金属材料中的稀土元素

本文论述了俄罗斯对稀土元素在高强度钢、高温合金、铝合金、镁合金、粉末冶金和磁性材料中的应用及其发展。     

运行诱发给水系统振动的根本原因分析

对于给水系统，必须进行振动测量可观察到的振幅，以避免疲劳问题。为了寻找根本原因，在电厂正常运行阶段进行了压力、扭矩和转动速度的专门测量。对测量结果的评估和分析证明管道振动是由流体震荡引起，而流体震荡本身又是由于泵驱动的扭矩波动激起，其它激振原因可以被明确地排除。对泵的准稳态运行进行了数值模拟计算，确认了上述结论。用管系的一维压力波动程序建立了系统和泵的计算模型，通过这种方法，验证了计算手段在寻找问题的解决途径和提出改进措施方面的优势。     

Positron emission tomography with a large axial acceptance angle: signal-to-noise considerations

A volume imaging positron emission tomography (PET) scanner with a large acceptance angle, such as the PENN-PET, offers fine spatial sampling and resolution in three dimensions, and a high sensitivity because of the inclusion of all cross-plane rays. The signal-to-noise ratio (SNR) is used to evaluate image quality for different scanning conditions of the PENN-PET using an activated cylindrical phantom with cold spheres of various sizes. Raising the energy threshold to 400 keV improves the SNR by lowering the scatter fraction, though it also reduces the sensitivity. Increasing the axial acceptance angle from +/-1.3 degrees to +/-6.5 degrees improves the SNR by increasing the sensitivity, even with a two-dimensional reconstruction algorithm, which compromises spatial resolution in the axial direction for points at the edge of the radial field of view. Initial results show that a three-dimensional reconstruction offers an improved SNR over a two-dimensional reconstruction that does not use all cross-plane rays.     

High speed two-dimensional optical beam position detector

Disclosed is the design of a high speed two-dimensional optical beam position detector which outputs the X and Y displacement and total intensity linearly. The experimental detector measures the displacement from DC to 123 MHz and the intensity of an optical spot in a similar way as a conventional quadrant photodiode detector. The design uses four discrete photodiodes and simple dedicated optics for the position decomposition which enables higher spatial accuracy and faster electronic processing than conventional detectors. Measurements of the frequency response and the spatial sensitivity demonstrate high suitability for atomic force microscopy, scanning probe data storage applications, and wideband wavefront sensing. The operation principle allows for position measurements up to 20 GHz and more in bandwidth.     

Conditions and constraints of food processing in space

Requirements and constraints of food processing in space include a balanced diet, food variety, stability for storage, hardware weight and volume, plant performance, build-up of microorganisms, and waste processing. Lunar, Martian, and space station environmental conditions include variations in atmosphere, day length, temperature, gravity, magnetic field, and radiation environment. Weightlessness affects fluid behavior, heat transfer, and mass transfer. Concerns about microbial behavior include survival on Martian and lunar surfaces and in enclosed environments. Many present technologies can be adapted to meet space conditions.     

Stray Light Rejection in Rotational Coherent Anti-Stokes Raman Spectroscopy by use of a Sodium-Seeded Flame

A common experimental problem with rotational coherent anti-Stokes Raman spectroscopy (CARS) is undesired spectral interference that is due to stray light from the primary laser beams. Also, for the most developed approach, dual-broadband rotational CARS, practical measurements often suffer from stray light interference from the narrow-band laser, inasmuch as the CARS signal is produced inherently in the spectral vicinity of the narrow-band laser beam. An optical filter does not provide a sufficiently sharp transmission profile, thus leading to signal loss and spectral distortion of the rotational CARS signal. An atomic filter consisting of a sodium-seeded flame is presented here as a solution to the problem, and its usefulness was demonstrated in dual-broadband rotational CARS experiments.     

Folded free-space polarization-controlled multistage interconnection network

We present a folded free-space polarization-controlled optical multistage interconnection network (MIN) based on a dilated bypass-exchange switch (DBS) design that uses compact polarization-selective diffractive optical elements (PDOE's). The folded MIN design has several advantages over that of the traditional transparent MIN, including compactness, spatial filtering of unwanted higher-order diffraction terms leading to an improved signal-to-noise ratio (SNR), and ease of alignment. We experimentally characterize a folded 2 x 2 switch, as well as a 4 x 4 and an 8 x 8 folded MIN that we have designed and fabricated. We fabricated an array of off-axis Fresnel lenslet PDOE's with a 30:1 SNR and used it to construct a 2 x 2 DBS with a measured SNR of 60:1. Using this PDOE array in a 4 x 4 MIN resulted in an increased SNR of 120:1, highlighting the filtering effect of the folded design.     

Two-tone frequency modulation spectroscopy from laser light scattered off a hard target

One can apply two-tone frequency modulation spectroscopy techniques to the detection of gas-phase species by using laser light scattered from hard targets. High sensitivities are demonstrated, with a minimum detectable absorption of 10(-4) possible with a simple apparatus. The effects of laser speckle on the FM signal are described, and we show that the detection signal-to-noise ratio can be improved by collecting an increased number of speckle cells.     

Atmospheric correction over case 2 waters with an iterative fitting algorithm

A modular atmospheric correction algorithm is proposed that uses atmospheric and water contents models to predict the visible and near-infrared reflectances observed by a satellite over water. These predicted values are compared with the satellite reflectances at each pixel, and the model parameters changed iteratively with an error minimization algorithm. The default atmospheric model uses single-scattering theory with a correction for multiple scattering based on lookup tables. With this model we used parameters of the proportions of three tropospheric aerosol types. For the default water content model we need the parameters of the concentrations of chlorophyll, inorganic sediment, and gelbstoff. The diffuse attenuation and backscatter coefficients attributed to these constituents are calculated and used to derive the water-leaving reflectance. Products include water-leaving reflectance, concentrations of water constituents, and aerosol optical depth and type. We demonstrate the application of the method to sea-viewing wide field-of-view sensor by using model data.