Investigation on the effectiveness of the repair method 8.3 “Corrosion protection by increasing the electrical resistivity” in chloride-containing concrete Part 2: Chloride redistribution in concrete after application of a system sealing surface protective coating

This DFG-funded research project aimed to gain a better understanding of the mechanisms of the W-Cl repair principle within the framework of fundamental investigations, to contribute to the creation of the necessary basis for a broader application of the repair principle in practice. The focus was on the development of a model to describe the chloride redistribution after the application of a system sealing surface protective coating. On the basis of Fick's second law of diffusion, a mathematical model with a self-contained analytical solution was developed, with the help of which the chloride redistribution after application of a system sealing surface protective coating can be calculated under the idealized assumption of complete water saturation of the concrete. Furthermore, the influence of the dehydration of the concrete, expected as a result of the application of the repair principle W-Cl, on the chloride redistribution was investigated. On the basis of laboratory tests and numerical simulations, material-specific reduction functions were developed to quantify the relationship between the chloride diffusion coefficient and the ambient humidity.     

FULL UNIAXIAL COMPRESSION CURVES FOR PREDICTING SENSORY TEXTURE QUALITY OF COOKED POTATOES

The prediction of six different sensory texture attributes of twenty-seven potato samples based on uniaxial compression curve features and full uniaxial compressions curves is reported. The data set comprised five varieties, sorted in dry matter bins, and sampled at two storage times. The predictions of most of the sensory texture attributes from full compression curves performed better than just using curve features. Furthermore, force-deformation curves are shown to give slightly better predictions than stress-strain curves. For most of the texture attributes better predictions were obtained using uniaxial compression data from raw potato samples as compared to cooked samples. This study is meant to open up a debate on interpreting the information in uniaxial compression curves in relation to sensory texture quality. Multivariate analysis can handle this and can further give insight about where in the curve the information relevant for the predictions of the sensory attributes is found.     

Electrochemical mass transfer between an impinging jet and a rotating disk in a confined system

This paper presents the mass transfer results from an impinging liquid jet to a rotating disk. The mass transfer coefficients were measured using the electrochemical limiting diffusion current technique (ELDCT). Rotational Reynolds number (Re_r) in the range of 3.4 × 10⁴–1.2 × 10⁵, jet Reynolds number (Re_j) 1.7 × 10⁴–5.3 × 10⁴ and non-dimensional jet-to-disk spacing (H/d) 2–8 were taken into consideration as parameters. It was found that the jet impingement resulted in a substantial enhancement in the mass transfer compared to the case of the rotating disk without jet.     

KINETICS FOR LOW TEMPERATURE PYROLYSIS OF BLACK LIQUOR

A kinetic study of pyrolysis of dried black liquor was performed using a Netzsch 429 Thermogravimetric Analyzer. It was found that as conversion increases from 10 to 45% the apparent pyrolysis activation energy for black liquor increases from 77.20 to 112.74 KJ/mol. For black liquor the order of reaction was found to be first-order. The reaction rate constant was found to be 2.12×10⁹ min. These results are in agreement with the data reported by other investigators on biomass pyrolysis.     

Synthesis and characterization of poly(N‐vinyl‐2‐pyrrolidone) grafted sodium alginate hydrogel beads for the controlled release of indomethacin

Graft copolymers of sodium alginate (NaAlg) with N‐vinyl‐2‐pyrrolidone were prepared using azobisisobutyronitrile as initiator. The graft copolymers (NaAlg‐g‐PVP) were characterized with Fourier transform infrared spectroscopy, elemental analysis, and differential scanning calorimetry. Polymeric hydrogel beads of NaAlg and NaAlg‐g‐PVP were prepared by crosslinking method using glutaraldehyde (GA) as a crosslinker in the hydrochloric acid catalyst (HCl) and these beads were used to deliver anti‐inflammatory drug, indomethacin (IM). Chemical stability of the IM after encapsulation into beads was confirmed by FTIR. Preparation conditions of the NaAlg‐g‐PVP beads were optimized by considering the percentage entrapment efficiency, particle size, swelling capacity and their release data. In vitro release studies were performed in simulated gastric fluid (pH 1.2) for the initial 2 h, followed by simulated intestinal fluid (pH 7.4) for 4 h. Effects of GA concentration, exposure time to GA, drug/polymer (d/p) ratio, and concentration of HCl on the release of IM were discussed. It was observed that IM release from the beads decreased with increasing GA concentration and exposure time. IM release also decreases with increasing d/p ratio and HCl concentration. The highest IM release was obtained to be 77% for beads crosslinked with 0.027M GA. Swelling experiments were also performed to compute molecular mass between crosslinks of the beads. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Excavation and support design of the Dicle–Kralkizi water tunnel: an overview

Tunneling projects have their uniqueness in terms of engineering problems. The expertise gained from analyzing these projects establishes a sound basis for future application. This paper conveys experiences gained during the construction and support of the design of the Dicle–Kralkizi water tunnel, Turkey. Tunnel stability problems including overbreaks and surface subsidence are evaluated. An analysis of the breakdowns, factors controlling advance rate and the overall performance of tunnel are covered. The accumulated information presented here is believed to be useful and reliable for a successful tunnel excavation in similar formations.     

Locational analysis for regionalization of Turkish Red Crescent blood services

After a series of earthquakes in 1999, Turkish Red Crescent (TRC) has engaged in a restructuring for all of its activities, including the blood services. Our study on the blood management system had been started as part of this initiative to restructure the blood services and improve both their effectiveness and efficiency. In the current system of TRC, not much consideration has been given to how the locational decisions affect the performance of blood centers, stations and mobile units. In recent years, however, there has been much discussion regarding the regionalization of the blood management system in Turkey. In this study, we develop several mathematical models to solve the location–allocation decision problems in regionalization of blood services. We report our computational results, obtained by using real data, for TRC blood services.     

Prediction of software vulnerability based deep symbiotic genetic algorithms: Phenotyping of dominant-features

The detection of software vulnerabilities is considered a vital problem in the software security area for a long time. Nowadays, it is challenging to manage software security due to its increased complexity and diversity. So, vulnerability detection applications play a significant part in software development and maintenance. The ability of the forecasting techniques in vulnerability detection is still weak. Thus, one of the efficient defining features methods that have been used to determine the software vulnerabilities is the metaheuristic optimization methods. This paper proposes a novel software vulnerability prediction model based on using a deep learning method and SYMbiotic Genetic algorithm. We are first to apply Diploid Genetic algorithms with deep learning networks on software vulnerability prediction to the best of our knowledge. In this proposed method, a deep SYMbiotic-based genetic algorithm model (DNN-SYMbiotic GAs) is used by learning the phenotyping of dominant-features for software vulnerability prediction problems. The proposed method aimed at increasing the detection abilities of vulnerability patterns with vulnerable components in the software. Comprehensive experiments are conducted on several benchmark datasets; these datasets are taken from Drupal, Moodle, and PHPMyAdmin projects. The obtained results revealed that the proposed method (DNN-SYMbiotic GAs) enhanced vulnerability prediction, which reflects improving software quality prediction.

     

Corrosion inhibition of stainless steel by polyaniline,poly(2-chloroaniline), and poly(aniline-co-2-chloroaniline) in HCl

Polyaniline (PANi), poly(2-chloroaniline) (PClANi), and poly(aniline-co-2-chloroaniline) (co-PClANi) films were synthesized by electrochemical deposition on 304-stainless steel (SS) from an acetonitrile solution. The structural properties of these polymer films were characterized by spectroscopic (FTIR and UV–vis) and electrochemical (cyclic voltammetry) methods. Open circuit potential–time (E_ocp–time) curves, potentiodynamic polarization, and electrochemical impedance (EIS) measurements showed that these films have significant protective performance against corrosion of SS in 0.5 M HCl solution. It was found that co-PClANi film has acted as a passivator as well as barrier for cathodic reduction reaction in a similar manner as PANi film. However, PClANi film has behaved only as barrier for corrosion protection of SS in 0.5 M HCl.