazan, 1,2-dihydro-1-oxoisoquinoline, 6-oxopyrimido[1,2-d]isoquinoline, benzo[c][1,8]-naphthyridine, pyrazino[2,3-c]isoquinoline and benzimidazo[2,1-a]isoquinoline as well as further structurally related isoquinoline derivatives and pyrido-2,3-furazans. Representatives of all of these classes of isoquinolines are potent and selective inhibitors of the cyclic AMP-dependent protein kinase (PKA) catalytic subunit (cAK) from rat liver. The most effective cAK inhibitors are a series of 1,3-di-substituted and 1,3,4-tri-substituted isoquinolines (IC50 values 30-50 nM) (compounds A1, A2, A3, A4 and A5) and 2-ethylcarboxy-3-amino-5,6-dihydro-6-oxobenzo[c] [1,8]naphthyridine (E1) (IC50 0.08 microM). Compounds A1-A5 inhibit cAK in a fashion that is competitive with respect to ATP as substrate. The isoquinoline inhibitors A1-A5 are ineffective or very poor inhibitors of wheat embryo Ca(2+)-dependent protein kinase (CDPK) and rat brain Ca(2+)-dependent protein kinase C (PKC), chicken gizzard myosin light chain kinase (MLCK) and potato tuber cyclic nucleotide-binding phosphatase (Pase). E1 is a moderately effective inhibitor of CDPK and PKC (IC50 values 30 and 61 microM, respectively). The bisisoquinoline-1(2H)-one compound B7 inhibits cAK, CDPK, PKC and MLCK (IC50 values 8, 95, 24 and 7 microM, respectively) as does J1 [2-(p-bromophenyl)pyrrolo-[2,3-c]isoquinoline-5(4H)-one] (IC50 values 2, 50, 44 and 7 microM, respectively). The very potent isoquinoline-derived cAK inhibitors found here involve substitution of the N-containing isoquinoline ring system and these inhibitors show high specificity for cAK.     

In vitro model improves the prediction of soil arsenic bioavailability: worst-case scenario

There is a strong interest in developing an in vitro arsenic (As) model that satisfactorily estimates the variability in in vivo relative oral bioavailability (RBA) measurements. Several in vitro tests have been developed, but none is universally accepted due to their limited success in predicting soil As RBA. A suite of amorphous and crystalline solid As phases were chosen, utilizing a worst-case scenario (WCS) that simulated fasting children's gastric solution chemistry. The objectives of this study were to (i) determine the effects of residence time, pH, and solid-to-solution ratio on As bioaccessibility and speciation in the in vitro gastric test; (ii) provide the fundamental basis for an optimized in vitro model constrained by the WCS; and (iii) validate the optimized in vitro test with the in vivo RBA obtained with BALB/c mice. The gastric pH was the only significant (p < 0.05) factor influencing solid As bioaccessibility. Bioaccessible As retained the oxidation state after its release from the solid into the gastric solution. The optimized in vitro model adequately predicted RBA values for a suite of solid As phases typically encountered in soils, with the exception of aluminum-based solids. This study is an excellent starting point for developing an in vitro test applicable to different As-contaminated soils.     

Performance analysis of LiAl0.5Co0.5O2 nanosheets for intermediate-temperature fuel cells

Exploring high conductive materials is still a challenge for high performance intermediate-temperature fuel cells. In this study, two-dimensional LiAl_0.5Co_0.5O₂ (LACO) nanosheets coated by a compatible amorphous LiAlO₂ (LAO) layer are evaluated as proton/Li⁺ conductor electrolyte. The fuel cell in which the LAO-LACO is used as electrolyte could deliver the maximum power output of 1120 mW cm^?2 at 550 °C. The LAO coating enhances not only the ionic conductivity by modifying the space-charge regions, but also improves the LACO's chemical stability and device performance. Kelvin probe force microscopy further detected a local electric field (LEF) built in the LAO-LACO coating confines protons at the interface to transport fast. Such heterostructure with the LEF accelerating mechanism presents a novel approach for developing high-performance intermediate-temperature fuel cells.     

Viscoplastic fluid flow in irregular eccentric annuli due to axial motion of the inner pipe

Fully developed axial laminar flow of viscoplastic Herschel-Bulkley fluids in eccentric annuli between two pipes has been investigated numerically. The pipes are closed at one end and flow is due to the axial motion of the inner pipe. The annuli may be filly open or partially blocked. General non-orthogonal, boundary-fitted curvilinear coordinates have been used to accurately model the irregular annular geometry due to the presence of a flow blockage. A computer code has been developed using a second-order finite-difference scheme. An exponential model for the shear stress, valid for both yielded and unyielded regions of the flow, is used in the computation. The effects of generalized Bingham number, flow behavior index, eccentricity, and blockage height on the pressure gradient or the surge pressure have been studied and the results are presented in dimensionless form. The pressure gradient is found to decrease with increasing eccentricity. For a partially blocked eccentric annulus the pressure gradient is found to decrease with an increase in the blockage height.     

Scratch adhesion and wear failure characteristics of PVD multilayer CrTi/CrTiN thin film ceramic coating deposited on AA7075-T6 aerospace alloy

This study highlights the scratch adhesion failure characterization and tribo-mechanical properties of physical vapor deposited (Cr, Ti) N coating on AA7075-T6 by using magnetron-sputtering technique. The surface morphology, microstructure and chemical composition of CrTi/CrTiN film were inspected by an optical microscope, scanning electron microscope (SEM) incorporated with energy dispersive X-ray spectroscopy (EDX) in addition to focused ion beam milling. The coating to substrate critical load of about 1261 mN was obtained, by employing coating deposition parameters of; DC power (300 W, RF power (200 W)), temperature (300 °C) and nitrogen flow rate (6%). Failure adhesion characteristics exhibited initial arc-tensile cracking followed by chipping and spallation that led to complete coating failure at L_c3. The tribo-mechanical aspects were evaluated by a pin-on-plate reciprocating testing unit, which showed a lower friction coefficient of 0.36 for CrTiN as compared with 0.43 for AA7075-T6. Subsequently, the wear depth was also reduced from 9.5 to 5.9 μm. It was revealed that the wear mechanism for AA7075-T6 was extensive deformation, abrasion and delamination, while the CrTiN exhibited slightly oxidative abrasive wear mode.     

SSD‐enhanced uncoded space‐time labeling diversity

Space‐time labeling diversity (STLD) has been shown to be an efficient technique for improving the bit error rate (BER) performance of an uncoded space‐time coded modulation system. In this paper, signal space diversity (SSD) is incorporated into the uncoded STLD system to further enhance the system BER performance. A tight closed‐form union bound on the BER of the proposed system is derived and is used to optimize the rotation angle of the SSD scheme. Simulation results are used to confirm the theoretical bound derived for the system. The results also show performance gains of approximately 2.0 dB at a BER of 10^?6 and 1.6 dB at a BER 10^?4 from incorporating SSD into the uncoded STLD system using 16QAM and 64QAM, respectively. Furthermore, a low complexity detection scheme based on orthogonal projection is formulated for the proposed scheme and, in comparison with the optimal maximum‐likelihood detector, is shown to result in a 56% and 95% reduction in computation complexity for the 16QAM and 64QAM versions of the proposed system, respectively.     

Study on the mechanical properties,environmental effect,degradation characteristics and ionizing radiation effect on silk reinforced polypropylene/natural rubber composites

Natural silk fiber (20%) reinforced polypropylene (PP) composites were prepared by compression molding. Tensile strength, tensile modulus, bending strength, bending modulus, impact strength and hardness of the prepared composite were found 54.7 MPa, 1826.2 MPa, 58.3 MPa, 3750.7 MPa, 17.6 kJ/m² and 95 shore A, respectively. To improve the biodegradable character of the composite, natural rubber (NR) was blended (10%, 25%, 50% by weight) with PP. It was found that the mechanical properties of the composite decrease with increasing NR in PP (except IS which increased rather decreasing). Environmental effect on the composite and degradation in various media were investigated in this study. Gamma radiation was used to increase the mechanical properties of the prepared composites. Increase in TS and BS were maximum at 250 krad dose for silk fiber/PP, silk fiber/PP:NR (90:10), silk fiber/PP:NR (75:25) and silk fiber/PP:NR (50:50) composites.     

Symbol error rate calculation and data pre‐distortion for 16‐QAM transmission over nonlinear memoryless satellite channels

This paper presents a simplified mathematical approach to evaluate the performance of any given circular constellation of 16‐level quadrature amplitude modulation (16‐QAM) in terms of symbol error rate (SER). Following this approach, with the aim to work with memoryless nonlinear satellite channels, a model is derived as a generalized form for both linear and nonlinear channels in the presence of down link additive white Gaussian noise (AWGN). The analysis provides means to calculate the optimal ring ratio (RR) and phase difference (PD) for several possible candidates of 16‐QAM circular constellations. The effects of RR and PD on the SER performance are investigated in the analysis. To overcome the nonlinear distortion, data pre‐distortion is taken into account in the study. The paper gives a general procedure for data pre‐distortion implementation for all circular 16‐QAM constellations. The analytical formulation has been extended for total degradation (TD) performance measure as a function of input back‐off (IBO) of the nonlinear amplifier. A SER performance‐comparison between different constellations for 16‐QAM systems has also been presented in this paper. The analytical results are validated by simulation. Copyright © 2006 John Wiley & Sons, Ltd.     

Resource efficient network design and traffic grooming strategy with guaranteed survivability

In WDM networks, path protection has emerged as a widely accepted technique for providing guaranteed survivability of network traffic. However, it requires allocating resources for backup lightpaths, which remain idle under normal fault-free conditions. In this paper, we introduce a new design strategy for survivable network design, which guarantees survivability of all ongoing connections that requires significantly fewer network resources than protection based techniques. In survivable routing, the goal is to find a Route and Wavelength Assignment (RWA) such that the logical topology remains connected for all single link failures. However, even if the logical topology remains connected after any single link fault, it may not have sufficient capacity to support all the requests for data communication, for all single fault scenarios. To address this deficiency, we have proposed two independent but related problem formulations. To handle our first formulation, we have presented an Integer Linear Program (ILP) that augments the concept of survivable routing by allowing rerouting of sub-wavelength traffic carried on each lightpath and finding an RWA that maximizes the amount of traffic that can be supported by the network in the presence of any single link failure. To handle our second formulation, we have proposed a new design approach that integrates the topology design and the RWA in such a way that the resulting logical topology is able to handle the entire set of traffic requests after any single link failure. For the second problem, we have first presented an ILP formulation for optimally designing a survivable logical topology, and then proposed a heuristic for larger networks. Experimental results demonstrate that this new approach is able to provide guaranteed bandwidth, and is much more efficient in terms of resource utilization, compared to both dedicated and shared path protection schemes.