Non-destructive testing of rock bolts using guided ultrasonic waves

The research outlined in this paper is aimed at the development of a portable non-destructive testing instrument for evaluating the condition of rock bolts. In applications such as coal mine roof reinforcement, the opportunities for rock bolt inspection are currently limited to destructive techniques such as the pull-out test. It is proposed that guided ultrasonic waves can be used to solve this inspection problem, using a pulse-echo test carried out from the free end of the bolt. Suitable test frequencies have been identified through the use of modelling software, and successful laboratory and site trials have been undertaken. The research has shown that the proposed approach is capable of determining the bolt length, and of identifying major defects such as necking, deformation, and loss of resin encapsulation.     

Developing a comprehensive maltreatment intervention program

A questionnaire was sent to a one in five sample (68 GPs) of General Practitioners (GPs) in Argyll and Clyde Health Board to determine attitudes to standard setting in hypertension and the response rate was 80.7% (55 GPs). Thirty-six GPs (65.4%) stated that they would be interested in sharing care with a consultant who had an interest in the subject and 27 GPs (49.1%) stated that they would be interested in taking part in an educational audit of their hypertensive patients. The results of the study suggest that it would be possible to obtain broad agreement among GPs on standards for diagnosis, treatment and appropriate indications for hospital referral in the management of hypertension but in order to develop consensus further it would be necessary to carry out a more detailed study using a larger cohort of GPs.     

Mitogenic effect of retinoid X receptor agonists in rat liver

Thirty-nine acrylates and methacrylates that had been used in dental resin materials were evaluated by a cytotoxicity test, and the relationships between their structures and cytotoxicity were studied to predict cytotoxic levels of dental resin materials in order to develop new low-toxic resin materials. All the acrylates evaluated were more toxic than corresponding methacrylates. In both the acrylates and methacrylates, a hydroxyl group seemed to enhance cytotoxicity. Dimethacrylates with 14 or fewer oxyethylene chains showed similar cytotoxicity while dimethacrylates with 23 oxyethylene chains showed lower cytotoxicity. The cytotoxicity ranking of monomers widely used in dental resin materials was bisphenol A bis 2-hydroxypropyl methacrylate (bisGMA) > urethane dimethacrylate (UDMA) > triethyleneglycol dimethacrylate (3G) > 2-hydroxyethyl methacrylate (HEMA) > methyl methacrylate (MMA). In acrylates, methacrylates, and ethylmethacrylates with either substituents, the lipophilicity of substituents affected their cytotoxicity, and an inverse correlation between IC50 and logP was observed. These results will be useful in developing new resin materials with low toxic monomer compositions.     

Determining Geographic Vulnerabilities Using a Novel Impact Based Resilience Metric

Various natural and man-made disasters as well as major political events (like riots) have increased the importance of understanding geographic failures and how correlated failures impact networks. Since mission critical networks are overlaid as virtual networks over a physical network infrastructure forming multilayer networks, there is an increasing need for methods to analyze multilayer networks for geographic vulnerabilities. In this paper, we present a novel impact-based resilience metric. Our new metric uses ideas borrowed from performability to combine network impact with state probability to calculate a new metric called Network Impact Resilience. The idea is that the highest impact to the mission of a network should drive its resilience metric. Furthermore, we present a state space analysis method that analyzes multilayer networks for geographic vulnerabilities. To demonstrate the methods, the inability to provision a given number of upper layer services is used as the criteria for network failure. Mapping techniques for multilayer network states are presented. Simplifying geographic state mapping techniques to reduce enumeration costs are also presented and tested. Finally, these techniques are tested on networks of varying sizes.     

Interpretation time of serial chest CT examinations with stacked-metaphor workstation versus film alternator

PURPOSE: Interpretation time of serial staging chest CT cases, which each contained current and previous examinations, with a simple prototype workstation called filmstack was experimentally compared with interpretation time with a film alternator. MATERIALS AND METHODS: The filmstack displayed a "stack" of sections for each examination; user controls allowed rapid selection of preset attenuation windows and both synchronized and unsynchronized scrolling. Eight radiologists were timed as they used the filmstack and the film alternator to interpret four ergonomically complex serial CT cases. RESULTS: All reports dictated on the basis of findings with filmstack and film were of acceptable clinical accuracy. The time to examine a case with filmstack was significantly faster than the time with film, including the time to load and unload the alternator (99% confidence [P = .01]). There was no statistically significant difference in interpretation time between filmstack and prehung film. CONCLUSION: Use of a low-cost stacked CT workstation with a single 1,024 x 1,024 monitor is an effective means of interpreting cases that require comparison of multiple CT examinations.     

Multiple UAV Coalitions for a Search and Prosecute Mission

Unmanned aerial vehicles (UAVs) have the potential to carry resources in support of search and prosecute operations. Often to completely prosecute a target, UAVs may have to simultaneously attack the target with various resources with different capacities. However, the UAVs are capable of carrying only limited resources in small quantities, hence, a group of UAVs (coalition) needs to be assigned that satisfies the target resource requirement. The assigned coalition must be such that it minimizes the target prosecution delay and the size of the coalition. The problem of forming coalitions is computationally intensive due to the combinatorial nature of the problem, but for real-time applications computationally cheap solutions are required. In this paper, we propose decentralized sub-optimal (polynomial time) and decentralized optimal coalition formation algorithms that generate coalitions for a single target with low computational complexity. We compare the performance of the proposed algorithms to that of a global optimal solution for which we need to solve a centralized combinatorial optimization problem. This problem is computationally intensive because the solution has to (a) provide a coalition for each target, (b) design a sequence in which targets need to be prosecuted, and (c) take into account reduction of UAV resources with usage. To solve this problem we use the Particle Swarm Optimization (PSO) technique. Through simulations, we study the performance of the proposed algorithms in terms of mission performance, complexity of the algorithms and the time taken to form the coalition. The simulation results show that the solution provided by the proposed algorithms is close to the global optimal solution and requires far less computational resources.     

Comparisons of computed mobile phone induced SAR in the SAM phantom to that in anatomically correct models of the human head

The specific absorption rates (SAR) determined computationally in the specific anthropomorphic mannequin (SAM) and anatomically correct models of the human head when exposed to a mobile phone model are compared as part of a study organized by IEEE Standards Coordinating Committee 34, Sub-Committee 2, and Working Group 2, and carried out by an international task force comprising 14 government, academic, and industrial research institutions. The detailed study protocol defined the computational head and mobile phone models. The participants used different finite-difference time-domain software and independently positioned the mobile phone and head models in accordance with the protocol. The results show that when the pinna SAR is calculated separately from the head SAR, SAM produced a higher SAR in the head than the anatomically correct head models. Also the larger (adult) head produced a statistically significant higher peak SAR for both the 1- and 10-g averages than did the smaller (child) head for all conditions of frequency and position.     

Resolving Ambiguity: The Effect of Experience on Interpretation of Ambiguous Events in Generalized Social Phobia.

The authors examined the effect of learning on multiple encounters with sources of social ambiguity in individuals with generalized social phobia (GSP). The authors modified G. B. Simpson and H. Kang's (1994) paradigm and presented prime-target word pairs to individuals with GSP and nonanxious controls (NACs) to prime threat and nonthreat meanings of homographs and examine the effect of this priming on later encounters with that homograph. Consistent with previous research, NACs showed faster response latencies naming a target primed by a homograph with the same meaning activated in two successive trials than naming the same target primed by an unrelated word. Furthermore, NACs showed slower response latencies naming a target when a different meaning of the homograph prime was activated in successive trials than naming a target primed by an unrelated word. GSP participants did not show this pattern in learning a nonthreat meaning of a homograph. These results support the hypothesis that a faulty learning mechanism may be involved in social anxiety. (PsycINFO Database Record (c) 2010 APA, all rights reserved)