Ferromagnetic nano model study for the peristaltic flow in a plumb duct with permeable walls

Microsystem Technologies - The purpose of the present enquiry is to analyse the mechanics of an incompressible fluid, with water as base fluid, through a radially symmetric plumb duct with...     

Undersea optical stationkeeping: Improved methods

Submersibles require the capability to accurately maintain their position when they are observing, photographing, or working at a site. The most direct way for an ROV or AUV to maintain position in the near bottom environment is to track or lock onto stationary objects on the ocean floor. A particular advantage of an optical stationkeeping system is its ability to use natural rather than manmade beacons. Several improvements to our previously reported optical flow methods for the detection of vehicle motion have been investigated. Experimental results indicate that an adaptation of Newton-Raphson search combined with the use of a low-noise, high accuracy camera can drastically reduce the number of image points at which computations need be made. Other experiments with an algorithm, which accounts for illumination variations that one may encounter in undersea environments, show significant improvement in the estimation of optical flow and vehicle motion.     

An integral theorem prover and the role of proof planning

An investigation is made into the ways proof planning can enhance the capability of a rule based prover for the theory of integration. The integrals are of the Riemann type and are defined in a way to maximize the theorem proving methods of predicate calculus. Approximately fifty theorems have been proved and several examples are discussed. A major shortcoming was found to be the inability of the system to work with or produce a proof plan. As a result, a planning scheme based on the idea of subgoals or milestones was considered. With user defined plans, there was a substantial increase in performance and capability of the system and, in some cases, proofs which were previously unsuccessful were completed.     

Mutual impedance between skewed patch antennas

This paper considers the mutual impedance between skewed rectangular microstrip patch antennas as a function of the skew angle. The analysis is done using the exact Green's function for the patch and the method of moments to solve for the field. The theoretical results obtained are compared with published experimental results     

A microwave Gaussian-beam launcher with an active aperture-blockageto control the spot-size of the beam

A method of controlling the spot-size of a focused microwave Gaussian-beam using an active aperture-blockage is described. The Gaussian-beam launcher consists of an open-ended scalar-horn with a dielectric hyperhemisphere at its aperture. Also included is an AgI-pellet at the aperture-center with a provision to heat it with an external dc source. The scalar-horn plus the dielectric lens launch a Gaussian-beam; and, the AgI pellet when heated, becomes a superionic conductor offering an aperture-blockage. This results in a variation of the spot-size of the emergent-beam. Theoretical results and experimental data are furnished and compared     

Synthesis and characterization of novel diimide–dinaphthols and resulting poly(urethane–imide)s

Novel diols containing imide groups were prepared via condensation of aromatic dianhydrides with 5‐amino‐1‐naphthol. The diimide–dinaphthols prepared were characterized by conventional methods and used to synthesize new poly(urethane–imide)s (PUIs). All the polymers were characterized and their physical properties, such as solubility, solution viscosity, thermal stability, and thermal behaviour were studied. The polymers obtained showed more thermal stability than typical polyurethanes because of the presence of the imide groups. Copyright © 2003 Society of Chemical Industry     

Wireless transmission of HD video using H.264 compression over UWB channel

With the technological advancement, entertainment has become revolutionized and the high-definition (HD) video has become an integral feature of our modern amusement system. The demand for wireless transmission of HD video is rapidly rising for its ubiquitous nature, easy installation and relocation. Such wireless transmissions of HD video streams require very high bandwidth. The ultra-wideband (UWB) offers a large bandwidth, and short-range high-speed data transmission at low cost and low power consumption. In this paper, we present the feasibility study to transmit HD video wirelessly using H.264/AVC compression over the UWB communication channel. Simulations are carried out by controlling key H.264/AVC encoder parameters such as, in-loop deblocking filter, group of pictures, and quantization parameter. Based on the analysis, an optimum setting of these parameters is proposed for different bandwidth requirements, as well as acceptable video quality. The bandwidth achieved is restricted between 1.5 and 20?Mbps with a minimum reconstruction quality of 34?dB. The HD bit stream is then transmitted over the UWB communication channel and the demonstration shows that the overall encoder performance is satisfactory with the transmission bit-error-rate (BER) in the range of 10^?5?C10^?8.     

A review of attacks and security approaches in open multi-agent systems

Open multi-agent systems (MASs) have growing popularity in the Multi-agent Systems community and are predicted to have many applications in future, as large scale distributed systems become more widespread. A major practical limitation to open MASs is security because the openness of such systems negates many traditional security solutions. In this paper we introduce and classify main attacks on open MASs. We then survey and analyse various security techniques in the literature and categorise them under prevention and detection approaches. Finally, we suggest which security technique is an appropriate countermeasure for which classes of attack.     

Nonflat surface level pyramid: a high connectivity multidimensional interconnection network

Parallel machines are extensively used to increase computational speed in solving different scientific problems. Various topologies with different properties have been proposed so far and each one is suitable for specific applications. Pyramid interconnection networks have potentially powerful architecture for many applications such as image processing, visualization, and data mining. The major advantage of pyramids which is important for image processing systems is hierarchical abstracting and transferring the data toward the apex node, just like the human being vision system, which reach to an object from an image. There are rapidly growing applications in which the multidimensional datasets should be processed simultaneously. For such a system, we need a symmetric and expandable interconnection network to process data from different directions and forward them toward the apex. In this paper, a new type of pyramid interconnection network called Non-Flat Surface Level (NFSL) pyramid is proposed. NFSL pyramid interconnection networks constructed by L-level A-lateral-base pyramids that are named basic-pyramids. So, the apex node is surrounded by the level-one surfaces of NFSL that are the first nearest level of nodes to apex in the basic pyramids. Two topologies which are called NFSL-T and NFSL-Q originated from Trilateral-base and Quadrilateral-base basic-pyramids are studied to exemplify the proposed structure. To evaluate the proposed architecture, the most important properties of the networks are determined and compared with those of the standard pyramid networks and its variants.     

Cracks coalescence mechanism and cracks propagation paths in rock-like specimens containing pre-existing random cracks under compression

The mechanism of cracks propagation and cracks coalescence due to compressive loading of the brittle substances containing pre-existing cracks （flaws） was modeled experimentally using specially made rock-like specimens from Portland Pozzolana Cement （PPC）. The breakage process of the specimens was studied by inserting single and double flaws with different inclination angles at the center and applying uniaxial compressive stress at both ends of the specimen. The first crack was oriented at 50＆#176; from the horizontal direction and kept constant throughout the analysis while the orientation of the second crack was changed. It is experimentally observed that the wing cracks are produced at the first stage of loading and start their propagation toward the direction of uniaxial compressive loading. The secondary cracks may also be produced in form of quasi-coplanar and/or oblique cracks in a stable manner. The secondary cracks may eventually continue their propagation in the direction of maximum principle stress. These experimental works were also simulated numerically by a modified higher order displacement discontinuity method and the cracks propagation and cracks coalescence were studied based on Mode I and Mode II stress intensity factors （SIFs）. It is concluded that the wing cracks initiation stresses for the specimens change from 11.3 to 14.1 MPain the case of numerical simulations and from 7.3 to 13.8 MPa in the case of experimental works. It is observed that cracks coalescence stresses change from 21.8 to 25.3 MPa and from 19.5 to 21.8 MPa in the numerical and experimental analyses, respectively. Comparing some of the numerical and experimental results with those recently cited in the literature validates the results obtained by the proposed study. Finally, a numerical simulation was accomplished to study the effect of confining pressure on the crack propagation process, showing that the SIFs increase and the crack initiation angles change in this case.