Ensuring reliability in B2B services: Fault tolerant inter-organizational workflows

In the age of Business-to-Business (B2B) collaboration, ensuring reliability of workflows underlying inter-organizational business processes is of significant importance. There are, however, quite a few challenges towards achieving seamless operation. Such challenges arise from heterogeneity in infrastructure and coordination mechanism at participant organizations, as well as time and cost associated with recovery from failure. Our research presents foundations for a reliable scheme for recovery from failure of workflow processes spanning through multiple business entities. First, a system model is adapted from the mobile computing literature that serves to establish the requirements to be enforced by each participating organization. In our model, we adopt the Maximal Sequence Path (MSP) approach from Yoo et al. (Lecture Notes in Artificial Intelligence 2132:222–236, 2001), as a means of decomposing workflows into mobile agent-driven processes that communicate via web services at each organization. This decomposition ensures defining logical points within the dynamics of a workflow instance for locating accurate and consistent states of the system for recovery in case of a failure. Then, a set of algorithms for various business scenarios are developed and presented as practical solutions. These algorithms are shown to create checkpoints such that the system is always in a globally consistent state. As such, these algorithms constitute a set of standards that can be incorporated in business process management suites that support reliable inter-organizational collaboration.     

Effect of animation enhanced conceptual change texts on 6th grade students’ understanding of the particulate nature of matter and transformation during phase changes

In this study, the effect of animation enhanced conceptual change texts (CCT–CA) on grade 6 students’ understanding of the particulate nature of matter (PNM) and transformation during the phase changes was investigated. A quasi-experimental design and one control group (CG, N = 25) and one experimental group (EG, N = 26) were used. While the control group taught traditional instruction, the experimental group received CCT–CA instruction. Two different tests, The Particulate Nature of Matter Concept Test (ParNoMaC) and The Transformation of Matter Statement Test (ToMaSaT), were administered as pretest, posttest and delayed test to collect data. Results indicate that while there is no statistically significant difference between groups in pretest, performance of EG students is greater than the CG ones in posttest and delayed test. And also, the EG students are better in remediating their alternative conceptions related to the PNM and transformations during the phase changes. Based on the study, it is concluded that CCT–CA combination may be effective way to improve students’ understanding of basic science and chemical concepts.     

Microstructure evolution of the Sn–Ag–y%Cu interconnect

The lead free Sn–Ag–y%Cu (y = 0.0, 0.5, 1.0 and 2.0) interconnect interfacial microstructures and the microstructure evolution under thermal treatment (isothermal aging, 150 °C/1000 h) were studied in detail by using surface microetching microscopy and cross section microscopy. The corresponding mechanical and reliability behaviors were evaluated by performing shear test and fracture mode analysis before and after the thermal treatment. The results indicate: (i) The interconnects could have different microstructures and intermetallic compound (IMC), depending on the Cu content. The Cu–Sn IMC could have microstructures that were clusters or protrusion-like, Augustine grass leaf-like, scissor-like, tweezers-like, etc. (ii) Ag₃Sn IMCs were not observed at time zero for any interconnect groups, but they occurred after the aging for all groups. The Ag₃Sn IMC could have different microstructures, again depending on Cu content. For low Cu content, the Ag₃Sn IMCs were granules or nodules; for higher Cu content, Ag₃Sn IMCs were plate-like. (iii) The growth of Ag₃Sn plates was promoted by the growth of Cu–Sn IMCs, but indirectly linked to the Cu content. (iv) High Cu content (1.0 wt% and higher) could degrade the mechanical and reliability performances of the LF interconnect by providing a brittle joint, which was mainly achieved through the substantial growth of Cu–Sn IMCs and Ag₃Sn plates.     

Diagnostic value of determining hemoglobin in cerebrospinal fluid in acute cerebral circulatory disorders

The results of hemoglobin determination in the CSF by the method of fluorescence microscopy in 195 patients speaks in favor of relative diagnostical importance of hemoglobin in the supra fall-out CSF for establishing the character of the stroke. The following circumstances testify to this fact: 1) in an artificial admixture of blood in the CSF in some cases there may be hemolysis of "passing" erythrocytes; 2) in a genuine admixture of blood, tests of hemoglobin in the centrifugate of the CSF may be negative since in some cases the transition of hemoglobin into bilirubin in the subarachmoid space occurs more rapidly than the hemolysis of erythrocytes. Thus, the hemoglobin does not accumulate in the liquid in quantities, sufficient enough to be measured by the existing methods; 3) in a large amount of artificial blood admixture, even without a hemolysis of "passing" erythrocytes the hemoglobin tests in the centrifugate of the CSF may be positive at the expense of hemoglobin of the blood plasma.     

Feature integration across space, time, and orientation.

The perception of a visual target can be strongly influenced by flanking stimuli. In static displays, performance on the target improves when the distance to the flanking elements increases—presumably because feature pooling and integration vanishes with distance. Here, we studied feature integration with dynamic stimuli. We show that features of single elements presented within a continuous motion stream are integrated largely independent of spatial distance (and orientation). Hence, space-based models of feature integration cannot be extended to dynamic stimuli. We suggest that feature integration is guided by perceptual grouping operations that maintain the identity of perceptual objects over space and time. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Contribution of extracellular polymeric substances from Shewanella sp. HRCR-1 biofilms to U(VI) immobilization

The goal of this study was to quantify the contribution of extracellular polymeric substances (EPS) to U(VI) immobilization by Shewanella sp. HRCR-1. Through comparison of U(VI) immobilization using cells with bound EPS (bEPS) and cells with minimal EPS, we show that (i) bEPS from Shewanella sp. HRCR-1 biofilms contribute significantly to U(VI) immobilization, especially at low initial U(VI) concentrations, through both sorption and reduction; (ii) bEPS can be considered a functional extension of the cells for U(VI) immobilization and they likely play more important roles at lower initial U(VI) concentrations; and (iii) the U(VI) reduction efficiency is dependent upon the initial U(VI) concentration and decreases at lower concentrations. To quantify the relative contributions of sorption and reduction to U(VI) immobilization by EPS fractions, we isolated loosely associated EPS (laEPS) and bEPS from Shewanella sp. HRCR-1 biofilms grown in a hollow fiber membrane biofilm reactor and tested their reactivity with U(VI). We found that, when reduced, the isolated cell-free EPS fractions could reduce U(VI). Polysaccharides in the EPS likely contributed to U(VI) sorption and dominated the reactivity of laEPS, while redox active components (e.g., outer membrane c-type cytochromes), especially in bEPS, possibly facilitated U(VI) reduction.     

Investigation of engineering properties for usability of Lefke stone (Osmaneli/Bilecik) as building stone

Lefke stone is a sandstone that has been widely used in mosques, madrasas, churches, and houses as building stone. The geological features and engineering properties of Lefke stone outcropped in the southern part of Osmaneli/Bilecik were investigated in field and laboratory studies. Samples acquired during the fieldwork were tested to determine the physical, mechanical, durability, and hygrothermal properties in the laboratory. The mean physico-mechanical properties of Lefke stone yielded apparent density of 2.38 g/cm³, specific gravity of 2.68 g/cm³, total porosity of 11.26%, 2.93% water absorption by weight, uniaxial compressive strength of 94 MPa, flexure strength of 11.45 MPa, a 3.90 MPa point load strength, 4.5–5 Mohs hardness, and field Schmidt hammer rebound value of 36. According to durability tests, Lefke stone is resistant to CaCl₂ salt mist but has low resistance to SO₂ aging. Salt crystals placed in the discontinuities of the rock caused slight crack growth. The stone’s resistance to crystallization of sodium sulphate salt is low, and an increase in the volume of salts crystallized in the rock results in low corner strengths. A capillary water-absorption value of 0.0016 kg/m².h places Lefke stone into the category of very low water absorption capacity and permeability. The water vapor diffusion resistance factor (μ) less than 1 indicates that the sandstone has high breathability. Its performance in historical buildings, field observations, and values obtained through laboratory tests confirm that Lefke sandstone can be used as a building stone.

     

Hot boning of intact carcasses: a procedure to avoid central nervous system self-contamination in beef and beef products

Compared with traditional boning of split refrigerated carcasses, hot boning of intact carcasses (the removal of meat from the skeleton prerigor) provides several commercially important cuts, may improve quality and reduce refrigeration costs, and may reduce the contamination of carcasses with central nervous system (CNS) tissue. In a comparative study of hot boning of intact and split carcasses, the CNS tissue contamination of intact carcasses was negligible (as measured with the CNS-related proteins glial fibrillary acidic protein and S-100 protein), but split carcasses were highly contaminated. The same trends were observed for dissection worktables used during the boning process. Most current boning plants have processing lines that are organized for boning carcass quarters, where the carcasses, in addition to transversal division, also are split horizontally. This part of the boning process was incorporated in the design of our study. Nine of the 18 intact carcasses were split horizontally between thoracic vertebrae 10 and 11 before they were hot boned. CNS tissue contamination was not detected on the carcass site related to this procedure. The amount of CNS tissue contamination was similar in boned cuts and minced meat from split and intact carcasses, except in the forerib. Boning of split carcasses appears to reduce CNS tissue contamination significantly to a level comparable to that of intact hot-boned carcasses.     

A decision support system for locating weapon and radar positions in stationary point air defence

In this study, a decision support system (DSS) based on the interactive use of location models and geographical information systems (GIS) was developed to determine the optimal positions for air defence weapons and radars. In the location model, the fire units are considered as the facilities to be located and the possible approach routes of air vehicles are treated as demand points. Considering the probability that fire by the units will miss the targets, the objective of the problem is to determine the positions that provide coverage of the approach routes of the maximum number of weapons while considering the military principles regarding the tactical use and deployment of units. In comparison with the conventional method, the proposed methodology presents a more reliable, faster, and more efficient solution. On the other hand, owing to the DSS, a battery commander who is responsible for air defence becomes capable of determining the optimal weapon and radar positions, among the alternative ones he has identified, that cover the possible approach routes maximally. Additionally, he attains the capability of making such decisions in a very short time without going to the field over which he will perform the defence and hence without being subject to enemy threats. In the decision support system, the digital elevation model is analysed using Map Objects 2.0, the mathematical model is solved using LINGO 4.0 optimization software, and the user interface and data transfer are supported by Visual Basic 6.0.     

Simulation of throughput from remote batch entry terminals

Operation of the remote batch terminals connected to an IBM 370/158 computer system at a large mid-western firm is simulated using GPSS language. The performance of the computer system was simulated to determine the impact of changes to be imposed on the system. The model parameters of remote printer speed and core storage capacity were altered during the course of the simulation. These variables were selected for their flexibility in relationship to the total network and the relative ease of implementing such changes. It is found that implementing higher speed printers and increased computer core storage capacity can decrease printer and core storage utilizations and the average service rate drastically.