Heat Generation in Multilayer Piezoelectric Actuators

Multilayer piezoelectric actuators when driven under high frequency, generate significant heat, which influences the reliability and other piezoelectric properties. In this paper, heat generation in various types of multilayer PZT-based actuators was studied. Experimental results showed that heat generation is mainly caused by ferroelectric hysteresis loss in the stress-free state. A simplified analytic method was established to evaluate the temperature rise, which is useful for the design of multilayer and other high-power actuators.     

Intrinsic Elastic, Dielectric, and Piezoelectric Losses in Lead Zirconate Titanate Ceramics Determined by an Immittance-Fitting Method

The material coefficients of "soft" and "hard" lead zirconate titanate (PZT) ceramics were determined as complex values by the nonlinear least-squares-fitting of immittance data measured for length-extensional bar resonators. The piezoelectric d -constant should be a complex value to obtain a best fitting between observed and calculated results. Because the elastic, dielectric, and piezoelectric losses determined in this process were not "intrinsic" losses, a calculation process to evaluate the "intrinsic" losses was proposed. It was confirmed that the intrinsic losses were smaller than the corresponding extrinsic losses. The intrinsic piezoelectric loss existed in both soft and hard PZTs; ∼50% of the loss of piezoelectric d -constant was derived from the elastic and dielectric losses. The most notable difference between the soft and hard PZTs was observed in their elastic losses.     

Efficiency and polarization performance of a multilayer-coated laminar grating in the 6.5-6.9-nm wavelength region

We applied a Mo/B4C multilayer coating to a laminar holographic grating with 2400 grooves/mm and a 1-m radius of curvature. By use of synchrotron soft x rays the multilayer-coated grating was evaluated to have diffraction efficiencies of 3.1% and 0.017% for s- and p-polarized radiation, respectively, at a 6.7-nm wavelength at a 45.35 degrees grazing angle of incidence in the +1 (inside) grating order. Thus the polarizance was estimated to be 98.9% at least. The zero-order peak was suppressed by the destructive interference caused by the groove profile.     

A torsional transducer through in-plane shearing of paired planar piezoelectric elements

A torsional microtransducer for high-power applications was developed using standard bulk lead zirconium titantate (PZT) placed upon a small rectangular prism made from phosphor bronze, with a tapered conical end serving as a horn and a machined interior to improve the actuator's response. Torsion was obtained from a prototype at the design frequency of 192 kHz as well as over a wide range of frequencies from 136 kHz to 1.02 MHz. Torsional vibration velocities of 335 mm/s at 192 kHz were measured at 27.3 V(RMS) on the 1.5-mm diameter output tip, amounting to 25,600 degree/s vibration velocity along the outer circumference of the tip. At 1.02 MHz, a torsional vibration velocity of 1750 mm/s (134,000 degree/s) at 17.8 V(RMS) was obtained through use of the thickness mode of the PZT elements. Using the design described in this study, high-power torsional transducers with diameters of 5 mm and below are now possible.     

A single-element tuning fork piezoelectric linear actuator

This paper describes the design of a piezoelectric tuning-fork, dual-mode motor. The motor uses a single multilayer piezoelectric element in combination with tuning fork and shearing motion to form an actuator using a single drive signal. Finite-element analysis was used in the design of the motor, and the process is described along with the selection of the device's materials and its performance. Swaging was used to mount the multilayer piezoelectric element within the stator. Prototypes of the 25-mm long bidirectional actuator achieved a maximum linear no-load speed of 16.5 cm/s, a maximum linear force of 1.86 N, and maximum efficiency of 18.9%.     

A Nifedipine Coground Mixture with Sodium Deoxycholate. II. Dissolution Characteristics and Stability

Nifedipine is a poorly water soluble drug that demonstrates low bioavailability. In a previous study, a coground mixture of nifedipine with sodium deoxycholate (DCNa), a bile salt, immediately produced colloidal particles when dispersed in water. In this study, the effect of the weight fraction of DCNa, grinding time, dissolution media, and storage conditions on colloidal particle formation in solution was investigated. The coground mixture was prepared with a vibration rod mill, and its solid state was characterized using powder X-ray diffraction. A laser diffraction particle size analyzer was used to determine the particle size distribution curve in water. The size of particles formed in solution decreased with an increase in the weight fraction of DCNa and grinding time. A nifedipine-DCNa (1 : 2 w/w) mixture coground for 30 min was used in the experiments. Colloidal particle formation from the coground mixture was also observed in dissolution media of water and a pH 6.8 buffer solution at 37°C. Most precipitates passed through a filter with a pore size of 0.8 μm, but the particle size distribution in water was different from that in the pH 6.8 buffer solution. DCNa exhibited not only micellar solubilization for drug crystals, but also a retarding effect on drug crystal growth in a supersaturated solution. The latter effect could serve to form colloidal particles in solution. When stored under 75% relative humidity at 40°C for 1 month, the amorphous coground mixture crystallized, and the particle size in water markedly increased. Therefore, the weight fraction of DCNa, grinding time, dissolution media, and humidity during storage influence the dissolution characteristics of nifedipine from a coground mixture.     

Control of nano-sized interlayer space of lamellar vanadyl benzylphosphate

Nano-sized interlayer space of lamellar vanadyl benzylphosphate was controlled by water content in starting solution. Depending on the water content, three types of lamellar vanadyl benzylphosphate having basal spacings of 1.4 nm, 1.9 nm and 2.3 nm were obtained. It was suggested that the difference in the concentrations of benzyl and hydroxyl groups in the interlayer leads to the variation of the interlayer space.     

Shrunk multiline addressing method in a passive‐matrix‐driven liquid powder display

Abstract— A shrunk multiline addressing method (SMLA) in a passive‐matrix‐driven liquid powder display will be discussed. An algorithm to generate SMLA data that effectively reduces the number of scanning lines has been devised. The update time is reduced by 44.5% on average, and this reduction is maintained despite increased sizes of the images. The SMLA data generated by this algorithm is applied to e‐paper panels, thereby confirming the reduction in update time and that the image quality of the panels driven by SMLA is equal to that of conventionally driven ones.     

Block Copolymer Permeable Membrane with Visualized High‐Density Straight Channels of Poly(ethylene oxide)

A simple fabrication, scalable to centimeter scale, of a permeable membrane made of block copolymer containing molecular transport channels is demonstrated by coating photo‐crosslinkable liquid‐crystalline block copolymer, consisting of poly(ethylene oxide) (PEO) and poly(methacrylate) (PMA) bearing stilbene (Stb) mesogens in the side chains (PEO₁₁₄‐b‐PMA(Stb)₅₂), onto a sacrificial cellulose acetate film substrate. After thermal annealing, perpendicularly aligned and hexagonally arranged PEO cylindrical domains with a surface density of 10¹¹ cm^?2 were formed and then fixed efficiently by photo‐crosslinking the stilbene moieties in the PMA(Stb) domains by [2 + 2] dimerization. The fully penetrating straight PEO cylindrical domains across the 480‐nm‐thick membrane were well‐defined and visualized as molecule‐transport channels. After exfoliated by removal of the cellulose acetate layer, the membrane could be transferred onto another substrate by either scooping or a horizontal lifting method. Throughout the processes, the fully penetrating PEO channels across the membrane are preserved to open at both ends. A simple permeation experiment demonstrates that rhodamine dyes permeate efficiently through the PEO cylindrical channels of the annealed membrane but not across a non‐annealed one.     

Distributed crossbar architecture for area-efficient combined data/instruction caches with multiple ports

A proposal to improve the low access bandwidth of conventional one-port caches by utilising a multi-bank structure with distributed crossbar to increase port number at small additional area cost is presented. This enables combination of data and instruction caches into a single multi-port cache as well as different wordlength for each port. Through dynamically scheduling the storage space used for data and instructions, 25% smaller storage capacity is sufficient for a given maximum cache-miss probability.