Development of an animal model for across-herd genetic evaluation of number born alive in swine

An animal model and computer software were developed to conduct across-herd genetic evaluations using data from producers participating in the Sow Productivity Index program of the American Yorkshire Club. The final data set consisted of 61,596 litter records from 1986 to early 1990. The animal model included fixed contemporary group effects and random additive direct, service sire, permanent environmental, and residual effects. Additive genetic relationships among animals were included. A separate relationship matrix for service sires and their sires was also included. A data set similar to the Yorkshire field data was simulated to use in testing the animal model. The simulated data set consisted of 40 herds, each with 120 reproducing dams and either four or five sires. Six generations of simulated data were produced, resulting in 20,605 litter records. These records were then evaluated using the animal model for number of pigs born alive. Finally, correlations between the true breeding values from the simulation and the predicted breeding values were computed. The correlation between the 918 true and predicted sire breeding values was considerably lower for the animal model without a service sire effect than when it was included (.53 vs .74, respectively). However, the difference was cut in half (.66 vs .77) when only sires with greater than five daughter records were included. The high accuracy of the animal model with a random service sire effect indicates that the proposed model adequately accounts for the variation found in records for number of pigs born alive.     

Effects of solid retention time on the performance of submerged anoxic/oxic membrane bioreactor.

In this study, four similar bench-scale submerged Anoxic/Oxic Membrane Bioreactors (MBR) were used simultaneously to investigate the effects of solids retention time (SRT) on organic and nitrogen removal in MBR for treating domestic wastewater. COD removal efficiencies in all reactors were consistently above 94% under steady state conditions. Complete conversion of NH(4+)-N to NO(3-)-N was readily achieved over a feed NH(4+)-N concentration range of 30 to 50 mg/L. It was also observed that SRT did not significantly affect the nitrification in the MBR systems investigated. The average denitrification efficiencies for the 3, 5, 10 and 20 days SRT operations were 43.9, 32.6, 47.5 and 66.5%, respectively. In general, the average effluent nitrogen concentrations, which were mainly nitrate, were about 22.2, 27.6, 21.7 and 13.9 mg/L for the 3, 5, 10 and 20 days SRT systems, respectively. The rate of membrane fouling at 3 days SRT operation was more rapid than that observed at 5 days SRT. No fouling was noted in the 10 days and 20 days SRT systems during the entire period of study.     

Evaluation of the efficacy of sequential intravenous-oral administration of pefloxacin in community-acquired lower respiratory tract infections in patients with underlying conditions

We studied the efficacy of sequential intravenous-oral pefloxacin therapy in community-acquired lower respiratory tract infection in 24 patients with one or more underlying conditions. Twenty-eight patients were enrolled into the study but only 24 patients were evaluated. There were 16 males and 8 females with a mean age of 66.9 +/- 11.2 years (mean +/- SD, range 46 to 87 years). The underlying conditions present were bronchiectasis, chronic obstructive lung disease and diabetes mellitus. Patients who were older than 70 years but without any underlying condition were also enrolled. All received 4 days of intravenous pefloxacin 400 mg twice a day followed by oral pefloxacin 400 mg twice a day for another 10 days. Assessment of success was based on clinical, microbiological and radiological improvement. Pefloxacin produced 79.2% clinical cure rate. Another 8.3% showed improvement. Pefloxacin was well tolerated. There were few adverse effects and none of the patients required a change of antibiotic. Pefloxacin was an effective and well tolerated treatment for respiratory tract infection and had the advantage of broad in-vitro antibacterial activity, twice daily dosing and sequential availability in an intravenous and oral formulation.     

Thermal challenges in next generation electronic systems - summary of panel presentations and discussions

The presentations made, as well as the discussions, in the panels at the workshop, Thermal Challenges in Next Generation Electronic Systems (THERMES), are summarized in this paper. The panels dealt with diverse topics including thermal management roadmaps, microscale cooling systems, numerical modeling from the component to system levels, hardware for future high performance and Internet computing architectures, and transport issues in the manufacturing of electronic packages. The focus of the panels was to identify barriers to further progress in each area that require the attention of the research community.     

Regulatory Light Chains in Cardiac Development and Disease

The role of regulatory light chains (RLCs) in cardiac muscle function has been elucidated progressively over the past decade. The RLCs are among the earliest expressed markers during cardiogenesis and persist through adulthood. Failing hearts have shown reduced RLC phosphorylation levels and that restoring baseline levels of RLC phosphorylation is necessary for generating optimal force of muscle contraction. The signalling mechanisms triggering changes in RLC phosphorylation levels during disease progression remain elusive. Uncovering this information may provide insights for better management of heart failure patients. Given the cardiac chamber-specific expression of RLC isoforms, ventricular RLCs have facilitated the identification of mature ventricular cardiomyocytes, opening up possibilities of regenerative medicine. This review consolidates the standing of RLCs in cardiac development and disease and highlights knowledge gaps and potential therapeutic advancements in targeting RLCs.     

Synergistic Effect of PVDF-Coated PCL-TCP Scaffolds and Pulsed Electromagnetic Field on Osteogenesis

Bone exhibits piezoelectric properties. Thus, electrical stimulations such as pulsed electromagnetic fields (PEMFs) and stimuli-responsive piezoelectric properties of scaffolds have been investigated separately to evaluate their efficacy in supporting osteogenesis. However, current understanding of cells responding under the combined influence of PEMF and piezoelectric properties in scaffolds is still lacking. Therefore, in this study, we fabricated piezoelectric scaffolds by functionalization of polycaprolactone-tricalcium phosphate (PCL-TCP) films with a polyvinylidene fluoride (PVDF) coating that is self-polarized by a modified breath-figure technique. The osteoinductive properties of these PVDF-coated PCL-TCP films on MC3T3-E1 cells were studied under the stimulation of PEMF. Piezoelectric and ferroelectric characterization demonstrated that scaffolds with piezoelectric coefficient d₃₃ = −1.2 pC/N were obtained at a powder dissolution temperature of 100 °C and coating relative humidity (RH) of 56%. DNA quantification showed that cell proliferation was significantly enhanced by PEMF as low as 0.6 mT and 50 Hz. Hydroxyapatite staining showed that cell mineralization was significantly enhanced by incorporation of PVDF coating. Gene expression study showed that the combination of PEMF and PVDF coating promoted late osteogenic gene expression marker most significantly. Collectively, our results suggest that the synergistic effects of PEMF and piezoelectric scaffolds on osteogenesis provide a promising alternative strategy for electrically augmented osteoinduction. The piezoelectric response of PVDF by PEMF, which could provide mechanical strain, is particularly interesting as it could deliver local mechanical stimulation to osteogenic cells using PEMF.     

Surface reconstruction techniques: a review

Surface reconstruction means that retrieve the data by scanning an object using a device such as laser scanner and construct it using the computer to gain back the soft copy of data on that particular object. It is a reverse process and is very useful especially when that particular object original data is missing without doing any backup. Hence, by doing so, the data can be recollected and can be stored for future purposes. The type of data can be in the form of structure or unstructured points. The accuracy of the reconstructed result should be concerned because if the result is incorrect, hence it will not exactly same like the original shape of the object. Therefore, suitable methods should be chosen based on the data used. Soft computing methods also have been used in the reconstruction field. This papers highlights the previous researches and methods that has been used in the surface reconstruction field.     

Synergic influence of a surfactant and ultrasonication on the preparation of soluble,conducting polydiphenylamine/silica‐nanoparticle composites

Conducting polydiphenylamine was used to encapsulate silica nanoparticles through the oxidative polymerization of diphenylamine in the presence of ultrasonic irradiation. The polymerization was performed in the presence of sodium lauryl sulfate as a surfactant. Experiments performed in the absence of ultrasound clearly demonstrated that the application of ultrasonication played multiple roles in the preparation of a composite of polydiphenylamine with silica nanoparticles. Ultrasonication dispersed the silica nanoparticles, converted sodium lauryl sulfate to lauryl alcohol, and augmented the dispersion of the silica‐nanoparticle/polydiphenylamine composite in an organic medium. Silica‐nanoparticle/polydiphenylamine composites were also prepared in the absence of ultrasound and/or sodium lauryl sulfate. The silica‐nanoparticle/polydiphenylamine composites were characterized with Fourier trans form infrared spectroscopy, ultraviolet–visible/near‐infrared spectroscopy, and thermogravimetric analysis. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 102: 3912–3918, 2006     

Face detection based on skin color likelihood

We propose a face detection method based on skin color likelihood via a boosting algorithm which emphasizes skin color information while deemphasizing non-skin color information. A stochastic model is adapted to compute the similarity between a color region and the skin color. Both Haar-like features and Local Binary Pattern (LBP) features are utilized to build a cascaded classifier. The boosted classifier is implemented based on skin color emphasis to localize the face region from a color image. Based on our experiments, the proposed method shows good tolerance to face pose variation and complex background with significant improvements over classical boosting-based classifiers in terms of total error rate performance.     

Effect of dispersity on the Tll (>Tg) transition in polystyrene

The presence of a high temperature (>T_g) relaxation in amorphous polystyrene has been investigated further. In the previous work,¹ the techniques of differential thermal analysis (DTA) and torsional braid analysis (TBA) were employed to study polystyrene as a function of “monodisperse” molecular weight. The occurrence of the T_ll transition appeared to be associated with the attainment of a critical viscosity level with also corresponded with a free volume level. An entanglement network developed at a critical value of molecular weight, M_c, giving a break in the T_ll-versus-M plots. The present work deals with the influence of dispersity on the T_ll transition, below and above M_c. A series of binary blends of “monodisperse” anionically polymerized polystyrenes with systematic changes in M?_n and heterogeneity index (M?_w/M?_n) was tested by TBA. The results show that when both components have molecular weights below M_c, single and average values of T_g and T_ll are observed which are linearly related to M?_n^?1, as predicted by free volume arguments. Although a single T_g is observed when one component has a molecular weight above and the other has a molecular weight below M_c, the components appear to undergo the T_ll relaxation independently. The results indicate that both the glass transition and the T_ll transition are basically governed by the same type of molecular motion but at different length ranges.