Influence of Amorphous Grain Boundary Phases on the Superplastic Behavior of 3-mol%-Yttria-Stabilized Tetragonal Zirconia Polycrystals (3Y-TZP)

Amorphous silicate grain boundary phases of varying chemistry and amounts were added to 3Y-TZP in order to determine their influence on the superplastic behavior between 1200° and 1300°C and on the room-temperature mechanical properties. Strain rate enhancement at high temperatures was observed in 3Y-TZP containing a glassy grain boundary phase, even with as little as 0.1 wt% glass. Strain rate enhancement was greatest in 3Y-TZP with 5 wt% glass, but the room-temperature hardness, elastic modulus, and fracture toughness were degraded. The addition of glassy grain boundary phases did not significantly affect the stress exponent of 3Y-TZP, but did lower the activation energy for superplastic flow. Strain rate enhancement was highest in samples containing the grain boundary phase with the highest solubility for Y₂O₃ and ZrO₂, but the strain rate did not scale inversely with the viscosity of the silicate phases. Grain boundary sliding accommodated by diffusional creep controlled by an interface reaction is proposed as the mechanism for superplastic deformation in 3Y-TZP with and without glassy grain boundary phases.     

Investigation of the phase formation wave in the model of solid state amorphization

Computation results of the model of solid state amorphization (SSA) based on a general approach to non-equilibrium phase transitions are reported. The model takes into account the mutual interaction of the structural elements of the amorphous phase via a deformation field. For the experimental parameters, corresponding to semiconductors undergoing amorphization by high-pressure treatment, a family of self-sustaining autowave solutions in the form of a traveling front, a traveling pulse and a series of pulses associated with the traveling front was obtained. The relation of these solutions with the expected morphology of amorphous samples produced by SSA is discussed.     

Ultrasonic shock treatment of welded joints

We develop a method of ultrasonic shock treatment of welded joints. It is shown that ultrasonic shock treatment increases the yield stress and microhardness of welded joints and decreases the probability of fatigue fracture. We study the microstructure of welded joints after ultrasonic shock treatment and propose a theory of accumulation of strains in the process of treatment. Institute of Physics of Metals, Ukrainian Academy of Sciences, Kiev; Institut für Metallkunde, University of Stuttgart, Stuttgart, Germany. Published in Fizyko-Khimichna Mekhanika Materialiv, Vol. 35, No. 5, pp. 71–74, September–October, 1999.     

Anti‐corrosion additive for concrete

The Building Research Institute in Warsaw has developed an organic concrete additive, known as Dikszopt, which is derived from tanning oak extract. Tests, mostly in the laboratory but some in application trials, show that it has a remarkable ability to protect reinforcing steel against corrosion, notably in carbonized concrete. It also appears to improve the consistency of the concrete mix and retard the setting time, as discussed in this article from the Institute.     

Cell‐Selective,Apoptosis‐inducing Rhodium(III) Crown Thiaether Complexes

Half‐sandwich rhodium(III) polypyridyl (pp) complexes with the metal atom capped by the facial crown thiaether 1,4,7‐trithiacyclononane [9]aneS₃ represent a promising class of apoptosis‐inducing potent cytostatic agents. The necrotic damage caused by the complexes is negligible. In vitro cytotoxicity assays with the human cancer cell lines MCF‐7 and HT‐29 and immortalized HEK‐293 cells indicate that the dicationic κ²N(imino) complexes [([9]aneS₃)RhCl(pp)]²⁺ are much more active than monocationic complexes [([9]aneS₃)RhCl₂(L)]⁺ (L=imidazole, CH₃CN). Whereas the κ²N(amino) complex [([9]aneS₃)RhCl(piperazine)]²⁺ is inactive, replacing piperazine with the structurally analogous κ²S (thiaether) ligand 1,4‐dithiane restores cytotoxicity as evidenced by IC₅₀ values in the range 8.1‐11.6 μM . Spectroscopic (CD, UV/Vis, NOESY) and viscosity measurements indicate that the active dppz complex 8 (IC₅₀ values: 4.7–8.9 μM ) exhibits strong intercalative binding towards DNA whereas the even more potent bipyrimidine complex 9 (IC₅₀ values: 0.6–1.9 μM ) causes no alteration of the duplex B conformation. Weaker intercalative binding is observed for the dpq complex 7 . A comparative annexin V–propidium iodide binding assay with lymphoma (BJAB) cells and healthy leukocytes demonstrates that the cytotoxic activity of complex 8 and particularly complex 9 is highly selective towards the malignant cells.     

Changes in cardiac output do not explain the higher rate of myocardial infarction associated with the use of bilevel compared with continuous positive airway pressure

A case of vaginal evisceration resulting from sliding on a water chute is described. The treatment and mechanism of this rare injury are discussed.     

Cytotoxic Rhodium(III) and Iridium(III) Polypyridyl Complexes: Structure–Activity Relationships,Antileukemic Activity,and Apoptosis Induction

Whereas the cytostatic agents mer‐[RhX₃(DMSO)(pp)] (X=Cl, Br; pp=phen, dpq) are considerably more potent than their facial isomers, this order is reversed for the analogous kinetically more inert Ir^III polypyridyl complexes. The complexes induce specific apoptotic cell death in leukemia and lymphoma cells via the intrinsic mitochondrial pathway and cause negligible necrotic damage.

     

Characterization of New PPARγ Agonists: Analysis of Telmisartan’s Structural Components

Telmisartan was originally designed as an AT₁ antagonist but was later also characterized as a selective PPARγ modulator. This study focused on the identification of the essential structural motifs of telmisartan for PPARγ activation activity, elucidating the individual SAR of each different component (shown).

     

Characterization of New PPARγ Agonists: Benzimidazole Derivatives – the Importance of Position 2

Probing SAR : The 1‐(biphenyl‐4‐ylmethyl)‐1H‐benzo[d]imidazole moiety is known to be an essential structural component of telmisartan for PPARγ activation. This study focused on the substituents at position 2 of the benzimidazole in an attempt to optimize PPARγ activation. In particular, the elongation of the alkyl chain and the introduction of an aromatic ring system were studied (shown).