Pomegranate fallen leaves as a source of natural dye for mordant-free dyeing of wool

The application of metal mordants is usually necessary in dyeing of wool with natural dyes to improve the dye exhaustion and fastness properties. The majority of metal salts generally used as mordants are considered as toxic and it is important to find replacements for them. Plant sources with high content of tannins are good candidates as bio-mordant or colourant to overcome this drawback. In this study, the waste fallen leaves of pomegranate tree were used as a source of natural dye for the eco-friendly dyeing of wool fabric without the use of metal mordants. The dyeing process variables including dye concentration, dyebath pH, and temperature were optimised using response surface methodology to obtain the highest colour strength. The colour strength was increased by increasing the natural dye powder up to 100%owf while the optimum pH and dyebath temperature were 4 and 100°C, respectively. The sample dyed under the optimal condition exhibited good fastness properties against washing and light. This study approved the potential of Punica granatum fallen leaves for the dyeing of wool without any mordant, while high fastness properties were obtained.     

EATMR: an energy-aware trust algorithm based the AODV protocol and multi-path routing approach in wireless sensor networks

Telecommunication Systems - Queueing models play a significant role in analysing the performance of power management systems in various electronic devices and communication systems. This paper...     

The application of internet of things in healthcare: a systematic literature review and classification

Universal Access in the Information Society - The Internet of Things (IoT) is an ecosystem that integrates physical objects, software and hardware to interact with each other. Aging of population,...     

Numerical simulation of the impact of polymer rheology on polymer injectivity using a multilevel local grid refinement method

Polymer injectivity is an important factor for evaluating the project economics of chemical flood, which is highly related to the polymer viscosity. Because the flow rate varies rapidly near injectors and significantly changes the polymer viscosity due to the non-Newtonian rheological behavior, the polymer viscosity near the wellbore is difficult to estimate accurately with the practical gridblock size in reservoir simulation. To reduce the impact of polymer rheology upon chemical EOR simulations, we used an efficient multilevel local grid refinement (LGR) method that provides a higher resolution of the flows in the near-wellbore region. An efficient numerical scheme was proposed to accurately solve the pressure equation and concentration equations on the multilevel grid for both homogeneous and heterogeneous reservoir cases. The block list and connections of the multilevel grid are generated via an efficient and extensible algorithm. Field case simulation results indicate that the proposed LGR is consistent with the analytical injectivity model and achieves the closest results to the full grid refinement, which considerably improves the accuracy of solutions compared with the original grid. In addition, the method was validated by comparing it with the LGR module of CMG_STARS. Besides polymer injectivity calculations, the LGR method is applicable for other problems in need of near-wellbore treatment, such as fractures near wells.     

Effect of preparation and operation conditions on the catalytic performance of cobalt-based catalysts for light olefins production

Cobalt-based catalysts were prepared by precipitation method. This research investigated the effects of different supports cobalt loading, promoters, loading of promoters and calcination conditions on the catalytic performance of cobalt catalysts for Fisher-Tropsch synthesis (FTS). It was found that the catalyst containing 40 wt.% Co/TiO₂ promoted with 6 wt.% Zn was an optimal catalyst for the conversion of synthesis gas to hydrocarbons especially light olefins. The activity and selectivity of optimal catalyst were studied in different operational conditions. The results showed that the best operational conditions were the H₂/CO = 2/1 molar feed ratio at 240 °C and GHSV = 1100 h⁻¹ under atmospheric pressure. Characterization of catalysts were carried out by using X-ray diffraction (XRD), thermal gravimetric analysis (TGA), hydrogen temperature program reduction (H₂-TPR), N₂ physisorption measurements such as Brunauer-Emmett-Teller (BET) and Barrett-Joyner-Halenda (BJH) methods.     

A note on using revealed comparative advantages in scientometrics studies

Scientometrics - In recent years, revealed comparative advantage (RCA) index has been widely considered by researchers in all fields of science. This index, which was introduced by Ballassa, is an...     

Correction to: EATMR: an energy-aware trust algorithm based the AODV protocol and multi-path routing approach in wireless sensor networks

Telecommunication Systems -     

Comprehensive Understanding of Urban Water Supply Management: Towards Sustainable Water-socio-economic-health-environment Nexus

Water Resources Management - The majority of the cities across the developing countries have saddled water supply and quality management issues. Unfortunately, even cities with adequate water...