PES News

This paper presents a new method for the generation of a reference voltage for a dynamic voltage restorer (DVR). These voltages, when injected in series with a distribution feeder by a voltage source inverter, can tightly regulate the voltage at the load terminal against imbalance or harmonics in the source side. It is stipulated that the DVR does not supply any real power in the steady state. The reference voltage generation scheme is validated through digital computer simulation studies.     

Purification and some properties of a xylanase from Aspergillus sydowii MG49

Aspergillus sydowii MG49 produces a 30-kDa exosplitting xylobiohydrolase during growth on xylan. A specific chemical modification and substrate protection analysis of purified xylanase provided evidence that tryptophan and carboxy and amino groups are present at the catalytic site of this enzyme. Thermal inactivation of the xylanase occurs because of irreversible polymolecular aggregation, which is slower in the presence of glycerol.     

Screen‐printed biosensor for allergens

Allergen levels in indoor environments, leading to many diseases, eg asthma, rhinitis and conjunctivitis, affect a large and increasing fraction of the population. A quite effective and inexpensive method of a rough but very rapid overall assessment of total allergen level in the environment has been developed. The method involved estimation of protein in allergen extracts by screen‐printed electrodes using two different techniques. The biosensor comprised a rhodinised carbon working electrode, a silver/silver chloride reference electrode and a carbon counter electrode. In the first method the enzyme protease reacted with allergen protein to release amino acid, which produced hydrogen peroxide in the presence of amino acid oxidase. This was detected amperometrically. The second method used potassium bromide as electrolyte and the electrode was subjected to dual potential. Bromine, released due to electrolysis at higher potential, was consumed by the allergen protein at lower potential. In the first method, a unique technique was used to microencapsulate the enzyme protease and immobilise it on the surface of the electrode by in‐situ polymerisation to avoid contact with the amino acid oxidase. A total of seven allergens were tested and the results gave a good correlation with the standard protein measurement method. Environmental specimens from indoors, schools and workplaces can be evaluated for the aeroallergens produced by dust mites, animal hairs, cockroach debris, pollens, etc as a means of determining the exposure risk. Copyright © 2005 Society of Chemical Industry     

Detecting nondeterminacy in parallel programs

Methods and tools for detecting nondeterminacy in programs for shared-memory multiprocessors are discussed. The approach described divides the debugging chore into two phases. The first phase uses tools that automatically detect nondeterminacy to debug synchronization errors, assuming it is decided at the outset to make the parallel program determinate. At the end of this phase, it is known that the program is determinate, that timing differences will not affect results, and the debugging sessions are repeatable. In the second phase, an interactive break-point debugger is used to find arithmetic and logical errors. The proposed tools fall into two groups: those that statically analyze the source program and those that analyze an execution trace of the program     

Superplasticity in a high strength powder aluminum

The superplastic properties of a rapidly solidified, high strength P/M Al alloy and the same alloy reinforced with SiC particulates (SiC _p ) have been studied. To prepare superplastic test materials, a matrix alloy powder of composition 7.2Zn-2.4Mg-2Cu-0.2Zr-0.12Cr-0.2Co (Kaiser PM-64) and the powder mixed with 10 to 20 vol pct SiC _p (~5 μm diameter) were thermomechanically processed to very fine equiaxed grain structures of ~6 μm and ~8 μm, respectively. Superplasticity in these materials was evaluated by characterizing (1) high temperature stability, (2) dynamic grain growth, (3) strain rate sensitivity, (4) flow stress behavior, (5) cavitation and cavitation control, and (6) total superplastic strain. It was observed that the PM-64 alloy could achieve a total elongation of over 800 pct, while the SiC_p reinforced alloy could attain an elongation greater than 500 pct before failure. Also, it was shown that with the use of hydrostatic pressure during superplastic flow, cavitation could be controlled. Observations were made of the effect SiC _p reinforcement particles had on the superplastic flow stress behavior. Interpretations are proposed to explain the role of particulates during superplastic straining.     

Envelope glycoprotein gp120 of human immunodeficiency virus type 1 alters ion transport in astrocytes: implications for AIDS dementia complex

Infection by human immunodeficiency virus type 1 (HIV-1) is often complicated by a variety of neurological abnormalities. The most common clinical syndrome, termed acquired immunodeficiency syndrome (AIDS) dementia complex, presents as a subcortical dementia with cognitive, motor, and behavioral disturbances and is unique to HIV-1 infection. The pathogenesis of this syndrome is poorly understood but is believed to involve interactions among virally infected macrophages/microglia, astrocytes, and neurons. In this study, we show that exposure of primary rat and human astrocytes to heat-activated HIV-1 virions, or to eukaryotically expressed HIV-1 and HIV-2 envelope glycoproteins (gp120) stimulates amiloride-sensitive Na+/H+ antiport, potassium conductance, and glutamate efflux. These effects are blocked specifically by amiloride, an inhibitor of Na+/H+ antiport and by the selective removal of gp120 with immobilized monoclonal antibody. As a result of modulation of astrocytic function by gp120, the ensuing neuronal depolarization and glutamate exposure could activate both voltage-gated and N-methyl-D-aspartate-regulated Ca2+ channels, leading to increases in intraneuronal Ca2+ and neuronal death. These findings implicate the astrocyte directly in the pathogenesis of AIDS dementia complex.     

Studies on jute–asphalt composites

The tensile properties of jute make it a suitable raw material for asphalt overlay (A/O) fabric. In this study, the thermal stability of jute under conditions of asphalt overlaying process was investigated and the compatibility of jute with asphalt was assessed through experimentation on jute–asphalt composites under mechanical and hygral loads. Fourier transform infra red (FTIR) spectroscopic study revealed probable chemical bonding between jute and asphalt. The test for ascertaining the capability of asphalt encasement for protecting jute against biodegradation under enzymatic attack was found positive. A 6‐month hygral treatment, of the jute–asphalt composite, showed significant increase in modulus of the material. The results indicate that although the strength of jute deteriorates by about 10% under asphalt overlaying condition, the overall tensile behavior of jute fabric–asphalt composite material is considerably superior to that of the pure jute fabric, even under biological and extended hygral loading conditions. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci 2008     

A study on dynamic friction of different spun yarns

This article presents the results from a study of yarn-to-yarn (YY) and yarn-to-metal (YM) frictions conducted on ring, rotor, air-jet, and open-end friction (OE friction) spun yarns at different relative speeds and input tensions. The results indicate that the behavior of frictions for YY is different than that of YM. In case of YY friction, OE friction yarn shows maximum friction followed by rotor, air-jet, and ring spun yarns; however, a reverse order is noticed for YM friction. The relative speed and input tension have significant influence on the frictional behavior of spun yarns. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008