RESERVOIR PROPERTIES OF BARREMIAN – APTIAN URGONIAN LIMESTONES,SE FRANCE,PART 1: INFLUENCE OF STRUCTURAL HISTORY ON POROSITY-PERMEABILITY VARIATIONS

Upper Barremian – Lower Aptian inner platform “Urgonian” limestones in the Mont de Vaucluse region, SE France, consist of alternating metre-scale microporous and tight intervals. This paper focuses on the influence of structural deformation on the reservoir properties of the Urgonian limestone succession in a study area near the town of Rustrel. Petrographic, petrophysical and structural data were recovered from five fully-cored boreholes, from the walls of a 100 m long underground tunnel, and from a 50 m long transect at a nearby outcrop. The data allowed reservoir property variations in the Urgonian limestones to be studied from core to reservoir scale. Eleven Reservoir Rock Types (RRTs) were identified based on petrographic features (texture, grain size), reservoir properties (porosity, permeability), and the frequency of structural discontinuities such as fractures, faults and stylolites. Tight and microporous reservoir rock types were distinguished. Tight reservoir rock types were characterised by early cementation of intergranular pore spaces and by the presence of frequent structural discontinuities. By contrast microporous reservoir rock types contained preserved intragranular microporosity and matrix permeability, but had very few structural discontinuities. Observed vertical alternations of microporous and tight rock types are interpreted to have been controlled by the early diagenesis of the Urgonian carbonates. Deformation associated with regional-scale tectonic phases, including Albian – Cenomanian “Durancian” uplift (∼105 to 96 Ma) and Pyrenean compression (∼55 to 25 Ma), resulted in the modification of the initial petrophysical properties of the Urgonian limestones. An early diagenetic imprint conditioned both the intensity of structural deformations and the associated circulations of diagenetic and meteoric fluids. Evolution of the Reservoir Rock Types is therefore linked both to the depositional conditions and to subsequent phases of structural deformation.     

Defining Dry Eye from a Clinical Perspective

Over the past decades, the number of patients with dry eye disease (DED) has increased dramatically. The incidence of DED is higher in Asia than in Europe and North America, suggesting the involvement of cultural or racial factors in DED etiology. Although many definitions of DED have been used, discrepancies exist between the various definitions of dry eye disease (DED) used across the globe. This article presents a clinical consensus on the definition of DED, as formulated in four meetings with global DED experts. The proposed new definition is as follows: “Dry eye is a multifactorial disease characterized by a persistently unstable and/or deficient tear film (TF) causing discomfort and/or visual impairment, accompanied by variable degrees of ocular surface epitheliopathy, inflammation and neurosensory abnormalities.” The key criteria for the diagnosis of DED are unstable TF, inflammation, ocular discomfort and visual impairment. This definition also recommends the assessment of ocular surface epitheliopathy and neurosensory abnormalities in each patient with suspected DED. It is easily applicable in clinical practice and should help practitioners diagnose DED consistently. This consensus definition of DED should also help to guide research and clinical trials that, to date, have been hampered by the lack of an established surrogate endpoint.     

Morphology development in polymer blends

The major morphological changes during polymer blending occur during the initial softening stage. This work explains the evolution of phase morphology of polymer blends from pellets to submicron particles in a co-rotating twin-screw extruder. The extruder was opened and blend samples were taken along its length. The major phase component was extracted by means of a selective solvent so that the dispersed phase morphology could be viewed directly by using scanning electron microscopy. The two systems studied were 80:20 polystyrene/amorphous polyamide and 80:20 polystyrene/polypropylene. In both systems, the initial morphology consisted of sheets of dispersed phase. Holes form in the sheets, and these holes grow as a result of interfacial tension forces until they coalesce with each other, forming thin ligaments. These fluid ligaments are unstable and break up via mixer shear forces. Very large changes in dispersed phase size are observed during the softening stage. The particle size changes less after the polymers are completely melted. The extruder results are compared to results from a batch mixer. The same dispersed phase sheeting mechanism is seen in the initial morphology in the batch mixer and the breakup of the dispersed phase domains parallels the breakup seen in the extruder.     

Prediction of mean square radius of gyration of tree-like polymers by a general kinetic approach

This paper describes a kinetic method to predict the z-average molecular mean square radius of gyration of tree-like polymers formed by irreversible reactions, assuming Gaussian chains. It is based on the population balance equations for the two-sided molecular distributions of pendant chains associated with every chemically distinguishable kind of bonds. An automated method for the solution of those equations is valid both before as well as after gelation for complex kinetic schemes. Examples of its use are presented with polycondensation systems leading to hyperbranched polymers, the anionic polymerization of mono- and divinyl monomers and a radical polymerization with terminal branching and transfer to polymer.     

Spiral growth mechanisms in partially melted bulk YBa2Cu3O7−δ

Large domains with platelets almost parallel to each other were obtained in bulk YBa₂Cu₃O_7– by a single-step partial melting procedure. The mechanisms of nucleation and growth of platelets are discussed. The nucleation of peritectic material from the liquid phase is favoured by heterogeneities in the melt. Experimental evidence of spiral growth of the nuclei in the [0 0 1] direction is given. Furthermore, structures of growth, which could also be an indication of spiral growth in the [0 1 0]/[1 0 0] directions, are shown. The final morphology of the domains can be explained on the basis of the periodic bond chain (PBC) theory if the growth rates of flat (F) faces of the platelets are dominated by kinetic coefficients which differ between them. The morphology of the as-grown (0 0 1) surface is explained in the framework of the PBC theory with the shape of the steps of macrospirals governed by the transition from roughness to smoothness of the liquid-solid interface. An account of large step heights is given by the model of giant screw dislocations caused by an impurity-induced lattice-constant gradient. Even higher step heights are correlated to the presence of obstacles and lack of liquid phase.