Growth of Al2O3 whiskers by vapour-phase reactions

Needle-like or wool-like Al₂O₃ whiskers can be grown on a substrate by the hydrolysis of aluminium fluoride vapour. Effects of the growth conditions on the morphology of the crystals and growth processes of the whisker were investigated, and the optimum growth condition of whiskers was examined. Adequate vapour pressure conditions of the reactant gases for the growth of the wool-like whisker were found to be . Aluminium oxyfluoride was assumed to be the most probable intermediate species for the growth of Al₂O₃ whiskers. A variety of crystal morphologies are also shown and described with respect to the experimental conditions.     

Sterols of the oyster,Crassostrea virginica

A commericial sample of the oyster,Crassostrea virginica, obtained from Maryland waters of the Chesapeake Bay, contained 31 desmethylesterols and at least eight 4-monomethylsterols. The combined gas liquid chromatography-mass spectra of the minor components showed the presence of 6 unusual sterols, 24-ethylcholest-22-en-3β ol, 4α-methyl-24-ethylcholestan-3β-ol, occelasterol, (24E)-24-propylidene-cholest-5-en-3β-ol, (24ZO-24-propylidene-cholest-5-en-3β-ol, and 24-methylene-cholestanol. The C-24 configuration of 24-ethylcholest-5-enol, 24-methyl-cholesta-5,22-dienol, and 24-ethylcholesta-5,22 dienol were elucidated by 220 MHz nuclear magnetic resonance spectrometry.     

Measurement of self-diffusion coefficients in Li ionic conductors by using the short-lived radiotracer of 8Li

For the effective use of short-lived radioactive beams, soon to be available at the Tokai Radioactive Ion Accelerator Complex, the authors have developed a radiotracer method for diffusion studies in solids. The experimental test was performed by the measurement of the diffusion coefficients of Li in a sample of the compound βLiAl using an α-emitting radiotracer of ⁸Li (T_1/2=0.84 s). It was found that the time-dependent yields of the α particles from the diffusing ⁸Li that was initially implanted in the sample could be used as a measure of the diffusivity of the tracer in a nondestructive way. The method was applied to measure the self-diffusion coefficients of Li in βLiGa, and for investigating how the Li diffusion in the Li ionic conductors is affected by the concentration of atomic defects (i.e., the existence of the atomic vacancies of Li and the defects in Ga sites that are replaced by Li).     

Mammalian Cytochrome P450-Dependent Metabolism of Polychlorinated Dibenzo-p-dioxins and Coplanar Polychlorinated Biphenyls

Polychlorinated dibenzo-p-dioxins (PCDDs) and coplanar polychlorinated biphenyls (PCBs) contribute to dioxin toxicity in humans and wildlife after bioaccumulation through the food chain from the environment. The authors examined human and rat cytochrome P450 (CYP)-dependent metabolism of PCDDs and PCBs. A number of human CYP isoforms belonging to the CYP1 and CYP2 families showed remarkable activities toward low-chlorinated PCDDs. In particular, human CYP1A1, CYP1A2, and CYP1B1 showed high activities toward monoCDDs, diCDDs, and triCDDs but no detectable activity toward 2,3,7,8-tetrachlorodibenzo-p-dioxin (2,3,7,8-tetraCDD). Large amino acids located at putative substrate-recognition sites and the F-G loop in rat CYP1A1 contributed to the successful metabolism of 2,3,7,8-tetraCDD. Rat, but not human, CYP1A1 metabolized 3,3'',4,4'',5-pentachlorobiphenyl (CB126) to two hydroxylated metabolites. These metabolites are probably less toxic than is CB126, due to their higher solubility. Homology models of human and rat CYP1A1s and CB126 docking studies indicated that two amino acid differences in the CB126-binding cavity were important for CB126 metabolism. In this review, the importance of CYPs in the metabolism of dioxins and PCBs in mammals and the species-based differences between humans and rats are described. In addition, the authors reveal the molecular mechanism behind the binding modes of dioxins and PCBs in the heme pocket of CYPs.     

Preparation and Properties of Bi4 − x Nd x Ti3O12 Thin Films by Chemical Solution Deposition

Neodymium-modified Bi₄Ti₃O₁₂, (Bi, Nd)₄Ti₃O₁₂ (BNT) ferroelectric thin films have been prepared on Pt/TiO_x/SiO₂/Si substrates using metal-organic precursor solutions by the chemical solution deposition method. The BNT precursor films crystallized into the Bi layered perovskite Bi₄Ti₃O₁₂ (BIT) as a single-phase above 600C. The synthesized BNT films revealed a random orientation having a strong 117 reflection, whereas non-substituted BIT thin films exhibited a random orientation with strong 00l diffractions. Among Bi_{4 – x}Nd_xTi₃O₁₂ [x = 0.0, 0.5, 0.75, 1.0] thin films, Bi_3.25Nd_0.75Ti₃O₁₂ thin films showed a well-saturated P-E hysteresis loop with the highest P_r (22 C/cm²) and a low E_c (69 kV/cm) at an applied voltage of 5 V. The Nd-substitution with the optimum amount for the Bi site in the BIT structure was effective not only for promoting the 117 preferred orientation but also for improving the microstructure and ferroelectric properties of the resultant films.     

Chromosome translocation induced by the insertion of the URA blaster into the major repeat sequence (MRS) in Candida albicans

Electrophoretic karyotype studies have shown that clinical isolates of Candida albicans have extensive chromosome length polymorphisms. Chromosome translocation is one of the causes of karyotypic variation. Chromosome translocation events have been shown to occur very frequently at or near the major repeat sequence (MRS) on chromosomes. The MRS consists of the repeated sequences RB2, RPS and HOK, and the repeated sequences are considered to be the template for recombination. To investigate which element of the MRS is important for chromosome translocation, we constructed three cassettes, each containing a URA blaster and sequences homologous to one of the repeats, for insertion into the MRS region on the chromosomes. The ura3 strain STN22u2, which shows a stable, standard karyotype, was transformed with each construct. Insertion events with each cassette occurred at almost all chromosomes. Insertion into the RB2 repeat, but not into the RPS repeat, was accompanied by chromosome translocation in some transformants: chromosome translocations between chromosomes R and 7 and chromosomes 1 and 7 were found, as well as deletions of 7A and 7C from chromosome 7. We conclude that the insertion at the RB2 region may initiate chromosome translocation in C. albicans.     

Trace gas measurement with an integrated porous tube collector/long-path absorbance detector

Porous membrane tubes filled with an absorbing solution that change colors upon selective reactions with specific gases provide high sensitivity inexpensive gas sensors. These can be routinely used for ambient monitoring in a fully automated manner. We consider both stopped and continuous flow operations and show the superiority of the stopped flow mode theoretically and experimentally. Light throughput through various membrane tubes is presented, and superior performance of such tubes over Teflon AF is shown. Sensors for NO2 and for O3 were based on Griess-Saltzman and indigotrisulfonate chemistries, respectively. A computer-controlled two-LED absorbance measurement system (one wavelength monitors the signal, the other references the system) that also governs automated reagent refilling was implemented. Sub-parts-per-billion-volume detection limits are attainable within a few minutes for both gases. Comparative data with a commercial UV-photometry-based ozone monitor showed excellent agreement with the response pattern of the present instrument. Low cost, ready applicability to the measurement of different gases by merely changing the light source and chemistry, and high sensitivity makes this instrument attractive for both pedagogic and practical purposes.     

Synthesis and properties of carbons dispersed with α-iron particles from divinylbenzene-vinylferrocene

α-Iron-dispersed carbon was synthesized, through pressure pyrolysis of divinylbenzene-vinylferrocene above 750°C, and by reduction of magnetite-dispersed carbon. Divinylbenzenevinylferrocene copolymer was pyrolysed at 125 MPa above 750°C to yield carbons dispersed with α-iron accompanied by cementite. Magnetite in the carbon matrix was reduced to α-iron after heat treatments at 500°C in a flow of hydrogen. Carbons synthesized by the pressure pyrolysis of divinylbenzene-vinylferrocene at 800°C and 125 MPa contained iron-compound particles up to 200 nm, whereas the median diameter of α-iron particles in the carbon matrix after reduction treatments was 20 nm. α-Iron-dispersed carbon had a Curie temperature of 770°C. The saturation magnetization of iron-dispersed carbon increased with increasing the pyrolysis temperature of divinylbenzene-vinylferrocene copolymer, and reached a constant value of 183 e.m.u.g⁻¹ at 800°C. The saturation magnetization of α-iron-dispersed carbon after the reduction treatment revealed practically the theoretical value of α-iron. Carbons finely dispersed with only α-iron particles were synthesized successfully by reduction of magnetitedispersed carbons.